Agilent Technologies Magnis NGS Prep System
Agilent Technologies ·Made in USA · In Active Production

Agilent Technologies Magnis NGS Prep System

Agilent Technologies Magnis NGS Prep System — Next generation sequencing with Temperature 15 °C.

The Magnis NGS Prep System (G9710A) is a research-use-only automated liquid-handling instrument for next-generation sequencing library preparation from total RNA or fragmented genomic DNA, including blood and FFPE samples. It integrates a 75 °C heater, a shaker, and an LCD touchscreen interface, and is validated exclusively with Agilent Magnis NGS kits. It is the RUO sibling of the IVD-labeled MagnisDx (K1007A).

Temperature
15 °C

Agilent Technologies NGS Automation Platforms Series — Model Comparison & Selection

Model Temperature, °COperating temperature, °CAcoustic pressure, dBElectrostatic discharge immunity, voltsLabware temperature stability, °CLibrary storage duration after run, hours
Magnis NGS Prep System Current 157570800012072
MagnisDx NGS Prep System 157570800012072

Full specifications

Core Performance & Functional Specifications
Temperature 15 °C
Electrostatic Discharge Immunity 8000 volts
Library Storage Duration After Run 72 hours
Lifting capacity 100 kg
Temperature settings 75 °C
Uv Decontamination Extended Cycle Duration 2 hours
Uv Decontamination Quick Cycle Duration 30 minutes
Shaker maximum speed mfr 1800 % rpm
Intended use mfr Automated liquid handling system for NGS library
Validated reagents mfr Agilent Magnis NGS kits kits
Materials provided mfr Instrument with preloaded touchscreen software;
Cleaning supply mfr Dry, lint-free, scratch-free wipes wipes
Status LED - Ready mfr Blue Blue
Status LED - Running mfr Green Green
Status LED - Error mfr Red Red
End result mfr Target-enriched DNA library ready for sequencing
Cleaning supplies mfr Alcohol wipes; dry, lint-free, scratch-free wipe
Dimensions, instrument door closed (H × D × W) mfr 71 cm
Dimensions, instrument door open (H × D × W) mfr 107 cm
Clearance, sides mfr 4 inches
Clearance, back mfr 7 inches
Clearance, front mfr 2 inches
Clearance, top mfr 44 inches
Lifting capacity for moving instrument mfr 220 lbs
Maximum shaker speed mfr 1 % tr/min
Maximum speed (rpm) mfr 1800
ISM Classification mfr 1
Diluted bleach (10%) wipes mfr Surface-cleaning of the instrument deck deck
Alcohol (70%) wipes mfr Surface-cleaning of the instrument exterior and
Dry, lint-free, scratch-free, laboratory wipes mfr Surface-cleaning of the barcode scanner window w
White mfr Ready Ready
Blue mfr Ready Ready
Green mfr Running Running
Red mfr Error Error
Set up and run protocols mfr Yes Yes
Update the number of PCR cycles during run setup mfr No Yes Yes
Edit user accounts of other users mfr No Yes Yes
Install firmware updates mfr No Yes Yes
Delete diagnostic reports mfr No Yes Yes
Bypass reagent expiration error mfr No Yes*
Home icon mfr Provides access to the Home screen. Press to exi
User name mfr Displays the user name of the currently logged-i
Door status mfr Indicates the position and lock status of the in
Error icon mfr Indicates the occurrence of a system error or fa
Time and date mfr Displays the time and date according to the syst
User Management mfr Opens the “User Management screen” for viewing u
System Settings mfr Ouvre la Fenêtre « System Settings » permettant
Export mfr Opens the “Export Files screen” for exporting po
Auto Teaching mfr Ouvre la Fenêtre « Auto Teach » permettant d’exé
Hardware Usage Tracking mfr Ouvre la Fenêtre « Hardware Usage Tracking » per
Date & Time Settings mfr Opens the “Date & Time Settings screen” for sett
Chiller Setting mfr Ouvre la Fenêtre « Chiller Setting » permettant
Other Settings mfr Opens the “Other Settings screen” which has a se
Firmware Update mfr Opens the “Firmware Update screen” for installin
Lift capacity required for moving mfr 100 kg
Side clearance mfr 10 cm
Back clearance mfr 18 cm
Chiller hold time before auto shutoff mfr 2 hours
Clearance side mfr 10 cm
Clearance back mfr 18 cm
Clearance front mfr 5 cm
Clearance top mfr 111 cm
ESD threshold mfr 8 volts
Module du thermocycleur mfr Température maximale du bloc thermique thermique
Module chauffage/agitateur/aimant mfr Vitesse maximale maximale
Module refroidisseur mfr Plage de température rature
Prise d’alimentation mfr Puissance maximale maximale
Connecteurs d’entrée/de sortie (E/S) mfr Tension nominale maximale maximale
Système mfr Poids Poids
Conditions environnementales* mfr Altitude Altitude
Configuration et exécution de protocoles mfr Oui Oui
Affichage des données des protocoles exécutés par eux-mêmes mfr Oui Oui
Mise à jour du nombre de cycles de réaction de polymérisation en chaîne lors de la configuration du protocole mfr Non Oui Oui
Affichage des données des protocoles exécutés par d’autres utilisateurs mfr Non Oui Oui
Modification des comptes d’autres utilisateurs mfr Non Oui Oui
Installation des mises à jour du firmware mfr Non Oui Oui
Installation des mises à jour de protocoles mfr Non Oui Oui
Suppression des rapports de diagnostic mfr Non Oui Oui
Modification de la version par défaut des protocoles mfr Non Oui Oui
Contournement de l’erreur de péremption du réactif mfr Non Oui*
Date & time Settings mfr Ouvre la Fenêtre « Date & Time Settings » permet
Lingettes à l'eau de Javel diluée (10 %) mfr Nettoyage en surface du plateau de l'instrument
Lingettes imbibées d'alcool (70 %) mfr Nettoyage en surface de l'extérieur et du platea
Lingettes de laboratoire douces, non pelucheuses et sèches mfr Nettoyage de surface de la fenêtre du lecteur de
Blanc mfr « Ready »
Bleu mfr « Ready »
Vert mfr « Running »
Rouge mfr « Error »
Icône en forme de maison mfr Permet d’accéder à la fenêtre « Home ». Appuyez
Nom d’utilisateur mfr Affiche le nom de l’utilisateur actuellement con
État de la porte mfr Indique la position et l’état de verrouillage de
UV tube lifetime mfr 630 heures
Post-run chiller hold time mfr 2 heures
Post-run sample hold time mfr 72 heures
Lift capacity required mfr 100 kg
Rear clearance mfr 18 cm
Dimensions, Weight & Mechanical Design
Weight 95 kg
Dimensions, instrument door closed (height × depth × width) mfr 71 cm
Dimensions, instrument door open (height × depth × width) mfr 107 cm
Dimensions, instrument door closed (Height × Depth × Width) mfr 71 cm
Dimensions, instrument door open (Height × Depth × Width) mfr 107 cm
Electrical, Power & Drive Specifications
Power consumption 1000 W
Power supply 100...240 VAC
AC voltage mfr 100...240
AC frequency mfr 50 Hz
ISM classification mfr 1 A
Power supply frequency mfr 50 Hz
Maximum voltage rating mfr 3.3 VDC
Interfaces, Connections & Control
USB 2.0 port maximum voltage rating mfr 5 VDC
Control interface mfr LCD touchscreen touchscreen
USB 2.0 port maximum nominal voltage mfr 5 VCC
LAN port maximum nominal voltage mfr 3.3 VCC
LAN port maximum voltage rating mfr 3.3 VDC
USB port voltage mfr 5 VDC
Ethernet port voltage mfr 3.3 VDC
USB 2.0 port maximum rated voltage mfr 5 VCC
LAN port maximum rated voltage mfr 3.3 VCC
View data from their own protocol runs mfr Yes Yes
View data from protocol runs of other users mfr No Yes Yes
Install protocol updates mfr No Yes Yes
Change default protocol version mfr No Yes Yes
Protocol Update mfr Ouvre la Fenêtre « Protocol Update » permettant
Electrostatic discharge threshold affecting USB mfr 8000 volts
Install firmware and protocol updates mfr No Yes Yes
Materials, Media & Process Compatibility
Starting material mfr Total RNA or fragmented genomic DNA purified fro
Operating Conditions, Environment & Protection
Acoustic Pressure 70 dBA
Labware Temperature Stability 120 °C
Library Storage Temperature After Run 12 °C
Maximum Altitude 2000 m
Maximum temperature 75 °C
Minimum Temperature Of Thermal Block 4 °C
Sound pressure 70 dBA
Operating humidity mfr 30...70 condensing
Humidity mfr 30 condensing
Maximum altitude for instrument operation mfr 2000 m

Description

Construction and series positioning

Thermal and motion behavior

Interfaces and electrical environment

Operation and maintenance

Integration & Operating Notes

Process Limits
Do not exceed 75 °C heater setpoint

The heater maximum is 75 °C (167 °F). Any protocol requiring higher incubation temperatures cannot be run on this instrument; verify kit protocols against this ceiling before committing a workflow, since exceeding it is outside the documented operating envelope.

Factory Specification Sheet
Process Limits
Validated only with Agilent Magnis NGS kits

The instrument is validated for Agilent Magnis NGS kits with total RNA or fragmented genomic DNA from cell/tissue, blood, or FFPE samples. Third-party library prep chemistries are not covered by the documented validation and would require independent verification.

Factory Specification Sheet
Electrical
USB and LAN ports are logic-level interfaces

The USB 2.0 port is rated 5 V nominal and the LAN port 3.3 V nominal; these are interface voltage ratings, not instrument supply requirements. Supply voltage and current are not stated in the verified facts, so confirm them from the instrument label before site power planning.

Factory Specification Sheet
Maintenance
Clean only with dry, lint-free, scratch-free wipes

The documented cleaning supply is dry, lint-free, scratch-free wipes. No liquid cleaning agents, service intervals, or error-code procedures are specified in the supplied documentation; the red Error LED indicates a fault state but no code table is available.

User Guide, GEN MAN K1007 90000

Selection & Integration Q&A

When should I choose the Magnis (G9710A) rather than the MagnisDx (K1007A)?

Choose G9710A for research-use-only workflows; it is labeled not for diagnostic procedures. Select K1007A only when in vitro diagnostic use is required. Both share the same platform and Agilent Magnis NGS kit chemistry, so the decision is regulatory, not technical.

What external connections and accessories does the instrument need to be integrated into a lab network?

It provides a USB 2.0 port (5 V nominal) and a LAN port (3.3 V nominal) plus an LCD touchscreen for local control. Only a power cord is included; USB cables, network cables, and any external PC are not part of the base delivery and must be sourced separately.

What maintenance and consumables are required, and what is not included?

Cleaning requires dry, lint-free, scratch-free wipes. The base delivery includes the instrument with preloaded software, power cord, and functional test certificate; Agilent Magnis NGS kits, wipes, and any USB/LAN cables are not included. No service interval is specified in the supplied documentation.

Dimensional Drawings & Technical Documentation

Technical documentation

PDF
Magnis and MagnisDx NGS Prep System User Guide
Manual ·3,1 МБ ·96 pp.
View PDF
PDF
Magnis/MagnisDx NGS Prep System Quick Reference Guide
Manual ·497,6 КБ ·17 pp.
View PDF
PDF
Magnis and MagnisDx NGS Prep System User Guide
Manual ·4,2 МБ ·100 pp.
View PDF