Waters Waters Positive Pressure-96 Processor
Waters Waters Positive Pressure-96 Processor — Laboratory automation & equipment.
The Waters Positive Pressure-96 Processor is a 96-well polypropylene plate with square wells and pyramid bottoms, holding 2 mL per well, supplied in packs of 50. It is a consumable plate format for sample preparation, not an instrument, and is distinguished within its format by the square-well/pyramid-bottom geometry. Its primary purpose is to hold samples during positive-pressure processing in 96-well workflows.
Full specifications
| Number of Wells mfr | 96 |
| Format mfr | 96-Well Plate |
| Well Shape mfr | Square |
| Bottom Shape mfr | Pyramid |
| Volume mfr | 2 mL |
| Units per Package mfr | 50 pk |
| Application mfr | Sample Preparation |
| Product Type mfr | Plates |
| UNSPSC mfr | 41113036 |
| Recommended inlet gas pressure mfr | 60 to 100 psi (optimal 80 psi) |
| Max Flow pressure range mfr | 0 to 100 psi |
| Material mfr | Polypropylene |
Description
Construction and format
- 96-well polypropylene plate with square wells and pyramid-shaped bottoms; nominal well volume 2 mL. - Supplied as 50 plates per package; UNSPSC 41113036. - This is a consumable plate, not a powered instrument; no electrical, control, or media specifications are provided. ### Behavior and positioning
- The pyramid bottom concentrates residual liquid at a single low point per well, which supports recovery of small remaining volumes after processing. ### Installation and operation
- No PDF digests, certificates, or application notes were supplied; installation, connection, and control specifics cannot be described beyond the plate format itself.
Integration & Operating Notes
Each well is rated at 2 mL; overfilling risks cross-contamination between adjacent wells and loss of sample during positive-pressure processing. Working volume should be set below the nominal figure to leave headroom for the processing step.
The plate is a consumable that relies on the processor to apply uniform positive pressure across all 96 wells. A plate that is not fully seated or is warped will produce uneven flow between wells, so seating should be checked before each run.
Polypropylene plates are intended for one sample-preparation cycle; reuse risks carryover between samples. Ordering is in packs of 50, so consumption should be planned against run count rather than reused.
Selection & Integration Q&A
The processor must accept a standard 96-well plate footprint and apply uniform positive pressure across all 96 wells. No electrical, pressure, or control specifications for the processor are given in the supplied facts, so confirm compatibility with the processor vendor.
The plate must seat flat in the processor so pressure is even across wells, and each well should be filled below the 2 mL nominal volume. No temperature, pressure, or cycle-count limits are provided in the supplied facts.
Base delivery is 50 polypropylene 96-well plates per package. No processor, seals, mats, adapters, or other accessories are listed as included, so any such items must be sourced separately.