Nabertherm QS 20
Nabertherm QS 20 — Salt Bath Furnaces.
The QS 20 is a 1-phase electrically heated salt bath furnace for martempering in neutral salts, with a maximum temperature of 550 °C. Its charging basket provides a work space of 300 × 230 × 460 mm and accepts a maximum charge weight of 3 kg, with a minimum salt amount of 20. It is positioned as the smallest model in the QS series, below the QS 30 and QS 70, for low-throughput martempering of small batches.
Nabertherm QS Series — Model Comparison & Selection
Full specifications
| Electrical connection | 1-phase |
| min. amount of salt mfr | 20 |
| Heating mfr | 2,6 |
| Outer dimensions (W × D × H) mfr | 800 × 600 × 1020 mm |
| Weight | 150 kg |
| max. charge weight mfr | 3 |
| Work space dimensions in the charging basketin mm mfr | 300 |
| Work space dimensions in the charging basketin mm mfr | 230 |
| Work space dimensions in the charging basketin mm mfr | 460 |
| Max temperature | 550 °C |
Description
Construction and series positioning
- The QS 20 is the entry model in the QS series of martempering furnaces using neutral salts; sibling models QS 30 and QS 70 offer larger work spaces and charge capacities.
- The furnace is electrically heated with a 2.6 kW heating capacity and connects to a 1-phase supply.
- The work space inside the charging basket measures 300 × 230 × 460 mm (W × D × H), and the outer dimensions are 800 × 600 × 1020 mm.
- The unit weighs 150 kg.
Process behavior and limits
- Maximum operating temperature is 550 °C, suitable for martempering in neutral salt baths.
- The minimum salt amount is 20 (unit not specified in the source), and the maximum charge weight is 3 kg; exceeding the charge weight risks inadequate heat transfer and temperature non-uniformity.
- No digitized curve points are available for this model, so heating or cooling rates cannot be stated.
Control and operation
- The attached document digests do not contain model-specific control or installation details for the QS 20; the controller document covers Nabertherm series 500 controllers and the MyNabertherm app in general terms only.
- No certificates or applications are listed for this model in the verified facts.
Integration & Operating Notes
The furnace is a 1-phase unit with 2.6 kW heating capacity; verify that the available supply circuit and protective device can carry this load continuously. No voltage or current rating is given in the verified facts, so the exact supply voltage must be confirmed against the nameplate before installation.
The maximum charge weight is 3 kg. Overloading the basket reduces salt circulation around the parts and can cause non-uniform temperature and inadequate martempering results; the minimum salt amount of 20 must also be observed to maintain the bath.
The maximum temperature is 550 °C. Operating above this limit risks degradation of the neutral salt and damage to the furnace; the controller setpoint and over-temperature protection should be configured so that the bath cannot exceed this value.
Selection & Integration Q&A
Choose the QS 20 for small batches within its 3 kg maximum charge weight and 300 × 230 × 460 mm basket work space. The QS 30 and QS 70 are larger siblings; select them when higher charge weights or larger work spaces are required.
It is a 1-phase furnace with 2.6 kW heating capacity; the supply circuit must be sized accordingly. The verified facts do not state the supply voltage or a specific controller, so confirm the nameplate voltage and consult Nabertherm for a compatible controller.
The maximum charge weight is 3 kg and the minimum salt amount is 20; the bath must not exceed 550 °C. No duty-cycle or ambient-temperature limits are given in the verified facts, so continuous operation assumptions should be confirmed with the manufacturer.
Neutral salt for the bath is a consumable and is not part of the base furnace delivery. The verified facts and attached document digests contain no maintenance schedule or service intervals for the QS 20; request the operating manual from Nabertherm for salt maintenance and inspection intervals.