No photo available yet

Agilent Technologies ·Made in USA · In Active Production

Agilent Technologies 531 Thermocouple Gauge, Rough Vacuum Pressure Measurement

Agilent Technologies 531 Thermocouple Gauge, Rough Vacuum Pressure Measurement — Vacuum technologies.

The Agilent 531 is a thermocouple-type rough-vacuum gauge transducer for pressure measurement in the coarse vacuum regime. It is the thermocouple member of the Vacuum Transducers series, distinct from the Bayard-Alpert ionization tubes (571/572) and the cold-cathode 525 that cover high vacuum. It serves as the foreline/backing-line pressure sensor in a pump-down system.

Agilent Technologies Vacuum Transducers Series — Model Comparison & Selection

Model Measurement rangeAtomic mass unit, gramsElectron charge, coulombMolar volume, litersMax pressure, megapascalSensitivity
531 Thermocouple Gauge, Rough Vacuum Pressure Measurement Current —1.66160222.41——
571 Bayard-Alpert Gauge Tube -3...21.66160222.411.33×10⁻⁴17
572 Tungsten Bayard-Alpert Gauge -3...21.66160222.41-3...2—
Cold Cathode Gauge Tube 525, High Vacuum (HV) Gauge —1.66160222.41——
Hot Filament Gauge MBA2-201, Ionization BA Gauge —1.66160222.41——
IMG-100 Inverted Magnetron Gauge —1.66160222.41——
IMG-300 UHV Inverted Magnetron Gauge —1.66160222.41——
UHV-24/UHV-24p 11.66160222.41—25

Full specifications

Core Performance & Functional Specifications
Electron Charge 1.602 coulomb
Molar Volume 22.41 liters
Acceleration due to gravity mfr 9.8066
Angstrom unit mfr 10 m
Avogadro's number mfr 6.02214076
Boltzmann's constant mfr 1.38064852
Equivalent of heat mfr 4.185
Natural log base mfr 2.7183
Velocity of light mfr 2.9979
Velocity of sound mfr 343
Magnetic flux density mfr 1
Pressure conversion mfr 1 Torr
Pumping speed conversion mfr 1 L/s
Throughput conversion mfr 1 cc/sec
Outgassing rate mfr 2
Dimensions, Weight & Mechanical Design
Atomic Mass Unit 1.6605 grams
Standards, Safety & General Data
Standard pressure mfr 101325 Pa

Description

Construction and series positioning

Measurement behavior

Installation and operation

Integration & Operating Notes

Process Limits
Use only in the rough-vacuum regime, not as a high-vacuum sensor

Thermocouple sensing is intended for coarse vacuum and foreline pressures; for high-vacuum measurement the series provides the 571/572 Bayard-Alpert and 525 cold-cathode tubes. Selecting the 531 for a high-vacuum chamber will not give usable readings and the wrong gauge family must be avoided at the design stage.

Series sibling data (571, 572, 525); Agilent Vacuum Transducers series
Process Limits
Readings are gas-dependent; correct for the actual gas

Thermocouple gauge output depends on the thermal conductivity of the gas present, so a reading calibrated for nitrogen/air will differ in helium, hydrogen or other process gases. Use the gas-property and conversion tables in the Agilent formulas and tables booklet to interpret readings rather than taking the displayed value as absolute pressure.

Agilent 'Vacuum Leak Detection Reference Formulas, Properties, Glossary' brochure 5994-5366EN
Electrical
Electrical and controller data must come from the model manual

The supplied documents are portfolio and reference brochures and contain no 531-specific supply voltage, signal output or cable specification. Do not size the controller or cabling from this card; obtain the electrical interface from the 531 instruction manual before wiring the transducer into a system.

Agilent UHV and leak detection solutions brochure 5994-8433EN (portfolio scope only
Maintenance
Plan gauge replacement or service as a consumable item

Thermocouple gauge tubes are exposed to the foreline environment and are normally treated as serviceable/replaceable items; the portfolio brochure lists spare parts and service options but gives no 531-specific interval. Establish the replacement interval from observed drift in your process rather than assuming a fixed schedule.

Agilent UHV and leak detection solutions brochure 5994-8433EN (spare parts and service options

Selection & Integration Q&A

When should I choose the 531 thermocouple gauge rather than the 571/572 Bayard-Alpert or 525 cold-cathode tubes in this series?

Pick the 531 for rough-vacuum and foreline pressure, where thermocouple sensing is appropriate. Choose the 571 or 572 Bayard-Alpert tubes or the 525 cold-cathode tube when the measurement point is high vacuum; those ionization gauges are a different family and are not substitutes for the 531.

What must I confirm about the controller and cabling before integrating the 531 into a pump-down system?

The supplied brochures give no 531-specific supply voltage, output signal or cable data, so the controller, cable and connector must be matched from the 531 instruction manual. Confirm the gauge's electrical interface before ordering the readout electronics; do not infer it from the series portfolio literature.

What environment and duty limits apply to mounting the 531?

No 531-specific mounting orientation, ambient temperature or duty-cycle limits are stated in the supplied documents, which are portfolio and reference brochures only. Obtain these from the 531 manual before fixing the gauge location; the reference booklet's conversion tables do not substitute for installation limits.

What maintenance and spares should I budget for, and what is not included with the gauge?

The portfolio brochure lists spare parts and service options but no 531-specific interval; treat the gauge tube as a replaceable item and set replacement from observed drift. Controller, cable and readout electronics are separate items and are not part of the base gauge delivery.

Dimensional Drawings & Technical Documentation

Technical documentation