No photo available yet

Agilent Technologies ·Made in USA · In Active Production

Agilent Technologies IMG-300 UHV Inverted Magnetron Gauge

Agilent Technologies IMG-300 UHV Inverted Magnetron Gauge — Vacuum technologies.

The IMG-300 is an inverted magnetron gauge for UHV pressure measurement, positioned in the Agilent Vacuum Transducers series above the 571/572 Bayard-Alpert tubes and 531/536 thermocouple gauges. It is intended for high- and ultra-high-vacuum systems where lower-pressure coverage than hot-cathode BA gauges is required. No electrical, range, or mechanical specifications are provided in the verified facts.

Agilent Technologies Vacuum Transducers Series — Model Comparison & Selection

Model Measurement rangeAtomic mass unit, gramsElectron charge, coulombMolar volume, litersMax pressure, megapascalSensitivity
IMG-300 UHV Inverted Magnetron Gauge Current —1.66160222.41——
531 Thermocouple Gauge, Rough Vacuum Pressure Measurement —1.66160222.41——
571 Bayard-Alpert Gauge Tube -3...21.66160222.411.33×10⁻⁴17
572 Tungsten Bayard-Alpert Gauge -3...21.66160222.41-3...2—
Cold Cathode Gauge Tube 525, High Vacuum (HV) Gauge —1.66160222.41——
Hot Filament Gauge MBA2-201, Ionization BA Gauge —1.66160222.41——
IMG-100 Inverted Magnetron Gauge —1.66160222.41——
UHV-24/UHV-24p 11.66160222.41—25

Full specifications

Core Performance & Functional Specifications
Electron Charge 1.602 coulomb
Molar Volume 22.41 liters
Acceleration due to gravity mfr 9.8066
Angstrom unit mfr 10 m
Avogadro's number mfr 6.02214076
Boltzmann's constant mfr 1.38064852
Equivalent of heat mfr 4.185
Natural log base mfr 2.7183
Velocity of light mfr 2.9979
Velocity of sound mfr 343
Magnetic flux density mfr 1
Pressure conversion mfr 1 Torr
Pumping speed conversion mfr 1 L/s
Throughput conversion mfr 1 cc/sec
Outgassing rate mfr 2
Dimensions, Weight & Mechanical Design
Atomic Mass Unit 1.6605 grams
Standards, Safety & General Data
Standard pressure mfr 101325 Pa

Description

Construction and series positioning

Behavior and measurement

Installation and operation

Integration & Operating Notes

Process Limits
Do not apply sibling pressure ranges to this gauge

The only pressure ranges in the verified facts belong to the 571 and 572 Bayard-Alpert tubes (-3...2 Torr). No range is given for the IMG-300, so the engineer must obtain the IMG-300 datasheet before defining the operating envelope or interlock thresholds.

Factory Specification Sheet (sibling_models data
Electrical
Supply and signal interface not defined in available facts

No voltage, current, connector, or output-signal specification is present for the IMG-300. Cable and controller selection cannot be finalized from the supplied documents; request the model-specific instruction manual.

Factory Specification Sheet
Maintenance
Service intervals and consumables are not documented here

The attached PDFs are a product portfolio leaflet and a formulas/tables reference; neither contains maintenance schedules, error codes, or spare-parts lists for the IMG-300. Maintenance planning must rely on the gauge-specific manual.

Agilent UHV and leak detection solutions leaflet 5994-8433EN; Formulas and Tables booklet 5994-5366EN

Selection & Integration Q&A

When should I choose the IMG-300 instead of the 571/572 Bayard-Alpert tubes or the 531/536 thermocouple gauges?

The IMG-300 is the inverted magnetron (cold-cathode) UHV modification. Choose it for UHV-oriented measurement; choose 531/536 thermocouple gauges for rough vacuum and 571/572 BA tubes for their stated -3...2 Torr range. No IMG-300 range is given in the verified facts, so confirm coverage before ordering.

What controller, cable, or power supply does the IMG-300 require?

The verified facts contain no electrical specification, connector type, or controller compatibility for the IMG-300. The attached portfolio leaflet lists ion pump controllers (IPCMini) and turbo pump controllers but does not link them to this gauge. Obtain the IMG-300 manual to select supply and readout electronics.

What mounting and duty-cycle limits apply to the IMG-300?

No flange, orientation, bakeout, ambient-temperature, or duty-cycle data for the IMG-300 appears in the verified facts or the two attached PDFs. These must be taken from the gauge-specific instruction manual before mechanical integration into the vacuum chamber.

What maintenance schedule and accessories are included with the IMG-300?

The verified facts list no maintenance intervals, spare parts, cables, or consumables for the IMG-300. The portfolio leaflet mentions spare parts and service options generally but gives no IMG-300-specific items. Confirm delivery scope and service plan with the supplier.

Dimensional Drawings & Technical Documentation

Technical documentation