Induztr
Engineering Digest Document Viewer Related Models

Operating Instructions — (BA 892-PT, EN)

Technical Reference Summary

Covered Models & Document Scope

Covers the C-VLU 301 contact-free claw vacuum pump series, including the standard model and the 'XD' variant with protective coating; the 'CD' option has a different design. Document BA 892-PT(BR), edition 1.1, 18.02.2025.

Section-by-Section Technical Breakdown

pp. 14-16
Product Overview and Function

Describes the C-VLU 301 contact-free claw vacuum pump, its main components, data plate layout, and functional principle. The pump uses synchronised gear wheels and bearings lubricated with oil inside a gearbox, with special seals separating the compression chamber. Drive is via a coupling from a standard three-phase motor.

  • Main connections: A vacuum connection, B exhaust air connection, B1 blow-off silencer on pressure side, B2 condensate purge (XD model only), D suction flange with check valve, E cooling air inlet, F cooling air outlet, H oil fill point, K oil drain with magnet, M oil recommendation plate, N data plate, P drive motor, P1 motor data plate, Q hot surfaces >70 °C, S filter silencer.
  • Data plate includes type/size, serial number, year of construction, Data Matrix code, article number, speed 50/60 Hz, motor power 50/60 Hz, suction capacity 50/60 Hz, ultimate pressure (abs.) 50/60 Hz.
  • Example data plate values: S1 100% 7.50 / 9.00 kW, 2935 / 3530 rpm.
  • Model 'XD' has a protective coating; option 'CD' has a different design.
pp. 17-20
Installation

Covers preparation for installation, mechanical installation, pipe connections, lubricating oil check, electrical connection, pressure monitoring connection, and flushing device connection. Requires at least 50 cm clearance around the machine for maintenance.

  • Provide at least 50 cm space around the machine for maintenance work.
  • Incorrect assembly and installation can damage the machine.
  • Hot exhaust gases can cause burns.
  • No pressure monitoring is installed at the factory; it must be connected separately.
  • Flushing device connections include connection flange, flush valve V-1.2, filter, and trigger valve V-1.3.
pp. 22-24
Commissioning and Decommissioning

Describes commissioning checks, rotation direction verification, operation including condensate draining, decommissioning, storage, and recommissioning.

  • Check installation before commissioning.
  • Verify direction of rotation.
  • Drain condensate during operation.
  • Deactivate and store the machine when taking out of service.
pp. 25-32
Maintenance and Repair

Covers maintenance table, preparatory maintenance work, cleaning the vacuum pump, lubricating oil level check and oil change, air filter maintenance (mesh filter, silencer filter, suction filter accessory), motor and coupling maintenance, repair/service, and spare parts.

  • Maintenance table provides intervals and tasks.
  • Check and top up oil level; change oil.
  • Clean or replace mesh filter, silencer filter, and optional suction filter.
  • Motor and coupling require inspection.
  • Spare parts available per document E 892.
pp. 36
Technical Data

Provides technical specifications for the C-VLU 301 vacuum pump.

  • Technical data are given in section 10.
  • Refer to data sheet D 892 for detailed technical data and characteristics.

Key Integration, Operating & Safety Requirements

Specification / Condition Engineering Implication Applies To
Maintenance clearance: at least 50 cm around the machine. p.17 ↗ Ensure sufficient space for maintenance and disassembly/assembly. C-VLU 301
Motor power 50 Hz / 60 Hz: 7.50 / 9.00 kW. p.15 ↗ Select motor protection and power supply accordingly. C-VLU 301
Speed 50 Hz / 60 Hz: 2935 / 3530 rpm. p.15 ↗ Verify pulley or direct drive compatibility and coupling rating. C-VLU 301
No pressure monitoring is installed at the factory. p.20 ↗ Pressure monitoring must be connected separately to protect motor and pump from overheating. C-VLU 301
Hot surfaces >70 °C are marked on the pump. p.14 ↗ Provide guarding or warning and avoid contact during operation. C-VLU 301
Oil drain point K has a magnet. p.14 ↗ Use magnet to check for metallic wear particles during oil change. C-VLU 301
Condensate purge B2 is only on model 'XD'. p.14 ↗ For high condensate applications, select XD model or provide alternative drainage. C-VLU 301 XD
Flushing device includes flush valve V-1.2 and trigger valve V-1.3. p.20 ↗ Install flushing device per section 5.7 to clean the pump. C-VLU 301
Incorrect power supply can cause material damage. p.19 ↗ Verify voltage and frequency match motor data plate before connection. C-VLU 301
Incorrect flushing process can cause material damage. p.20 ↗ Follow flushing procedure exactly as described. C-VLU 301
Incorrect storage can cause material damage. p.13 ↗ Observe environmental conditions during storage per section 3.2.1. C-VLU 301
Incorrect operation can cause personal injury. p.12 ↗ Operate only by trained personnel following manual. C-VLU 301