Waters Xevo TQ-S cronos
Waters ·Made in USA · In Active Production

Waters Xevo TQ-S cronos

Waters Xevo TQ-S cronos — Mass spectrometers.

The Xevo TQ-S cronos is a tandem quadrupole mass spectrometer with two high-resolution quadrupole analyzers and a T-Wave collision cell, covering 2–2048 m/z. Its standard tool-free ESI/APCI/ESCi multi-mode source distinguishes it from single-source variants, while optional UniSpray and ASAP sources extend ionization flexibility. It serves targeted MRM quantitation and simultaneous full-scan/MRM (RADAR) in analytical laboratories.

Direct drop-in replacements

Shimadzu
Nexera Mikros
86%
match
⚖️ Compare
Shimadzu
Maldimini 1
71%
match
⚖️ Compare
Shimadzu
MALDI 8020
5%
match
⚖️ Compare
Shimadzu
Axima Assurance
0%
match
⚖️ Compare

Full specifications

Core Performance & Functional Specifications
Detector types Low-noise, off-axis, long-life photomultiplier
Ion source High performance ZSpray dual-orthogonal API sources: Multi-mode source – tool free ESI/APCI/ESCi (standard); UniSpray ion source (optional); Tool-free APCI probe (optional); ASAP (optional)
Collision cell mfr T-Wave enabled
Vacuum system mfr One split-flow air-cooled vacuum turbomolecular
Regulatory approvals/marks mfr CE, CB, NRTL (CAN/US), RCM
MRM speed mfr 555 MRM/sec
Acquisition modes mfr Full scan MS; Product ion scan; Precursor ion sc
Dimensions, Weight & Mechanical Design
Mass range 2 to 2048 m/z
Height 60.0 cm
Width 35.6 cm
Depth mfr 93 cm (36.6 in)
Mass analyzer mfr Two high-resolution, high-stability quadrupole a

Description

Construction and series positioning

Integration & Operating Notes

Mounting
Bench must accommodate 93 cm depth and vacuum pump clearances

The instrument is 60.0 cm high, 35.6 cm wide, and 93 cm deep, and the split-flow turbomolecular pump is air-cooled. The bench must provide the full footprint plus unobstructed air intake/exhaust space around the pump; enclosing the rear or sides will degrade vacuum performance and can trigger pump faults.

Factory Specification Sheet
Process Limits
Source choice fixes the ionization chemistry available per run

The standard multi-mode source supports ESI, APCI, and ESCI tool-free, but UniSpray and ASAP are optional and must be ordered separately. Method development must therefore be constrained to the installed source; switching to UniSpray or ASAP chemistry requires the corresponding optional hardware, not just a method change.

Factory Specification Sheet

Selection & Integration Q&A

When should I choose the Xevo TQ-S cronos over other tandem quadrupole variants in the series?

Choose this model when you need 2–2048 m/z coverage, 555 MRM/sec, and RADAR simultaneous full-scan/MRM with the standard tool-free ESI/APCI/ESCi source. If your workflow requires UniSpray or ASAP ionization, confirm those options are ordered, since they are not standard.

What adjacent system requirements must be verified before installing this instrument?

The available specification sheet lists no controller, software, or electrical interface details. Confirm bench space for the 60.0 × 35.6 × 93 cm envelope, air-cooling clearance for the turbomolecular pump, and the backing-pump location; obtain electrical and control requirements from the operating manual before site preparation.

Dimensional Drawings & Technical Documentation

Technical documentation

PDF
Waters connect Xevo TQ S cronos Instrument Driver 1.0.0 Certificate of Structural Integrit
Manual ·264,2 КБ
View PDF