Nabertherm HT 64/17
Nabertherm HT 64/17 — High-temperature furnaces.
The HT 64/17 is a 64-litre high-temperature chamber furnace with molybdenum disilicide heating elements and fiber insulation, rated to 1750 °C on a 3-phase supply. Its 400 × 400 × 400 mm chamber distinguishes it from the 16-, 29- and 160-litre siblings in the HT 17 series. It serves laboratory and pilot-scale sintering, annealing and melting where uniform high temperature is required.
Nabertherm High-Temperature Furnaces with Molybdenum Disilicide Heating Elements with Fiber Insulation up to 1800 °C | Nabertherm Series — Model Comparison & Selection
Full specifications
| Chamber volume | 64 l |
| Chamber volume | 64 l |
| Electrical connection | 3-phase |
| Electrical connection | 3-phase |
| Connected mfr | 18.5 |
| Inner dimensions (W × D × H) mfr | 400 × 400 × 400 mm |
| Outer dimensions (W × D × H) mfr | 1140 × 890 × 2040 mm |
| Weight | 555 kg |
| Weight | 555 kg |
| Max temperature | 1750 °C |
| Max temperature | 1750 °C |
Description
Construction and series positioning
- Chamber volume 64 l with inner dimensions 400 × 400 × 400 mm; outer dimensions 1140 × 890 × 2040 mm; weight 555 kg.
- Molybdenum disilicide (MoSi2) heating elements combined with fiber insulation, per the series designation, for a maximum working temperature of 1750 °C.
- Within the HT 17 series the model sits between the HT 29/17 and HT 160/17; the HFL 16/17 and HFL 160/17 are separate series variants and should not be substituted when the HT chamber geometry is required.
Behavior and media
- No digitized heating or cooling curves were supplied for this model, so no ramp rates or uniformity figures are stated here; process design must rely on the controller program and on-site verification.
- The 1750 °C ceiling is the governing process limit; the fiber insulation and MoSi2 elements define the usable atmosphere and loading regime, which are not further specified in the available facts.
Installation, connection and control
- Electrical connection is 3-phase; the connected load is listed as 18.5 (unit not printed in the source), so the supply and protection rating must be confirmed against the nameplate before installation.
- The attached controller documentation covers the Nabertherm 500 series and the MyNabertherm app, including process-data storage and AMS2750F instrumentation types; recorder and controller options are documented there rather than fixed by this model card.
- The remaining attached digests (fiber-optics glass, foundry, dental) describe other product lines and contain no HT 64/17-specific installation facts.
Integration & Operating Notes
The maximum temperature of 1750 °C is the ceiling for the MoSi2 elements and fiber insulation. Controller programs and over-temperature protection should be configured so that this limit cannot be exceeded, since operation above it risks element and insulation damage.
Selection & Integration Q&A
Pick the HT 64/17 when the 400 × 400 × 400 mm, 64-litre chamber fits the workload. The HT 29/17 suits smaller batches; the HT 160/17 is for larger volumes. All share the 1750 °C class, so the choice is chamber size and batch geometry, not temperature.
The unit is 3-phase with a connected value listed as 18.5 without a printed unit. The installing electrician must verify voltage, current and power on the nameplate and size the feeder and protection to those values rather than to the datasheet figure.
Controller functions, process-data storage, AMS2750F instrumentation types and recorder options are covered in the 500-series/MyNabertherm documentation. These are order-time selections; the base furnace model code does not fix them, so they must be defined during configuration.
The available documents do not list a maintenance schedule, spare heating elements or consumables for the HT 64/17. MoSi2 elements are wear parts by nature, but no replacement interval or included accessory set is stated in the verified facts; these must be confirmed with the supplier.