Waters Xevo TQ Absolute XR Triple Quadrupole Mass Spectrometer
Waters ·Made in USA · In Active Production

Waters Xevo TQ Absolute XR Triple Quadrupole Mass Spectrometer

Waters Xevo TQ Absolute XR Triple Quadrupole Mass Spectrometer — Mass spectrometers.

The Xevo TQ Absolute XR is a triple quadrupole mass spectrometer with two high-resolution quadrupole analyzers and a T-Wave collision cell, covering 2–2048 m/z. It distinguishes itself within the series by its StepWave XR ion transfer optics and XDR detector, enabling 500 MRM/sec. It serves as the primary quantitative detector in LC-MS/MS workflows for targeted analysis.

Direct drop-in replacements

Shimadzu
Maldimini 1
94%
match
⚖️ Compare
Shimadzu
Nexera Mikros
52%
match
⚖️ Compare
Shimadzu
MALDI 8020
33%
match
⚖️ Compare
Shimadzu
Axima Assurance
0%
match
⚖️ Compare

Full specifications

Core Performance & Functional Specifications
Detector types Low-noise, off-axis, long-life photomultiplier XDR Detector
Ion source High performance ZSpray dual-orthogonal API sources: Multi-mode ESI/APCI/ESCi (standard); UniSpray (optional); APCI probe (optional); nanoFlow ESI (optional); ASAP (optional); APGC (optional); ionKey (optional); DESI XS (optional)
Collision cell mfr T-Wave enabled; software programmable gas contro
Vacuum system mfr One splitflow turbomolecular pump; one vacuum ba
Regulatory approvals/marks mfr CE, CB, NRTL (CAN/US), RCM
MRM speed mfr 500 MRM/sec
Ion source transfer optics mfr StepWave XR
Acquisition modes mfr Full scan MS; Product ion scan; Precursor ion sc
Software mfr waters_connect and MassLynx version 4.2 or later
Dimensions, Weight & Mechanical Design
Mass range 2 to 2048 m/z
Height 60 cm
Length 93 cm
Width 35.6 cm
Mass analyzer mfr Two high-resolution, high-stability quadrupole a

Description

Construction and architecture

Integration & Operating Notes

Electrical
Verify supply capacity for turbomolecular and backing pumps

The vacuum system uses one splitflow turbomolecular pump and one backing pump. These pumps have high inrush currents; the electrical supply must be sized accordingly and may require a dedicated circuit. Refer to the site preparation guide for voltage and current ratings.

Site Preparation Guide (not provided
Control & I/O
Software version must be compatible with instrument firmware

The system requires waters_connect or MassLynx version 4.2 or later. Using older software may prevent communication with the instrument or limit access to acquisition modes such as RADAR. Confirm software compatibility before installation.

Factory Specification Sheet

Selection & Integration Q&A

When should I choose the Xevo TQ Absolute XR over other triple quadrupole models in the Waters series?

Choose the XR when you need the highest MRM speed (500 MRM/sec) and the StepWave XR ion transfer optics for demanding high-throughput quantitation. For lower throughput or budget constraints, consider standard models without XR enhancements.

What are the requirements for connecting the Xevo TQ Absolute XR to an LC system and controlling it?

The system requires an LC system with compatible fittings and a PC running waters_connect or MassLynx v4.2+. Ensure the LC can communicate via the supported interface (e.g., Ethernet) and that the software is configured for the specific ion source in use.

What are the environmental and duty-cycle limits for operating the Xevo TQ Absolute XR?

The instrument is approved for indoor laboratory use (CE, CB, NRTL, RCM). Avoid high ambient temperatures and humidity; ensure adequate ventilation. Continuous operation at high MRM rates may require additional cooling; refer to the site prep guide for specifics.

Dimensional Drawings & Technical Documentation

Technical documentation