Agilent Technologies Scroll Pumps IDP Series, Small, Dry & Hermetic Vacuum
Agilent Technologies Scroll Pumps IDP Series, Small, Dry & Hermetic Vacuum — Vacuum technologies with Motor power 0.119 kW, Pumping speed 3.6 m³/h.
The Agilent IDP Series small dry scroll pump is a hermetic, oil-free vacuum generator with a 60 L/min pumping speed and 3.3 mbar base pressure, driven by a 0.16 HP motor. It is the compact member of the IDP family, distinguished from the larger TriScroll line by its smaller footprint. It serves as a clean, hydrocarbon-free backing pump for analytical instruments and laboratory systems.
Agilent Technologies Dry Scroll Pumps Series — Model Comparison & Selection
| Model | Motor power, kW | Pumping speed, m³/h | Base pressure, mbar |
|---|---|---|---|
| Scroll Pumps IDP Series, Small, Dry & Hermetic Vacuum Current | 0.119 | 3.6 | 3.3 |
| Large Dry Scroll Pumps, TriScroll Vacuum Pumps | 0.119 | 3.6 | 3.3 |
Full specifications
| Motor power | 0.16 HP |
| Pumping speed | 60 L/min |
| Base Pressure | 3.3 mbar |
| IDP-10 mfr | 3810 |
| IDP-10 with inlet isolation valve mfr | 3810 |
| IDP-7/10 tip seal replacement kit mfr | 3807 |
| Exhaust silencer kit mfr | 110 |
| Purge kit mfr | 3807 |
| Gas ballast kit mfr | 3807 |
| Inlet trap mfr | 25 |
| Vibration isolation kit mfr | 110 VIBISOKIT |
| IDP-35 mfr | 3835 |
| IDP-35 with Gauge mfr | 3835 |
| IDP-35 with Inlet Valve mfr | 3835 |
| IDP-35 with Inlet Valve and Gauge mfr | 3835 |
| Inlet HEPA filter, NW40 mfr | 40 |
| HEPA filter, NW25 mfr | 25 |
| IDP-45 mfr | 3845 |
| IDP-45 with Gauge mfr | 3845 |
| IDP-45 with Inlet Valve mfr | 3845 |
| IDP-45 with Inlet Valve and Gauge mfr | 3845 |
| IDP-15 mfr | 3815 |
| IDP-15 with inlet isolation valve mfr | 3815 |
| IDP-15 tip seal replacement kit mfr | 3815 |
| IDP-3 mfr | Vibration isolation kit kit |
| IDP-4 mfr | Replacement filter element element |
| IDP-7 mfr | Vibration isolation kit kit |
| inlet valve closing time mfr | 20 milliseconds |
| inlet valve opening time after power restore mfr | 10 seconds |
| tip seal replacement duration mfr | half an hour hour |
| IDP-4 maintenance duration mfr | 15...30 minutes |
| integrated Pirani gauge pressure range mfr | -4...1000 mbar |
| VPI valve isolation time mfr | 20 ms |
| green energy consumption mfr | 4 GWh |
| CO2 avoided mfr | 1350 Tons |
| solar energy generation mfr | 634 MWh |
| CO2 saved mfr | 214 tons |
| airfreight CO2 emission mfr | 600 kilometer |
| water saving mfr | 250 year |
| wastewater reduction mfr | 41 |
| energy reduction mfr | 35 MWh |
| CO2 emission reduction mfr | 12 ton |
| Operating voltage mfr | 100 VAC |
| IDP-35/IDP-45 supply frequency mfr | 50 Hz |
| startup current mfr | 10 A |
| cooling liquid reduction mfr | 20...40 percent |
Description
Construction and series positioning
- The IDP Series small dry scroll pump uses a hermetic scroll mechanism with no oil seal, eliminating backstreaming contamination.
- Within the Agilent dry scroll family, this model is the small-frame variant; the TriScroll pumps are the larger-frame siblings with different pumping capacities and ultimate pressures.
- The IDP family spans IDP-3 through IDP-45, with the IDP-3 offering a 24 VDC drive option and other models available in 100–120 VAC or 200–240 VAC motor variants.
Performance and operating behavior
- Pumping speed is 60 L/min, with a base pressure of 3.3 mbar under the stated measurement conditions.
- The 0.16 HP motor provides the drive power for the scroll mechanism; no load-dependent curves or media-specific performance data are available in the supplied facts.
- The pump is intended for dry, oil-free operation; no process media compatibility limits beyond the absence of oil are documented here.
Installation and control
- Operating voltage is listed as 100 VAC; the family digest notes 50 Hz and 60 Hz operating points and multiple voltage variants, so the exact supply configuration must be confirmed against the motor nameplate.
- No control interface, I/O, or communication protocol details are provided in the available documents.
- The pump is supplied without certificates or application-specific accessories in the verified facts; refer to the IDP family brochure for service options.
Integration & Operating Notes
The IDP family includes 100–120 VAC and 200–240 VAC motor variants as well as a 24 VDC drive on the IDP-3. The verified operating voltage for this model is 100 VAC, but the supply must match the nameplate exactly; applying 200–240 VAC to a 100 VAC motor will damage the drive.
Because the IDP is an oil-free dry scroll pump, routine maintenance centers on the scroll tip seal rather than lubricant replacement. Service intervals and tip-seal replacement procedures are not detailed in the supplied digests; consult the IDP family manual for the specific schedule.
Selection & Integration Q&A
Choose the small IDP when 60 L/min pumping speed and 3.3 mbar base pressure meet the backing requirement and space is limited. TriScroll pumps are the larger-frame siblings with higher capacity for processes needing greater throughput or lower ultimate pressure.
The supplied digests do not list explicit mounting orientation, ambient temperature, or duty-cycle limits for this model. The pump is a compact dry scroll unit intended for continuous oil-free operation; confirm installation details in the IDP family manual before commissioning.
The base pump delivery does not include certificates, application-specific fittings, or spare tip-seal kits according to the verified facts. Service options are described in the Agilent vacuum green solutions brochure; tip-seal replacement is the primary wear-related service.