Nabertherm VHT 40/..
Nabertherm VHT 40/.. — Cold Wall Retort Furnaces.
The VHT 40/.. is a cold-wall retort furnace with a 40-litre chamber and a 300 × 450 × 300 mm work space, built for high-temperature processing under controlled atmosphere or vacuum. Its 30 kg maximum charge and multi-configuration heating power (30 to 125 kW depending on variant) distinguish it from smaller and larger siblings in the VHT series. It serves as the hot zone in laboratory and pilot-scale thermal systems requiring clean, uniform heating.
Nabertherm VHT Series — Model Comparison & Selection
| Model | Chamber volume, L |
|---|---|
| VHT 40/.. Current | 40 |
| VHT 100/.. | 100 |
| VHT 500/.. | 500 |
Full specifications
| Chamber volume | 40 l |
| Work space in mm mfr | 300 |
| Work space in mm mfr | 450 |
| Work space in mm mfr | 300 |
| Max. charge mfr | 30 |
| Heating power in kW4 mfr | 83/103/1252 |
| Heating power in kW4 mfr | 54/903 |
| Heating power in kW4 mfr | 110 |
| Heating power in kW4 mfr | 30 |
| Outer dimensions (W × D × H) mfr | 1600 × 26005 × 2300 mm |
Description
Construction and series positioning
- Cold-wall retort design: the heating elements and insulation are outside the retort, allowing the chamber to be purged or evacuated independently of the furnace shell.
- Chamber volume is 40 l; the usable work space is 300 mm wide × 450 mm deep × 300 mm high.
- Maximum charge is 30 kg, which sets the practical batch size for fixtures and workload.
- Within the VHT series, this is the smallest chamber size; the VHT 100/.. and VHT 500/.. offer larger volumes for scale-up.
Heating power and configuration space
- Heating power is not a single value: the factory data lists 30 kW, 54/90 kW, 83/103/125 kW, and 110 kW across configurations. The exact power depends on the ordered variant (voltage, phase, and retort size).
- Because the model code contains no power rating, the heating power must be selected from the configuration table at order; the 40-litre chamber does not imply a fixed kW value.
- No digitized curve points are available for this model, so heat-up and cooling behaviour cannot be quantified from the supplied facts.
Installation and control
- Outer dimensions are 1600 mm wide × 2600 mm deep × 2300 mm high (the depth figure is printed as 26005 in the source and is treated as a typographical artefact; verify at order).
- The furnace is controlled by Nabertherm series 500 controllers or the MyNabertherm app, as described in the process-control documentation; these support process data storage and temperature uniformity instrumentation per AMS2750F.
- No specific connection voltages, gas fittings, or vacuum pump requirements are stated in the supplied facts; these must be confirmed against the order-specific datasheet.
Integration & Operating Notes
The 30 kg limit applies to the total charge in the work space, including any fixture or basket. Exceeding it risks retort deformation or element damage, and invalidates thermal uniformity assumptions.
Process control documentation covers Nabertherm series 500 controllers and the MyNabertherm app, with process data storage and AMS2750F instrumentation types. The specific controller and recorder must be specified at order; base delivery does not imply a particular control package.
Selection & Integration Q&A
Choose the VHT 40/.. for batches that fit a 300 × 450 × 300 mm work space and weigh no more than 30 kg. The VHT 100/.. and VHT 500/.. offer larger chambers for scale-up; the 40-litre unit is the smallest in the series and suits laboratory or pilot work where the larger volumes are unnecessary.
Heating power is configuration-dependent, listed as 30 kW, 54/90 kW, 83/103/125 kW, or 110 kW. The supply voltage, phase, and current rating must match the ordered variant; the datasheet for the specific configuration is required before the electrical connection is designed.
The process-control documentation describes series 500 controllers and the MyNabertherm app as options; the specific controller, recorder, and AMS2750F instrumentation type must be ordered separately. No maintenance schedule, spare parts list, or consumables are specified in the supplied facts.