Agilent Technologies SPME Fibers
Agilent Technologies ·Made in USA · In Active Production

Agilent Technologies SPME Fibers

Agilent Technologies SPME Fibers — Sample preparation.

Solid-phase microextraction fiber assembly with a 10 mm coated length, 30 µm PDMS sorption phase (0.6 µL phase volume), mounted in a 23-gauge needle. The 20 mm arrow-length dimension and 1.1 mm arrow outside diameter define the guide/arrow geometry for direct immersion or headspace sampling. Used as the extracting element in GC/HPLC sample preparation, this nonpolar semivolatile modification sits alongside polar (65 µm DVB/PDMS) and Smart variants in the series.

Agilent Technologies Solid Phase Microextraction Spme Series — Model Comparison & Selection

Model Arrow length, mmFiber length, mmPack quantity, pkPhase thickness, µmSorption phase volume, microliter
SPME Fibers Current 20103300.6
Smart SPME Arrows | Solid Phase Microextraction 20103300.6
Smart SPME Fibers 20103300.6

Full specifications

Core Performance & Functional Specifications
Pack Quantity 3 pack
Needle gauge mfr 23 gauge
Arrow outside diameter mfr 1.1 mm
SPME fiber needle gauge mfr 23 gauge
SPME Arrow outside diameter mfr 1.1 mm
SPME Arrow inner core diameter mfr 0.4 mm
Dimensions, Weight & Mechanical Design
Arrow Length 20 mm
Fiber Length 10 mm
Electrical, Power & Drive Specifications
Phase Thickness 30 µm
Sorption Phase Volume 0.6 µL

Description

Construction and series positioning

Behavior and media

Installation and operation

Integration & Operating Notes

Maintenance
Fiber is a consumable; packs are 3 or 5 units

The series is documented in 3-pack and 5-pack configurations, so the fiber assembly is treated as a replaceable consumable rather than a serviceable component. No conditioning, cleaning or replacement-interval procedure is given in the supplied digest, so intervals must come from the full method documentation.

SPME fundamentals digest (5994-5775EN), scope and variants

Selection & Integration Q&A

When should I choose this 30 µm PDMS, 10 mm fiber instead of the 65 µm DVB/PDMS or the Smart SPME variants?

Pick this fiber for nonpolar semivolatile analytes, where the 30 µm PDMS film and 0.6 µL phase volume apply. The 65 µm DVB/PDMS phase is the documented choice for polar volatiles. Smart SPME fibers/Arrows are a separate variant family; select them only if your workflow requires the Smart configuration, which is not specified here.

What adjacent hardware must be compatible with this fiber assembly?

The assembly presents a 23-gauge needle with a 1.1 mm arrow outside diameter and a 10 mm coated length, so the injector septum, guide and desorption port must accept 23-gauge and the 1.1 mm arrow OD. Do not size the guide for the 1.5 mm arrow OD variant. No drive, controller or power-supply interface is documented for this passive fiber.

Are there mounting or duty-cycle limits I must respect during sampling?

The supplied digest gives no temperature, immersion-depth or cycle-count limits for this fiber. The only hard geometric constraints are the 23-gauge needle, 1.1 mm arrow OD and 10 mm fiber length; exceeding the guide bore or bending the needle during septum piercing is the practical risk. Consult the full method documentation for thermal and solvent limits.

What is supplied with the fiber and what maintenance or consumables should I plan for?

The series is packaged in 3-packs and 5-packs; no conditioning vials, holders, guides or cables are listed in the supplied facts, so treat the fiber assembly as the delivered item and confirm accessories separately. No service interval or error-code procedure is documented in the digest; replacement is by swapping the consumable fiber.

Dimensional Drawings & Technical Documentation

Technical documentation

PDF
Solid Phase Microextraction (SPME) Fibers and Arrows
Brochure ·994,0 КБ ·9 pp.
View PDF