No photo available yet
Agilent Technologies IMG-100 Inverted Magnetron Gauge
Agilent Technologies IMG-100 Inverted Magnetron Gauge — Vacuum technologies.
The IMG-100 is an inverted magnetron gauge for high-vacuum measurement, distinguished within the Agilent transducer series by its cold-cathode design that operates without a hot filament. It is intended for continuous pressure monitoring in vacuum systems where filament burnout or gas interference must be avoided, complementing thermocouple and Bayard-Alpert gauges in the same portfolio.
Agilent Technologies Vacuum Transducers Series — Model Comparison & Selection
| Model | Measurement range | Atomic mass unit, grams | Electron charge, coulomb | Molar volume, liters | Max pressure, megapascal | Sensitivity |
|---|---|---|---|---|---|---|
| IMG-100 Inverted Magnetron Gauge Current | — | 1.66 | 1602 | 22.41 | — | — |
| 531 Thermocouple Gauge, Rough Vacuum Pressure Measurement | — | 1.66 | 1602 | 22.41 | — | — |
| 571 Bayard-Alpert Gauge Tube | -3...2 | 1.66 | 1602 | 22.41 | 1.33×10⁻⁴ | 17 |
| 572 Tungsten Bayard-Alpert Gauge | -3...2 | 1.66 | 1602 | 22.41 | -3...2 | — |
| Cold Cathode Gauge Tube 525, High Vacuum (HV) Gauge | — | 1.66 | 1602 | 22.41 | — | — |
| Hot Filament Gauge MBA2-201, Ionization BA Gauge | — | 1.66 | 1602 | 22.41 | — | — |
| IMG-300 UHV Inverted Magnetron Gauge | — | 1.66 | 1602 | 22.41 | — | — |
| UHV-24/UHV-24p | 1 | 1.66 | 1602 | 22.41 | — | 25 |
Full specifications
| Electron Charge | 1.602 coulomb |
| Molar Volume | 22.41 liters |
| Acceleration due to gravity mfr | 9.8066 |
| Angstrom unit mfr | 10 m |
| Avogadro's number mfr | 6.02214076 |
| Boltzmann's constant mfr | 1.38064852 |
| Equivalent of heat mfr | 4.185 |
| Natural log base mfr | 2.7183 |
| Velocity of light mfr | 2.9979 |
| Velocity of sound mfr | 343 |
| Magnetic flux density mfr | 1 |
| Pressure conversion mfr | 1 Torr |
| Pumping speed conversion mfr | 1 L/s |
| Throughput conversion mfr | 1 cc/sec |
| Outgassing rate mfr | 2 |
| Atomic Mass Unit | 1.6605 grams |
| Standard pressure mfr | 101325 Pa |
Description
Construction and series positioning
- The IMG-100 uses an inverted magnetron (cold-cathode) discharge principle, unlike the sibling 531 thermocouple gauge (rough vacuum) or 571/572 Bayard-Alpert hot-filament gauges (high vacuum).
- No heated filament is present, so the gauge is not damaged by accidental venting to atmosphere at high vacuum and has no filament replacement consumable.
- The series spans rough (531, 536), high-vacuum hot-cathode (571, 572), and this cold-cathode variant; selection depends on pressure range, gas tolerance, and maintenance philosophy.
Behavior and measurement
- The inverted magnetron geometry sustains a discharge at low pressures, providing a current signal proportional to pressure; the exact measurement range is not stated in the verified facts and must be taken from the product datasheet.
- Cold-cathode gauges are generally tolerant of reactive gases and sudden pressure bursts, but the verified facts contain no curve points or range data for this model, so no performance curve is reproduced here.
- The attached reference booklet provides conversion tables (Torr/Pa, pumping speed, throughput) and outgassing rates useful for interpreting gauge readings, but does not list IMG-100-specific coefficients.
Installation and operation
- The document digests do not contain IMG-100-specific installation, connection, or control details; the portfolio leaflet covers pumps and leak detectors, not this gauge.
- Standard high-vacuum practice applies: mount with a clear line of sight to the chamber, avoid vibration, and use the specified flange (not listed in verified facts).
- Electrical connections and controller compatibility must be confirmed against the IMG-100 manual, which is not among the provided digests.
Integration & Operating Notes
The provided documents do not specify the IMG-100 flange type or preferred mounting orientation. The engineer must obtain the IMG-100 datasheet or manual to confirm the mating flange, insertion depth, and any orientation restriction before designing the chamber port.
No electrical specifications (supply voltage, signal output, connector type) for the IMG-100 appear in the verified facts. Integration with a gauge controller or readout must be based on the IMG-100 product manual, not on the generic vacuum reference booklet.
Inverted magnetron gauges require high vacuum to sustain a discharge; operating at rough vacuum can cause discharge instability or contamination. The exact upper pressure limit for the IMG-100 is not stated in the verified facts and must be confirmed from the datasheet before use.
Cold-cathode gauges avoid filament burnout but can accumulate sputter deposits in the discharge cell over time, causing drift. The service interval and cleaning procedure for the IMG-100 are not given in the verified facts; consult the IMG-100 manual for the recommended maintenance schedule.
Selection & Integration Q&A
Choose the IMG-100 when filament burnout from accidental venting or reactive gases is a concern, since it has no hot filament. Choose the 571/572 Bayard-Alpert gauges when a hot-filament gauge is acceptable and a specific high-vacuum range (their key specs list -3...2 Torr) is required. The IMG-100's own range is not in the verified facts.
The verified facts do not list the IMG-100's electrical interface, connector, or compatible controller. The engineer must obtain the IMG-100 manual to confirm the supply voltage, signal output, and cable type; the provided portfolio leaflet covers pumps and leak detectors, not this gauge.
The verified facts contain no mounting orientation, ambient temperature, or vibration limits for the IMG-100. The attached reference booklet gives general vacuum practice but no model-specific limits. Confirm flange, orientation, and environment from the IMG-100 datasheet before installation.
Cold-cathode gauges have no filament consumable, but the discharge cell may need periodic cleaning; the interval is not stated in the verified facts. Cables, controller, and flange hardware are not listed as included and must be ordered separately per the IMG-100 manual.