Elmo Rietschle VSI 301
Elmo Rietschle ·Made in Germany · In Active Production

Elmo Rietschle VSI 301

Elmo Rietschle VSI 301 — Screw Vacuum Pumps with Motor power 9 kW, Pumping speed 360 m³/h, Ultimate pressure 0.08 mbar.

The S-VSI 301 is a dry-running twin-screw vacuum pump with continuous flow cooling (variant 01) or circulation cooling (31/61), achieving 300 m³/h at 50 Hz and 0.08 mbar ultimate pressure. It is distinguished within the VSI series by its 5.5/7.5/9.0 kW motor options and water-based cooling, serving as a high-capacity primary pump for humid or aggressive gas evacuation.

Motor power
9 kW
Pumping speed
360 m³/h
Ultimate pressure
0.08 mbar

Elmo Rietschle VSI Series — Model Comparison & Selection

Model Motor power, kWPumping speed, m³/hUltimate pressure, mbarHeight, mmLength, mmNoise level, dB
VSI 301 Current 93000.08124983975
VSI 100 31380.1404108275
VSI 300 5.53200.1580129774

Full specifications

Core Performance & Functional Specifications
Motor power 7.5 kW (50 Hz | UL IE3)
60 Hz | UL IE3: 9.0 kW · 50 Hz | NI IE4: 5.5 kW · 50 Hz | NL IE4: 7.5 kW · 60 Hz | NL IE4: 9.0 kW
Pumping speed 300 m³/h (50 Hz)
60 Hz: 360 m³/h
Ultimate pressure 0.08 mbar
Rotational speed 2930 rpm (50 Hz | UL IE3)
60 Hz | UL IE3: 3530 rpm · 50 Hz | NI IE4: 2935 rpm · 50 Hz | NL IE4: 2945 rpm · 60 Hz | NL IE4: 3540 rpm
Vacuum connection mfr G 2
Exhaust mfr G 2
Condensate drain mfr G 1/2
Dimensions, Weight & Mechanical Design
Height 1246 mm (version 301 (01) | motor NI)
version 301 (01) | motor NL: 1249 mm · version 301 (01) | motor UL: 1249 mm
Length 838 mm (version 301 (01) | motor NI)
version 301 (01) | motor NL: 839 mm · version 301 (01) | motor UL: 839 mm
Weight 267 kg (version 301 (01))
version 301 (31): 307 kg
Width 360 mm
Materials, Media & Process Compatibility
Oil capacity 1.4 l (H)
H1 (H variant 0.8 / H1 variant 0.6): 0.8 l · H1: 0.6 l
Operating Conditions, Environment & Protection
Noise level 73 dB (50 Hz | version 301 (01))
60 Hz | version 301 (01): 75 dB · 50 Hz | version 301 (31): 76 dB · 60 Hz | version 301 (31): 78 dB
Operating temperature 45 °C
Cooling type water
Cooling method mfr Continuous flow cooling (01) / circulation cooli
Cooling water inlet/outlet mfr G 1/2

Description

Construction and Series Positioning

The S-VSI 301 is a screw vacuum pump with two dry-running rotors, driven via an elastomer coupling from an IE3/IE4 motor. The compression chamber is separated from the gearbox by special seals with a ventilated intermediate compartment. The VSI 301 delivers a pumping speed of 300 m³/h at 50 Hz (360 m³/h at 60 Hz) and an ultimate pressure of 0.08 mbar. Motor power options are 5.5 kW (50 Hz, NI IE4), 7.5 kW (50 Hz, UL IE3 or NL IE4), and 9.0 kW (60 Hz, UL IE3 or NL IE4). Cooling is water-based: continuous flow cooling (01), circulation cooling with water-air heat exchanger (31), or circulation cooling with water-water heat exchanger (61).

Behavior Under Load and Media

Installation, Connection, and Control

Integration & Operating Notes

Mounting
Maximum inclination during operation is 8°; during transport 10°

The pump must be installed horizontally with a maximum inclination of 8° in all directions to ensure proper lubrication and operation. During transport, the maximum inclination is 10°. Ensure the mounting surface is flat and level within these tolerances.

Operating Instructions BA 834-PT, Section 5.2, page 25; BA 834-EN, Section 3.1, page 13
Process Limits
Ambient and inlet temperature must be between 5 °C and 40 °C

Operation outside this range requires consultation with the manufacturer. Ensure installation room ventilation and process gas cooling keep temperatures within this range. For installation above 1000 m above sea level, performance decreases; contact the manufacturer.

Operating Instructions BA 834-EN, Section 2.4, page 9; BA 834-PT, Section 5.2, page 25

Selection & Integration Q&A

When should I choose the VSI 301 over the VSI 300 or VSI 100?

Choose VSI 301 for 300 m³/h at 50 Hz and 0.08 mbar ultimate, with water cooling. VSI 300 offers 320 m³/h but 0.1 mbar; VSI 100 is smaller at 110 m³/h. Select VSI 301 for lower ultimate pressure or water-based cooling needs; note that its pumping speed is lower than the VSI 300's.

What are the requirements for the cooling water circuit when using the water-water heat exchanger variant?

Cooling water inlet temperature must be 10–30 °C, pressure at the plate heat exchanger ≤10 bar, and supply pressure at the pump 0.6–1.2 bar. Install filters with max. mesh size 0.1 mm at the heat exchanger inlets.

What maintenance items and accessories are not included in the base delivery?

Base delivery excludes sealing gas unit, gas ballast valve, and frequency converter. Spare parts (e.g., filters, oil) must be ordered separately using the spare parts list E 834. Regular maintenance includes oil changes, air filter cleaning, and cooling system checks.

Dimensional Drawings & Technical Documentation

Technical documentation

PDF
Operating Instructions — VSI 301 vacuum pump (BA 834-EN, ed. 1.3 14.10.2021, EN)
Manual ·5,3 МБ ·52 pp.
View PDF
PDF
Operating Instructions — VSI 301 (BA 834-PT, EN)
Manual ·5,3 МБ ·52 pp.
View PDF
PDF
Technical Data Sheet — VSI 301 vacuum pump DE/EN)
Datasheet ·2,1 МБ ·6 pp.
View PDF
PDF
Spare Parts List — VSI 25 VSI 301 (E 834, EN)
Spare parts ·672,4 КБ ·4 pp.
View PDF