Nabertherm LHT 08/17
Nabertherm LHT 08/17 — High-temperature furnaces.
The LHT 08/17 is a high-temperature chamber furnace with an 8-litre, 200 × 200 × 200 mm chamber and MoSi₂ heating elements reaching 1750 °C, connected via a 3-phase supply drawing 6.70 kW. Within the LHT ../17 series it is the largest non-D variant, positioned above the 2- and 4-litre models and the D-equipped 1- and 3-litre siblings. It serves laboratory sintering, annealing and melting duties requiring clean, fast high-temperature cycles.
Nabertherm LHT Series — Model Comparison & Selection
Full specifications
| Chamber volume | 8 l |
| Electrical connection | 3-phase4 |
| Connected mfr | 6.70 |
| Heating time mfr | 50 min |
| Inner dimensions (W × D × H) mfr | 200 × 200 × 200 mm |
| Outer dimensions (W × D × H) mfr | 500 × 500 mm |
| Weight | 47 kg |
| Max temperature | 1750 °C |
Description
Construction and series positioning
- Chamber volume 8 l in a cubic 200 × 200 × 200 mm workspace; outer dimensions 500 × 500 mm (height not stated in the verified data).
- MoSi₂ heating elements, maximum working temperature 1750 °C, unit weight 47 kg.
- Within the LHT ../17 family the siblings are the LHT 01/17 D, LHT 02/17, LHT 03/17 D and LHT 04/17: this model offers the largest chamber of the listed group and, unlike the D-suffixed 01 and 03 models, carries no D designation in its code.
Thermal behaviour
- The only dynamic datum is a 50 min heating time; no curve points were supplied, so no statement is made about controlled cooling rates or uniformity across the chamber.
- The 1750 °C ceiling is the governing process limit; MoSi₂ elements are the enabling technology for this class of temperature.
Electrical and control
- Electrical connection is 3-phase (4-wire) with a connected load of 6.70 kW — the supply, fusing and cable cross-section must be engineered for this three-phase load, not a single-phase circuit.
- Controller and process-data functions are not specified for this model in the verified facts; the Nabertherm controller documentation in the source set describes the 500-series controllers and MyNabertherm app generically and prints no model-specific settings.
Integration & Operating Notes
The MoSi₂ element set and chamber insulation are rated to a 1750 °C maximum. Process recipes, over-temperature protection setpoints and controller limits must be configured so that the chamber never runs above this value, since exceeding it degrades the heating elements and invalidates results.
Selection & Integration Q&A
Pick the 08/17 when the 8-litre, 200 × 200 × 200 mm chamber is needed for larger or multiple charges at up to 1750 °C. The 01/17 D, 02/17, 03/17 D and 04/17 offer smaller chambers; the D-suffixed models differ in configuration, so compare their stated features before deciding.
A 3-phase 4-wire connection sized for the 6.70 kW connected load. The distribution board, protective device and cable cross-section must be engineered for this three-phase load; confirm the nameplate data on delivery before connecting.
The verified facts list only the furnace itself: 8-litre chamber, MoSi₂ elements, 3-phase connection, 47 kg. Controller type, process-data recording, over-temperature protection hardware and any connecting cable are not confirmed as part of base delivery and must be specified at order.