Nabertherm R 50/500/12
Nabertherm R 50/500/12 — Tube furnaces.
The R 50/500/12 is a single-phase compact tube furnace with a 50 mm outer tube diameter and a 500 mm heated length, rated to 1200 °C. It is the mid-length variant in the R 50 series, positioned between the shorter R 50/250/13 and the larger-bore R 170/1000/13. It serves laboratory and pilot-scale thermal processing of small-diameter workpieces and gas atmospheres.
Nabertherm Compact Tube Furnaces up to 1300 °C | Nabertherm Series — Model Comparison & Selection
| Model | Electrical connection | Max temperature, °C | Weight, kg |
|---|---|---|---|
| R 50/500/12 Current | 1-phase | 1200 | 34 |
| R 170/1000/13 | 3-phase | 1300 | 89 |
| R 50/250/13 | 1-phase | 1300 | 22 |
Full specifications
| Electrical connection | 1-phase |
| Outer tube Ø mfr | 50 |
| Heated mfr | 500 |
| Connected mfr | 3.4 |
| Outer dimensions (W × D × H) mfr | 340 × 508 mm |
| Weight | 34 kg |
| Length constant1 mfr | 170 |
| Length constant1 mfr | 250 |
| Tube length mfr | 700 |
| Max temperature | 1200 °C |
Description
Construction and series positioning
- The R 50/500/12 is built around a 50 mm outer-diameter process tube with a 700 mm overall tube length and a 500 mm heated zone; the constant-temperature zone extends 170 mm and 250 mm along the tube axis.
- Within the R 50 series it sits between the R 50/250/13 (shorter heated length, 1300 °C class) and the R 170/1000/13 (larger 170 mm bore, 1000 mm heated length, 1300 °C class). The R 50/500/12 is the 1200 °C, 500 mm heated-length member of the 50 mm-bore family.
- The furnace is a 1-phase unit drawing 3.4 kW, with outer dimensions of 340 × 508 mm (W × D) and a 34 kg mass.
Thermal behavior and media
- Maximum working temperature is 1200 °C. No digitized heating or cooling curves are supplied for this model, so ramp rates and uniformity figures cannot be stated from the verified data.
- The 50 mm bore and 500 mm heated length define the usable process envelope: workpieces or gas streams must fit within the tube and the 170/250 mm constant-temperature lengths if isothermal treatment is required.
Control and operation
- The attached controller documentation covers the Nabertherm 500-series controllers and the MyNabertherm app, including process-data storage and AMS2750F instrumentation-type temperature-uniformity classification. It does not print model-specific wiring or setpoints for the R 50/500/12.
- No furnace-specific manual digest (installation, connection, error codes) was supplied for this model; operating specifics beyond the electrical and dimensional data above are not verifiable from the provided facts.
Integration & Operating Notes
The furnace is a 1-phase unit with 3.4 kW connected load. The engineer must confirm the available single-phase branch can carry this load continuously and provide a dedicated protective device; no voltage or current rating is printed in the verified data, so the nameplate must be consulted before wiring.
The maximum temperature is 1200 °C. Operation above this limit risks tube and heating-element damage and invalidates any thermal process result. The controller setpoint and over-temperature protection must be configured so the 1200 °C ceiling cannot be exceeded in normal or fault conditions.
With a 700 mm tube length and 340 × 508 mm (W × D) housing, the installation must leave clear space at both tube ends for workpiece loading, gas inlet/outlet fittings and any end plugs. The 34 kg mass requires a bench or frame rated for the furnace plus tube and fittings.
Selection & Integration Q&A
Pick the R 50/500/12 when a 50 mm bore and a 500 mm heated length at 1200 °C are sufficient. Choose the R 50/250/13 for shorter heated zones in the 1300 °C class, or the R 170/1000/13 when a 170 mm bore and 1000 mm heated length are needed.
The unit is single-phase with 3.4 kW connected load. The verified data prints no voltage or current, so the nameplate must be read before specifying the branch circuit, cable size and breaker; size the dedicated circuit for continuous 3.4 kW operation.
The verified data lists no consumables, spare tubes, end plugs, gas fittings or cables as included. The controller digest covers 500-series controllers and the MyNabertherm app as separate items. Tube replacement intervals and service schedule are not printed and must be confirmed with Nabertherm.