No photo available yet
Agilent Technologies Hot Filament Gauge MBA2-201, Ionization BA Gauge
Agilent Technologies Hot Filament Gauge MBA2-201, Ionization BA Gauge — Vacuum technologies.
The Agilent MBA2-201 is a hot-filament Bayard-Alpert ionization gauge transducer for high-vacuum measurement, distinct from the 531/536 thermocouple rough-vacuum gauges and the 571/572 gauge tubes in the same series. It is a complete transducer assembly rather than a bare tube, intended for continuous pressure indication in a pumped high-vacuum system.
Agilent Technologies Vacuum Transducers Series — Model Comparison & Selection
| Model | Measurement range | Atomic mass unit, grams | Electron charge, coulomb | Molar volume, liters | Max pressure, megapascal | Sensitivity |
|---|---|---|---|---|---|---|
| Hot Filament Gauge MBA2-201, Ionization BA Gauge Current | — | 1.66 | 1602 | 22.41 | — | — |
| 531 Thermocouple Gauge, Rough Vacuum Pressure Measurement | — | 1.66 | 1602 | 22.41 | — | — |
| 571 Bayard-Alpert Gauge Tube | -3...2 | 1.66 | 1602 | 22.41 | 1.33×10⁻⁴ | 17 |
| 572 Tungsten Bayard-Alpert Gauge | -3...2 | 1.66 | 1602 | 22.41 | -3...2 | — |
| Cold Cathode Gauge Tube 525, High Vacuum (HV) Gauge | — | 1.66 | 1602 | 22.41 | — | — |
| IMG-100 Inverted Magnetron Gauge | — | 1.66 | 1602 | 22.41 | — | — |
| IMG-300 UHV Inverted Magnetron Gauge | — | 1.66 | 1602 | 22.41 | — | — |
| UHV-24/UHV-24p | 1 | 1.66 | 1602 | 22.41 | — | 25 |
Full specifications
| Electron Charge | 1.602 coulomb |
| Molar Volume | 22.41 liters |
| Acceleration due to gravity mfr | 9.8066 |
| Angstrom unit mfr | 10 m |
| Avogadro's number mfr | 6.02214076 |
| Boltzmann's constant mfr | 1.38064852 |
| Equivalent of heat mfr | 4.185 |
| Natural log base mfr | 2.7183 |
| Velocity of light mfr | 2.9979 |
| Velocity of sound mfr | 343 |
| Magnetic flux density mfr | 1 |
| Pressure conversion mfr | 1 Torr |
| Pumping speed conversion mfr | 1 L/s |
| Throughput conversion mfr | 1 cc/sec |
| Outgassing rate mfr | 2 |
| Atomic Mass Unit | 1.6605 grams |
| Standard pressure mfr | 101325 Pa |
Description
Construction and series positioning
- The MBA2-201 is a hot-filament ionization gauge of Bayard-Alpert geometry, packaged as a transducer (gauge head) rather than as a bare gauge tube.
- Within the Agilent vacuum transducer series it sits at the high-vacuum end: the 531 and baffled 536 thermocouple gauges cover rough vacuum, while the 571 and 572 are Bayard-Alpert gauge tubes (the 572 specified as tungsten filament) without transducer packaging.
- Choose the MBA2-201 when a complete, mountable high-vacuum gauge head is required; choose a 571/572 tube when only the sensing tube is needed, and a 531/536 when the measurement task is rough vacuum.
Measurement behavior
- The verified fact set contains no pressure range, sensitivity, filament current, or curve points for this model, so no measurement envelope or response behavior can be stated here. The only pressure-related sibling data are the 571/572 ranges, which do not apply to the MBA2-201.
- The attached documents are a portfolio leaflet and a formulas/tables reference booklet; neither contains model-specific operating data for the MBA2-201.
Installation, connection and control
- No installation, flange, electrical connection, or controller-compatibility facts for this model are present in the verified data. The reference booklet covers general vacuum practice (conductance, pump-down, outgassing, symbols per DIN 28401) but no MBA2-201-specific wiring or control details.
- Consequently, electrical supply, output signal, and controller pairing must be taken from the model-specific instruction manual, which is not among the supplied digests.
Integration & Operating Notes
The MBA2-201 is a transducer assembly; the 571 and 572 in the same series are Bayard-Alpert gauge tubes. If the existing system already has a transducer housing and controller, a bare tube may be the correct spare; if a complete gauge head is needed, the MBA2-201 is the matching item. The verified data do not state interchangeability, so confirm flange and pinout against the model manual.
Hot-filament Bayard-Alpert gauges are high-vacuum instruments; the sibling 571/572 tubes are specified only for the 10^-3 to 10^-2 Torr decade, and the 531/536 thermocouple gauges exist precisely for the rough-vacuum region. Starting a BA filament at elevated pressure risks filament burnout. No MBA2-201-specific pressure limit is given in the verified facts, so the switch-on threshold must be read from its own manual.
In a hot-filament ionization gauge the filament and the gauge tube are wear items, degraded by every exposure to higher pressure and by contamination. The verified data list no spare-part numbers or service interval for the MBA2-201, so spare filaments/tubes and any calibration service must be identified from the model manual or Agilent spare-parts documentation before commissioning.
The two attached documents are a product-portfolio leaflet and a formulas/tables reference booklet; neither prints MBA2-201 ordering codes, electrical connections, or control parameters. Electrical integration (supply, output, controller pairing) must therefore be engineered from the model-specific instruction manual, not from the attached brochures.
Selection & Integration Q&A
Pick the MBA2-201 when a complete high-vacuum transducer head is needed. A 571 or 572 tube is the choice when only the sensing tube is replaced in an existing transducer; the 572 is the tungsten-filament variant. A 531 or baffled 536 thermocouple gauge belongs on the rough-vacuum side, not in the high-vacuum measurement position.
The verified facts give no flange, pinout, supply voltage, or output signal for the MBA2-201, so compatibility with the existing controller and chamber port cannot be confirmed from this data. Obtain the model instruction manual and check connector type, cable, and controller input against the gauge before mounting; do not assume the 571/572 tube interface applies.
A hot-filament BA gauge must not be operated at rough vacuum; the sibling 571/572 tubes are rated only for the 10^-3 to 10^-2 Torr decade, and thermocouple gauges cover the rough range. The MBA2-201's own switch-on threshold is not in the verified facts, so take it from the model manual and interlock filament-on to a proven low pressure.
The verified data list no cable, controller, flange hardware, spare filament, or calibration certificate as included. Treat the filament/tube as a wear item and source spares and any calibration service from Agilent documentation; the attached portfolio leaflet mentions spare parts and service options but prints no ordering codes for this model.