Shimadzu LC-MS 9050
Shimadzu LC-MS 9050 — Mass spectrometers.
The Shimadzu LC-MS 9050 is a quadrupole time-of-flight (QTOF) mass spectrometer configured for LC-MS/MS with PESI and SFC-compatible ion sources. It delivers high-speed positive/negative polarity switching (UFstabilization) and is positioned among the highest mass accuracy stability levels available. It serves as a high-resolution accurate-mass detector for qualitative and quantitative analysis in complex mixtures.
Direct drop-in replacements
Full specifications
Description
Construction and architecture
- Quadrupole time-of-flight (QTOF) mass analyzer with LC-MS/MS configuration. - Ion source options include PESI and SFC-compatible front-end configurations, enabling coupling to liquid chromatography or supercritical fluid chromatography. ### Behavior under load and in different modes
- Supports high-speed positive/negative polarity switching (UFstabilization), allowing rapid alternation between ionization modes within a single acquisition. - Sensitivity is specified as among the highest mass accuracy stability levels available, indicating stable mass accuracy performance under operating conditions. - The system is intended for integration into analytical workflows requiring high-resolution accurate mass detection, typically with a compatible LC or SFC front-end.
Integration & Operating Notes
The 9050 supports PESI and SFC-compatible front-end configurations, but the specific source installed must match the intended separation technique. Using an incompatible source may prevent proper ionization or require hardware changes not covered in the base configuration.
High-speed positive/negative polarity switching is enabled by UFstabilization. Ensure that the controlling software and acquisition method are configured to utilize this feature; otherwise, switching performance may be limited to standard modes.
Selection & Integration Q&A
The 9050 supports PESI and SFC-compatible front-end configurations. Ensure the ion source installed matches your separation technique (LC or SFC) and that the front-end plumbing and electrical connections are compatible with the source specifications.