Elmo Rietschle IDS
Elmo Rietschle ·Made in Germany · In Active Production

Elmo Rietschle IDS

Elmo Rietschle IDS — Screw Vacuum Pumps.

The Elmo Rietschle IDS is a dry screw vacuum pump with a contact-free, oil-free pumping chamber. The IDS 850 and IDS 1100 variants are water-cooled as standard, with air cooling available on request; the IDS 850 is fixed-speed and the IDS 1100 is variable-speed. It is used where oil-free vacuum is required and condensable or particle-laden gases must be handled without lubricant contamination.

Full specifications

Core Performance & Functional Specifications
Lubrication type dry
Operating principle dry screw

Description

Construction and series positioning

Behavior under load and media

Installation, connection, and operation

Integration & Operating Notes

Process Limits
No verified gas compatibility or particle limits are available

The verified facts do not state allowable inlet gas temperature, particle loading, condensate tolerance, or solvent compatibility. These must be obtained from the full manual or factory before applying the pump to a process stream, because exceeding unstated limits can damage the screw set or seals.

Factory Specification Sheet

Selection & Integration Q&A

When should I choose the IDS 850 instead of the IDS 1100?

Choose the IDS 850 when the process runs at a fixed operating point and does not need speed turndown. Choose the IDS 1100 when variable speed is required for process control or energy saving; it is the variable-speed variant of the same dry screw series.

What are the mounting and environment limits for the IDS?

The verified facts do not state ambient temperature, altitude, or mounting orientation limits. These must be confirmed from the full instruction manual before installation; do not assume indoor/outdoor or high-altitude suitability without factory confirmation.

What maintenance and accessories are required but not included in the base delivery?

No maintenance schedule, spare parts list, or accessory scope is given in the verified facts. Cooling water connections, inlet filtration, and control hardware for the IDS 1100 must be confirmed against the order-specific documentation; they are not described as part of the base pump delivery.

Dimensional Drawings & Technical Documentation

Technical documentation

PDF
IR ER IDS Launch Assets Digital Brochure
Datasheet ·3,7 МБ ·6 pp.
View PDF