No photo available yet
Agilent Technologies 4200 FlexScan
Agilent Technologies 4200 FlexScan — Molecular spectroscopy.
The 4200 FlexScan is a handheld FTIR spectrometer whose optical head (3 lb) is separated from the battery/electronics pack (4 lb) by a cable, enabling access to samples where a single-body analyzer cannot reach. It is calibrated for IR absorbance from 0.05 to 1 absorbance units using 0.06 mil calibration thicknesses, with a primary band at 1610 cm⁻¹ and alternatives at 1510 and 1285 cm⁻¹. It serves field and onsite molecular spectroscopy, including art conservation and diffuse-reflectance geolibrary work.
Agilent Technologies FTIR Compact Portable Systems Series — Model Comparison & Selection
| Model | Wavelength range | Weight, kg | Analysis time, min | Dimensions, mm | Power supply | Protection rating |
|---|---|---|---|---|---|---|
| 4200 FlexScan Current | 4000...650 | — | — | — | — | — |
| 4500 Portable FTIR Spectrometer, Rugged Non-Lab Analyzer | — | 3.6 | less than two minutes | 203 | battery or mains | 54 |
| Compact FTIR Spectrometer, At-side FTIR Analyzer | — | 3.6 | less than two minutes | 203 | battery or mains | 54 |
| Handheld FTIR, Mobile Nondestructive Testing | — | 2.27 | — | — | — | — |
Full specifications
| Wavelength range | 4000...650 |
| Laser | Low-powered solid state |
| Spectral resolution | 4 dimensionless |
| Calibration band center mfr | 1610 |
| Absorbance of thinnest sample mfr | 0.07 units |
| Absorbance of thickest sample mfr | 0.7 units |
| Linear range of IR absorbance mfr | 0.05...1 units |
| Alternative stronger band mfr | 1510 |
| Alternative weaker band mfr | 1285 |
| Calibration thicknesses mfr | 0.06 mils |
| Interferometer geometry mfr | High-throughput Michelson interferometer with fi |
| Source mfr | Wire-wound element element |
| Detector mfr | 1.3 dTGS |
| Optical compartment dimensions mfr | 5.5 in |
| Electrical compartment dimensions mfr | 7.5 in |
| Handheld PC processor mfr | 520 |
| Handheld PC memory mfr | 64 RAM |
| Handheld PC hard drive mfr | 128 flash |
| Stability specification @ 3000 cm-1 mfr | 2 |
| Stability specification @ 1000 cm-1 mfr | 1 |
| non-contact standoff distance mfr | 5 mm |
| protein band region mfr | -1...1700 |
| number of co-added scans mfr | 128 scans |
| collection and processing time mfr | 1 minute |
| ATR mfr | 2500 |
| External reflectance mfr | 1500 |
| Grazing angle mfr | 1500 |
| System OFF mfr | Red Red |
| System startup mfr | Red / green green |
| System ON mfr | Green Green |
| Firmware update mfr | Red / green green |
| ATR diamond diameter mfr | 2 mm |
| ATR active area mfr | 200 μm |
| Sample press force mfr | 15 force |
| Optical head weight mfr | 3 pound |
| Optical compartment weight mfr | 3.2 lb |
| Electrical compartment weight mfr | 2.5 lb |
| Cord length mfr | 6.5 coiled |
| Cord weight mfr | 2.1 lb |
| ATR depth of penetration mfr | 2 micron |
| Battery and electronics pack weight mfr | 4 pound |
| Battery mfr | 10.8 mAh |
| Laser frequency calibration specification mfr | 1 |
| Low battery mfr | Green Green |
| Critically low battery mfr | Red Red |
| Dead battery mfr | No LED illumination illumination |
| Battery run time mfr | 4 hours |
| Battery run time per battery mfr | 4 hours |
| Sample interface mfr | External reflectance , grazing angle , diffuse r |
| Storage temperature | 30...60 °F |
| Humidity mfr | 90 condensing |
| Signal-to-noise specification @ 2500 cm-1 mfr | 1500 |
| Signal-to-noise specification @ 1000 cm-1 mfr | 2800 |
| Operating humidity mfr | 95 |
| Standard beamsplitter mfr | Zinc selenide selenide |
Description
Construction and series positioning
- The 4200 FlexScan splits the instrument into a 3 lb optical head and a 4 lb battery/electronics pack connected by a cable; this is the defining difference from the single-body 4100 ExoScan and the 4300 Handheld FTIR.
- The separation allows the optical head to be positioned on samples where the full analyzer body would obstruct access, while the heavier electronics pack remains supported elsewhere.
- No sibling models or ordering codes are listed in the verified facts; the series context is limited to the 4100 ExoScan and 4300 Handheld FTIR mentioned in the application notes.
Optical behavior and calibration
- The calibration band center is 1610 cm⁻¹, with an alternative stronger band at 1510 cm⁻¹ and a weaker band at 1285 cm⁻¹.
- The stated linear range of IR absorbance is 0.05 to 1; the thinnest sample in the calibration set has absorbance 0.07 and the thickest 0.7.
- Calibration thicknesses are given as 0.06 mils; the trailing comma in the source value is retained as-is and no second thickness is asserted.
- No digitized curve points are available, so spectral response beyond the listed bands and absorbance range is not characterized here.
Installation, connection and operation
- The document digests provide no sections or actionable engineering facts on installation, cabling, control interfaces or operating modes; those specifics cannot be stated from the verified material.
- The application notes cover diffuse reflectance sampling with a geolibrary and epoxy primer thickness measurement on aluminum, indicating field use with a sampling interface rather than a fixed laboratory bench configuration.
Integration & Operating Notes
The calibration is stated for IR absorbance from 0.05 to 1, with the thinnest calibration sample at 0.07 and the thickest at 0.7. Samples outside this range fall beyond the characterized linear region, so thickness or path length must be adjusted before quantitative use.
The optical head weighs 3 lb and the battery/electronics pack 4 lb, joined by a cable. The head must be supported or positioned independently of the pack, so the mounting or handling arrangement has to account for two separate masses rather than one balanced body.
Because the optics and electronics are separated by a cable, the reachable sample area is bounded by that link. The verified documents give no cable length, connector type or control interface, so these must be confirmed against the instrument manual before integration.
The attached application notes contain no maintenance schedule, error codes or consumable lists. Calibration references at 1610, 1510 and 1285 cm⁻¹ and the 0.06 mil calibration thicknesses are the only reference standards given; service planning must rely on the instrument manual, not these notes.
Selection & Integration Q&A
Pick the 4200 when the sample is hard to reach with a single-body analyzer: its 3 lb optical head is separated from the 4 lb electronics pack by a cable. The 4100 ExoScan and 4300 are described as handheld units without that split, so they suit direct-access measurements.
The 4200 FlexScan is documented with a diffuse reflectance sampling interface and the diffuse reflectance geolibrary. Plan for that interface as an adjacent part; the verified notes do not list it as included in base delivery, so confirm the configuration with the supplier.
Quantitative use is bounded by the 0.05–1 IR absorbance linear range, with calibration samples from 0.07 (thinnest) to 0.7 (thickest) absorbance at 0.06 mil calibration thicknesses. Samples outside that window need thickness or path-length adjustment before measurement.
The verified material lists calibration band centers at 1610, 1510 and 1285 cm⁻¹ and 0.06 mil calibration thicknesses, but no maintenance schedule, cables, accessories or consumables are documented as included. Those items and any service intervals must be confirmed from the instrument manual or supplier.
Dimensional Drawings & Technical Documentation
Dimensional drawings
Click drawing to inspect vector dimensions