Nabertherm LHT 01/17 LB Speed
Nabertherm LHT 01/17 LB Speed — Dental sintering furnaces.
The LHT 01/17 LB Speed is a single-phase lifting-table sintering furnace with a 95 × 130 mm charging area and a 75 × 110 × 60 mm work space, rated to 1650 °C at 3.6 kW. It is the smallest modification in the LHT../17 LB Speed series, distinguished from the LHT 02/17 LB Speed by its reduced chamber and 30 kg table load. It serves dental zirconia sintering and small high-temperature laboratory processes requiring rapid heating to 1000 °C at up to 60 °C/min.
Nabertherm LHT Series — Model Comparison & Selection
| Model | Maximum load, kg | Weight, kg | Electrical connection | Max temperature, °C |
|---|---|---|---|---|
| LHT 01/17 LB Speed Current | 30 | 45 | 1-phase | 1650 |
| LHT 02/17 LB Speed | 75 | 55 | 1-phase | 1650 |
Full specifications
| Electrical connection | 1-phase |
| Maximum load | 30 kg |
| Nominal power | 3.6 kW |
| Work space dimensions2 in mm mfr | 60 |
| Max. heating rate up to 1000 °C mfr | 60 |
| Outer dimensions (W × D × H) mfr | 350 × 590 × 695 mm |
| Weight | 45 kg |
| Charging area in mm mfr | 130 |
| Max temperature | 1650 °C |
Description
Construction and series positioning
- Lifting-table architecture: the charge sits on a 95 × 130 mm table that is raised into the heated chamber, giving a 75 × 110 × 60 mm work space.
- Single-phase, 3.6 kW electrical connection; 45 kg unit mass, 350 × 590 × 695 mm outer envelope.
- Within the LHT../17 LB Speed series, this is the smallest chamber: the sibling LHT 02/17 LB Speed offers a larger work space, so the 01/17 is selected when the dental arch or sample batch fits the 95 × 130 mm charging area and the 30 kg table limit.
Thermal behavior
- Maximum temperature 1650 °C, covering zirconia sintering regimes.
- Heating rate up to 1000 °C is specified at 60 °C/min; above 1000 °C the controller program governs the ramp, and no curve points are published for this model.
- The 30 kg maximum load is a table limit, not a chamber-volume limit; distribute the charge within the 95 × 130 mm charging area.
Control and operation
- The controller documentation covers the Nabertherm 500 series and MyNabertherm app, including process-data storage and AMS2750F instrumentation types; no furnace-specific wiring or program table is printed for the LHT 01/17 LB Speed.
- The dental brochure places the LHT../17 D and LHT 01/16 Turbo Fire in the dental sintering family; the LB Speed variant is not detailed there, so program parameters must come from the furnace-specific manual.
Integration & Operating Notes
The published heating rate of 60 °C/min applies up to 1000 °C. Above that temperature the achievable ramp depends on load mass and charge geometry, and the controller program must be set accordingly; do not assume 60 °C/min holds to the 1650 °C maximum.
Selection & Integration Q&A
Pick the 01/17 when the charge fits the 95 × 130 mm charging area and stays under 30 kg; its 75 × 110 × 60 mm work space and 3.6 kW single-phase draw suit small dental batches. Move to the LHT 02/17 LB Speed when a larger chamber is needed; both share the 1650 °C class.
It is a 1-phase, 3.6 kW unit. The verified facts do not print the operating voltage or current, so size the dedicated branch circuit, breaker and cable from the rating plate and local code, and allow for continuous resistive load rather than intermittent duty.
Maximum load is 30 kg on a 95 × 130 mm charging area feeding a 75 × 110 × 60 mm work space. Keep the mass centered within the charging footprint; an off-center or oversized charge can tilt the table as it enters the chamber and contact the heating elements.
The verified facts list no included accessories, cables, recorder or controller options. Controller functions such as process-data storage and AMS2750F instrumentation are documented as options in the 500-series/MyNabertherm material, so confirm the fitted controller and any recorder or cable against the order.