Agilent Technologies Ultra-high-throughput fragment analysis 5400 Fragment Analyzer
Agilent Technologies ·Made in USA · In Active Production

Agilent Technologies Ultra-high-throughput fragment analysis 5400 Fragment Analyzer

Agilent Technologies Ultra-high-throughput fragment analysis 5400 Fragment Analyzer — Automated electrophoresis.

The Agilent 5400 Fragment Analyzer is a parallel capillary electrophoresis system built on the 5300 platform, configured for robotic integration and nine-plate capacity. It analyzes 96 samples simultaneously across a 2–6,000 nt sizing range with 3 bp separation resolution, distinguishing it from the three-plate 5200/5300 siblings. It serves high-throughput IVT mRNA and LNP-encapsulated drug substance/product quality control.

Agilent Technologies Fragment Analyzer Systems Series — Model Comparison & Selection

Model Measurement rangePlate capacityAverage sizing of 2 200 nt ivt mrna, ntLower marker size of hs rna kit, ntMaximum ivt mrna sample size analyzed, ntSample volume per well, microliter
Ultra-high-throughput fragment analysis 5400 Fragment Analyzer Current 0.5nine plates2370156000—
5200 Fragment Analyzer ——23701560002
5300 Fragment Analyzer ——2370156000—
Fragment Analyzer Capillary Arrays —12———2
RNA QC, DNA QC, Fragment Analyzer —12———2

Full specifications

Core Performance & Functional Specifications
Measurement range 0.5 ng/µL
Average Sizing Of 2,200 Nt Ivt Mrna 2370 nt
Lower Marker Size Of Hs Rna Kit 15 nt
Maximum Ivt Mrna Sample Size Analyzed 6000 nt
Plate capacity nine plates
Separation resolution mfr 3 bp
Dynamic range mfr imately two orders of magnitude magnitude
Sizing range mfr 35 bp
Sizing accuracy mfr 5
Sizing precision mfr 2
Sizing resolution mfr 100
Simultaneous sample analysis mfr 96 samples
Sample types analyzed mfr IVT mRNA drug substances and LNP-encapsulated IV
Additional sample mfr 1
Instrument mfr 5300 system
LNP disruption mfr varying amounts of surfactant surfactant
Surfactant levels tested mfr 20
Sample concentration range mfr 1 ng/μL
Extended method mfr Method BE BE
Dilution ratios tested mfr 1
IVT mRNA drug product sizes analyzed mfr 2,200 nt
Surfactant concentrations tested for LNP disruption mfr 20
Sample concentration range assessed mfr 1 ng/μL
Dilution ratios assessed with extended method mfr 1
upper marker size mfr 1500 bp
upper marker size (ZAG 110/915 kits) mfr 5000 bp
initial denaturation time mfr 30 seconds
denaturation time mfr 10 seconds
annealing time mfr 30 seconds
extension time mfr 15...30 kilobase
number of PCR cycles mfr 30 cycles
final extension time mfr 10 minutes
disruption time mfr 20 minutes
sizing accuracy specification mfr 15 % error
sizing precision specification mfr 5 % CV
Dimensions, Weight & Mechanical Design
Weight 38.5 kg
Sample sizes (nucleotide length) mfr 2,200 nt
capillary array effective length (ultrashort) mfr 22 cm
capillary array total length (ultrashort) mfr 47 cm
capillary array effective length (short) mfr 33 cm
capillary array total length (short) mfr 55 cm
capillary array effective length (long) mfr 55 cm
capillary array total length (long) mfr 80 cm
Standards, Safety & General Data
standard sizing upper limit mfr 6000 nt

Description

Construction and series positioning

Analytical behavior

Integration and operation

Integration & Operating Notes

Process Limits
Keep sample sizing within the 2–6,000 nt range

The instrument's sizing range is 2 to 6,000 nt; samples outside this window, such as the 11,000 nt IVT mRNA construct cited in the application note, require a method or kit validated for that size rather than direct extrapolation from the standard range.

Overview 5994-3638EN, Separation Resolution ZAG Fragment Analyzer
Maintenance
Use series-compatible reagent kits and arrays only

The 5400 is built on the 5300 platform and is compatible with the same reagent kits; capillary arrays and kits from the Fragment Analyzer series must be matched to the method, and consumables are not part of the base instrument delivery.

Data Sheet 5994-0415EN, High-Throughput Robotic Integration 5400 Fragment Analyzer System

Selection & Integration Q&A

When should I choose the 5400 instead of the 5200 or 5300 Fragment Analyzer?

Pick the 5400 when robotic integration and nine-plate capacity are required for unattended high-throughput runs. The 5200 and 5300 are lower-capacity siblings; the 5300 is quoted at 5 pg/µL sensitivity and the standard Fragment Analyzer handles three plates, so choose those when plate throughput and robot access are not limiting.

What reagent and consumable compatibility must be confirmed before ordering?

The 5400 is built on the 5300 platform and accepts the same reagent kits, so kits and capillary arrays must be ordered separately and matched to the method, such as the ZAG 135 or ZAG 110 dsDNA kits or the IVT mRNA/LNP method BE reagents; none are included in the base instrument.

What sample preparation limits apply to LNP-encapsulated IVT mRNA on this system?

LNP drug product must be disrupted with surfactant at a validated level and dilution ratio before injection; the application note tests varying surfactant amounts and dilution ratios, and sample sizing must stay within the 2–6,000 nt range or use a validated extended method for larger constructs.

What is not included in the base delivery and what must be scheduled for service?

Reagent kits, capillary arrays, surfactant reagents and robotic integration hardware are not part of the base instrument; the supplied digests do not specify service intervals, so maintenance scheduling and consumable replacement periods must be obtained from the full instrument manual.

Dimensional Drawings & Technical Documentation

Dimensional drawings

performance curve performance curve

Click drawing to inspect vector dimensions

Technical documentation

PDF
Separation Resolution Capabilities of the Agilent ZAG DNA Analyzer
Datasheet ·1,1 МБ ·12 pp.
View PDF
PDF
CQA Assessment of LNP-mRNA Drug Products
Brochure ·381,9 КБ ·7 pp.
View PDF