Waters ACQUITY QDa II - Single Quadrupole Mass Spec Detector
Waters ·Made in USA · In Active Production

Waters ACQUITY QDa II - Single Quadrupole Mass Spec Detector

Waters ACQUITY QDa II - Single Quadrupole Mass Spec Detector — Mass spectrometers.

The ACQUITY QDa II is a single quadrupole mass detector with a mass range of m/z 30–1250 and positive/negative electrospray ionization. It integrates with ACQUITY UPLC, ACQUITY Arc, and Alliance HPLC systems, providing mass confirmation for chromatographic peaks. Its compact design and ESI source make it suitable for routine LC-MS analyses in pharmaceutical and chemical laboratories.

Direct drop-in replacements

Shimadzu
Axima Assurance
0%
match
⚖️ Compare
Shimadzu
Axima Confidence
0%
match
⚖️ Compare
0%
match
⚖️ Compare
Shimadzu
GC-MS Qp2020 NX
0%
match
⚖️ Compare

Full specifications

Core Performance & Functional Specifications
Type single quadrupole
Ion source positive and negative electrospray ionization
Compatible chromatography systems mfr ACQUITY UPLC, ACQUITY Arc, Alliance HPLC
Dimensions, Weight & Mechanical Design
Mass range m/z 30 to 1250

Description

Construction and positioning

Integration & Operating Notes

Mounting
Requires bench space near the LC system

The QDa II is a benchtop detector that must be placed close to the LC system to minimize tubing length. Ensure adequate ventilation and access for maintenance. No specific mounting hardware is mentioned in the facts.

Factory Specification Sheet
Process Limits
ESI source compatible with volatile buffers

The electrospray ionization source typically requires volatile buffers and solvents to prevent contamination and maintain sensitivity. Avoid non-volatile salts and strong acids unless using appropriate ionization techniques. Refer to the manual for specific solvent compatibility.

Instruction Manual, Section on Solvent Compatibility

Selection & Integration Q&A

When should I choose the ACQUITY QDa II over other single quadrupole detectors?

The QDa II is specifically designed for integration with Waters ACQUITY UPLC, ACQUITY Arc, and Alliance HPLC systems, offering seamless control and data acquisition. Choose it when you need a compact, ESI-based single quadrupole for routine mass confirmation within a Waters chromatography workflow. For other LC brands or higher resolution requirements, consider alternative detectors.

What are the requirements for connecting the QDa II to my LC system?

The QDa II is compatible with ACQUITY UPLC, ACQUITY Arc, and Alliance HPLC systems. Connection typically involves plumbing the LC effluent to the ESI source and configuring the system software (e.g., MassLynx) for communication. Ensure the LC system is equipped with a suitable interface and that the QDa II is placed close to minimize dead volume.

What maintenance is required and what consumables are needed?

Regular maintenance includes cleaning the ESI source and replacing the ESI probe as needed. Consumables such as ESI emitters and solvent filters are not included in the base delivery and must be ordered separately. Refer to the manual for the specific maintenance schedule and part numbers.

Dimensional Drawings & Technical Documentation

Technical documentation