Nabertherm GF 240
Nabertherm ·Made in Germany · In Active Production

Nabertherm GF 240

Nabertherm GF 240 — Fusing furnaces.

The GF 240 is a fixed-table fusing furnace with a 1010 × 810 × 400 mm chamber and 950 °C maximum temperature, positioned as the largest sibling alongside the GF 75. Its 11 kW three-phase connection and 275 kg mass suit stationary integration into glass fusing or heat-treatment cells where the work is loaded onto a fixed hearth.

Nabertherm GF Series — Model Comparison & Selection

Model Electrical connectionMax temperature, °CWeight, kg
GF 240 Current 3-phase950275
GF 75 1-phase900180

Full specifications

Core Performance & Functional Specifications
Electrical connection 3-phase
Electrical connection 3-phase
Nominal power 11 kW
Floor space mfr 0.81
Inner dimensions (W × D × H) mfr 1010 × 810 × 400 mm
Outer dimensions (W × D × H) mfr 1460 × 1140 mm
Dimensions, Weight & Mechanical Design
Weight 275 kg
Weight 275 kg
Operating Conditions, Environment & Protection
Max temperature 950 °C
Max temperature 950 °C

Description

Construction and series positioning

Behavior and duty

Control and operation

Integration & Operating Notes

Mounting
Floor must carry 275 kg plus charge on a 0.81 m² footprint

The 275 kg unit weight is the empty furnace; the structural floor and any plinth must be assessed for the furnace mass plus the workload placed on the fixed table, and the 1460 × 1140 mm outer envelope must be kept clear for access and service.

Factory Specification Sheet
Process Limits
Chamber load must respect the 950 °C ceiling and fixed hearth

Because the table is fixed, the charge is placed and removed through the chamber opening; loading fixtures and glass charges must be sized to the 1010 × 810 × 400 mm envelope and the process recipe must not command setpoints above the 950 °C maximum.

Factory Specification Sheet

Selection & Integration Q&A

When should I choose the GF 240 rather than the smaller GF 75 in this fusing furnace series?

Choose the GF 240 when the work requires the 1010 × 810 × 400 mm chamber and the 950 °C / 11 kW large-frame capability; the GF 75 is the smaller sibling for reduced charge sizes. Confirm the 275 kg mass and 0.81 floor space fit the intended site before ordering.

What supply and controller infrastructure does the GF 240 need from the surrounding plant?

A 3-phase supply sized for the 11 kW nominal load, plus the Nabertherm 500-series controller environment described in the process-control documentation. The model-specific wiring diagram and thermocouple type are not in the supplied digests and must be obtained before connecting to plant control.

What maintenance and accessories are defined for the GF 240, and what is not included?

The supplied digests contain no GF 240-specific maintenance schedule, spare-parts list or included-accessory list. Controller and recorder options are described only at the 500-series family level; consumables, cables and fixtures must be specified separately from the model manual.

Dimensional Drawings & Technical Documentation

Technical documentation

PDF
Prozesssteuerung englisch
Brochure ·2,8 МБ ·20 pp.
View PDF
PDF
Fiber optics glass english 0
Brochure ·10,3 МБ ·97 pp.
View PDF
PDF
Foundry english
Brochure ·4,2 МБ ·52 pp.
View PDF
PDF
Dental english
Brochure ·13,1 МБ ·72 pp.
View PDF