No photo available yet

Nabertherm ·Made in Germany · In Active Production

Nabertherm VHT 500/..

Nabertherm VHT 500/.. — Cold Wall Retort Furnaces.

The VHT 500/.. is a cold-wall retort furnace with a 500 l chamber and a 750 × 900 × 750 mm work space, positioned at the upper end of the VHT series above the VHT 100/.. and VHT 40/.. siblings. Its heating power is configuration-dependent (220/260 kW or on request), and it is intended for high-temperature batch processing under controlled atmosphere or vacuum.

Nabertherm VHT Series — Model Comparison & Selection

Model Chamber volume, L
VHT 500/.. Current 500
VHT 100/.. 100
VHT 40/.. 40

Full specifications

Core Performance & Functional Specifications
Chamber volume 500 l
Work space in mm mfr 750
Max. charge mfr 350
Heating power in kW4 mfr on request
Outer dimensions (W × D × H) mfr 32001 × 4500 × 3300 mm
Inner dimensions (W × D × H) mfr 725 × 850 × 725 mm

Description

Construction and series positioning

Thermal and electrical configuration

Control and documentation

Integration & Operating Notes

Mounting
Plan floor area and height for 3200 × 4500 × 3300 mm envelope

The outer dimensions leave little margin for service access, charge loading equipment and cable routing. Verify door swing, crane or hoist approach and maintenance clearance around the full envelope before committing the foundation and building height.

Factory Specification Sheet
Process Limits
Keep charge mass at or below 350 kg

The maximum charge is 350 kg. Exceeding it loads the retort and hearth beyond their design basis; distribute the charge evenly and account for fixture weight, not only the workload, when checking against this limit.

Factory Specification Sheet

Selection & Integration Q&A

When should I choose the VHT 500/.. rather than the VHT 100/.. or VHT 40/..?

Choose the VHT 500/.. when the batch requires a 500 l chamber and a work space of 750 × 900 × 750 mm with charges up to 350 kg. The VHT 100/.. and VHT 40/.. are smaller-chamber siblings; use them when batch volume and charge mass fit their smaller work spaces.

What must be confirmed before specifying the power supply and controller for this furnace?

The heating power is configuration-dependent: the sheet lists 220/260 kW and further ratings as 'on request'. Confirm the ordered rating in writing before sizing transformers, protection and cables. Controller type and instrumentation (e.g. AMS2750F) are selected from the 500-series controller range.

What installation envelope and charge limits must the site accommodate?

The furnace occupies 3200 × 4500 × 3300 mm (W × D × H), so floor area, height clearance and access for loading equipment must be planned around that envelope. The maximum charge is 350 kg, including fixtures. No furnace-specific manual digest was supplied, so confirm clearances and foundation loads with Nabertherm.

What maintenance and accessory information is available for this model?

No furnace-specific maintenance schedule, service intervals or base-delivery accessory list is included in the supplied documents. The controller brochure covers the 500-series controllers and MyNabertherm app but not consumables or cables. Request the VHT 500/.. instruction manual and spare-parts list from Nabertherm before commissioning.

Dimensional Drawings & Technical Documentation

Technical documentation

PDF
Prozesssteuerung englisch
Brochure ·2,8 МБ ·20 pp.
View PDF
PDF
Fiber optics glass english 0
Brochure ·10,3 МБ ·97 pp.
View PDF
PDF
Foundry english
Brochure ·4,2 МБ ·52 pp.
View PDF
PDF
Dental english
Brochure ·13,1 МБ ·72 pp.
View PDF