No photo available yet
Agilent Technologies LDIR Chemical Imaging, IR & Imaging Spectroscopy
Agilent Technologies LDIR Chemical Imaging, IR & Imaging Spectroscopy — Molecular spectroscopy.
The Agilent 8700 LDIR is a quantum-cascade-laser direct-infrared imaging system for automated microplastic and particle analysis. It covers 1800–975 cm⁻¹ with a thermoelectrically cooled MCT detector and acquires a full spectrum in under one second. It is positioned within the Molecular Spectroscopy series for chemical imaging of 20–600 µm particles on aluminum-coated polyester membranes.
Agilent Technologies Molecular Spectroscopy Series — Model Comparison & Selection
| Model | Wavelength range | Sample volume, milliliter | Absorbance error, % | Atr path length, µm | Atr surface diameter, mm | Certified absorbance value of filter |
|---|---|---|---|---|---|---|
| LDIR Chemical Imaging, IR & Imaging Spectroscopy Current | — | — | — | — | — | — |
| Fluorescence Spectroscopy Instrumentation, Spectrofluorometers | 900 | — | — | — | — | — |
| FTIR Spectroscopy Equipment | 5100...600 | 0.02 | — | 2.6 | 2.5 | — |
| UV-Vis & UV-Vis-NIR Spectroscopy, Cary Instruments | — | — | 0.189 | — | — | 0.369 |
Full specifications
| Filter Pore Size | 0.8 µm |
| Wavenumber range mfr | 1800...975 |
| Infrared source mfr | semiconductor-based quantum cascade laser laser |
| Detector mfr | single-point, thermoelectrically cooled mercury |
| Full spectrum acquisition time mfr | less than one second s s |
| Studied particle size range mfr | 20...600 μm |
| Scanned area, sample 1 (red and white plastic) mfr | 3.04 |
| Scanned area, sample 2 (yellow film) mfr | 3.76 |
| Substrate mfr | 7.5 cm |
| Instrument mfr | 8700 LDIR |
| Analysis method mfr | Particle Analysis Analysis |
| Spectral library mfr | inbuilt microplastics spectral library library |
| Filter type mfr | aluminum-coated polyester membrane membrane |
| Sample preparation mfr | imal imal |
| Quality control mfr | procedural blanks recommended recommended |
| Particles detected mfr | 660 |
| Particles with HQI > 0.85 mfr | 50 |
| Most prevalent polymers mfr | PVC and PET PET |
Description
Construction and positioning
- The 8700 LDIR uses a semiconductor-based quantum cascade laser as the infrared source and a single-point, thermoelectrically cooled mercury cadmium telluride detector, covering 1800–975 cm⁻¹.
- Within the Molecular Spectroscopy series it is the chemical-imaging modification, distinct from the FTIR (5100–600 cm⁻¹), Raman (spatially offset Raman), UV-Vis/UV-Vis-NIR (Cary), and fluorescence spectrofluorometer siblings. It is intended for spatially resolved particle identification rather than bulk spectroscopy.
Behavior and analysis mode
- Full spectra are acquired in less than one second, enabling automated particle analysis over the 20–600 µm size range.
- Analysis uses the inbuilt microplastics spectral library; in the documented beach-sample runs, 660 particles were detected and 50 exceeded HQI 0.85, with PVC and PET the most prevalent polymers.
- Samples are presented on 0.8 µm aluminum-coated polyester membranes; scanned areas of 3.04 and 3.76 (sample 1 red/white plastic, sample 2 yellow film) are reported, with a 7.5 cm substrate.
Operation and control
- The application notes describe use with Agilent Clarity software for data acquisition and library matching, including turmeric adulteration screening.
- Procedural blanks are recommended for quality control. Sample preparation is described as minimal in the supplied application material.
Integration & Operating Notes
Procedural blanks are recommended as quality control to distinguish sample-derived particles from background contamination; without them, particle counts and polymer assignments cannot be confidently attributed to the sample.
The application notes describe operation with Agilent Clarity software for spectral acquisition and comparison against the inbuilt microplastics spectral library; the software environment is therefore part of the analysis chain and must be planned for in the laboratory IT setup.
Selection & Integration Q&A
Choose the 8700 LDIR for automated imaging and identification of 20–600 µm particles on membrane filters, using the 1800–975 cm⁻¹ QCL range and inbuilt microplastics library. The FTIR sibling covers 5100–600 cm⁻¹ for broader bulk spectra, and the Raman sibling uses spatially offset Raman; select those when their spectral range or technique is required rather than particle imaging.
Samples are collected on 0.8 µm aluminum-coated polyester membranes, which serve as the reflective substrate for the laser measurement. Procedural blanks should be prepared alongside samples for quality control. The supplied facts do not list membranes, blanks, or other consumables as part of base delivery, so they must be sourced separately.
Plan for procedural blanks with each batch to control contamination, and for Agilent Clarity software for acquisition and library matching. The application notes report 660 particles detected with 50 above HQI 0.85 in a beach-sample run, so HQI thresholds should be set as part of the analysis method. No service intervals or accessory lists are given in the supplied documents.