Nabertherm QS 70
Nabertherm QS 70 — Salt Bath Furnaces.
The QS 70 is an electrically heated martempering salt bath furnace with a 440 × 320 × 680 mm charging basket workspace and a minimum salt fill of 70 kg. It operates up to 550 °C on a 3-phase supply and accepts work charges up to 10 kg. It is positioned as the larger unit in the QS series relative to the QS 20 and QS 30 siblings, for neutral-salt heat treatment of small to medium batches.
Nabertherm QS Series — Model Comparison & Selection
Full specifications
| Electrical connection | 3-phase |
| min. amount of salt mfr | 70 |
| Heating mfr | 8,0 |
| Outer dimensions (W × D × H) mfr | 1000 × 700 × 1020 mm |
| Weight | 260 kg |
| max. charge weight mfr | 10 |
| Work space dimensions in the charging basketin mm mfr | 440 |
| Work space dimensions in the charging basketin mm mfr | 320 |
| Work space dimensions in the charging basketin mm mfr | 680 |
| Max temperature | 550 °C |
Description
Construction and series positioning
- The QS 70 is a top-loading salt bath furnace with a charging basket workspace of 440 × 320 × 680 mm (W × D × H).
- Outer dimensions are 1000 × 700 × 1020 mm; the unit weighs 260 kg.
- Within the QS series, the QS 70 is the larger modification relative to the QS 20 and QS 30, offering a 70 kg minimum salt inventory and a 10 kg maximum charge weight.
- Heating is electric, with a 3-phase connection; the heating power value is listed as 8.0 in the factory data.
Process behavior
- The maximum operating temperature is 550 °C, consistent with neutral-salt martempering service.
- No digitized curve points are available for this model, so no cooling-rate or uniformity behavior is asserted here.
- The salt inventory must be at least 70 kg to fill the bath; the charge weight must not exceed 10 kg.
Control and operation
- The attached controller documentation covers the Nabertherm 500 series and MyNabertherm app, including process data storage and AMS2750F instrumentation types, but does not print model-specific wiring or settings for the QS 70.
- No furnace-specific manual digest is available; installation and connection details beyond the 3-phase supply and outer dimensions are not documented in the supplied facts.
Integration & Operating Notes
The QS 70 is specified for a 3-phase electrical connection. The available facts do not state voltage, current, or frequency, so the site supply must be confirmed against the nameplate before installation; no single-phase configuration is documented for this model.
The maximum charge weight is 10 kg. Exceeding it risks salt displacement, uneven treatment, and mechanical stress on the charging basket; the basket workspace of 440 × 320 × 680 mm should be loaded within this weight limit regardless of volume.
The minimum salt amount is 70 kg. Operating below this inventory compromises temperature stability and immersion coverage of the charge; the salt level must be maintained at or above this fill for martempering service up to 550 °C.
The controller digest covers the 500 series and MyNabertherm app, including process data storage and AMS2750F instrumentation types, but contains no QS 70-specific settings. Controller selection and configuration must be confirmed against the furnace order documentation.
Selection & Integration Q&A
Choose the QS 70 when the charge fits within 10 kg and the 440 × 320 × 680 mm basket workspace, and when a 70 kg minimum salt inventory is acceptable. The QS 20 and QS 30 are smaller siblings; the supplied facts do not list their capacities, so confirm their workspace and charge limits before downsizing.
The furnace requires a 3-phase connection; voltage, current, and frequency are not stated in the supplied facts and must be read from the nameplate. Controller options are covered in the separate 500-series/MyNabertherm documentation, which does not include QS 70-specific wiring, so the control cabinet and sensor configuration must be confirmed with the order documents.
The supplied facts contain no maintenance schedule, service intervals, or list of included accessories. Neutral salt for the minimum 70 kg bath fill and any charging basket handling equipment are not documented as part of base delivery; these must be confirmed against the order and the furnace manual, which is not included in the supplied digests.