Eppendorf MixMate ®
Eppendorf MixMate ® — Thermostatic baths.
The Eppendorf MixMate is a 2DMix-Control benchtop mixer/vortexer with a 3 mm mixing orbit and 1.5 mm vortexing radius, driven by a 40 W motor over 300–3000 rpm (3500 rpm in touch-vortex mode). It is supplied without tube holders, so the working configuration is defined by the holder fitted (PCR 96, 0.5 mL, 1.5 mL, 5/15 mL, 25/50 mL).
Direct drop-in replacements
Full specifications
| Max. Speed | 3000 rpm |
| Mixing And Vortexing Radius | 1.5 mm |
| Mixing Orbit | 3 mm |
| Sample Capacity | 96 |
| Timer | 15 s – 99.3 h s - 99.3 h |
| Dimensions (W × D × H) mfr | 17,0 × 23,0 × 13,0 cm / 6,7 × 9,1 × 5,1 in |
| Product Weight | 4.2 kg |
| Max. Power Consumption | 40 W |
| Mixing Frequency | 300...3000 rpm |
| Voltage | 230 V |
| Touch vortex frequency mfr | 3500 rpm |
| Power Plug | power plug type F |
| Noise level | 50 dB |
Description
Construction and configuration
- Single benchtop unit, 17.0 × 23.0 × 13.0 cm, 4.2 kg, powered from 230 V, 50–60 Hz via a type F plug.
- Delivered without tube holders; the sample capacity (up to 96 positions) and vessel range are set entirely by the holder ordered separately: PCR 96 (5353 040.113), 0.5 mL (5353 040.121), 1.5 mL (5353 040.130), 5/15 mL (5353 040.148), 25/50 mL (5353 040.156).
- No sibling models are defined for this series; positioning is against the holder variants rather than other machines.
Motion and control
- 2DMix-Control combines a 3 mm mixing orbit with a 1.5 mm vortexing radius; mixing frequency is adjustable from 300 to 3000 rpm, and touch-vortex operation runs at 3500 rpm.
- Timer range 15 s to 99.3 h plus continuous operation, so both short vortex pulses and long low-speed incubations are set on the same control.
- Motor rating 40 W; noise level 50 dB.
Installation and operation
- The attached flyer covers tube-holder selection for irregular mixing requirements; no further manual sections were supplied, so wiring, fusing and environmental limits beyond the 230 V supply are not documented here.
Integration & Operating Notes
The base unit has no vessel interface of its own; capacity (up to 96 samples) and tube format are determined solely by the holder fitted. Select the holder before specifying the mixing protocol, since orbit and radius are fixed at 3 mm and 1.5 mm and cannot be adapted to the vessel.
The unit is wired for 230 V, 50–60 Hz and fitted with a type F (Schuko) plug, drawing from a 40 W motor. Installations in regions using other plug standards require an adapter or receptacle change; no other voltage variant is documented for this model.
Timed runs are set between 15 s and 99.3 h, with a continuous mode for unattended operation. Touch-vortex at 3500 rpm is a separate mode from the 300–3000 rpm setpoint range, so protocols should state which mode is used.
Holders are not part of base delivery and must be ordered individually by format (PCR 96, 0.5 mL, 1.5 mL, 5/15 mL, 25/50 mL). Keep the holder matched to the vessel; no service intervals or consumables beyond the holders are documented in the supplied material.
Selection & Integration Q&A
There are no sibling machines; the choice is the holder. Pick the PCR 96 holder for plate-format work up to 96 samples, or the 0.5/1.5/5-15/25-50 mL holders for single tubes. The base unit's 3 mm orbit and 300–3000 rpm range are common to all.
A 230 V, 50–60 Hz outlet with a type F (Schuko) receptacle; the unit draws a 40 W motor and ships with a type F plug. No other voltage variant is documented, so other mains standards need an adapter or receptacle change.
Tube holders are not supplied with the unit (order no. 5353 000.510). Order the required format separately: PCR 96 (5353 040.113), 0.5 mL (5353 040.121), 1.5 mL (5353 040.130), 5/15 mL (5353 040.148) or 25/50 mL (5353 040.156).