No photo available yet

Shimadzu ·Made in Japan · In Active Production

Shimadzu MALDI 8030

Shimadzu MALDI 8030 — Mass spectrometers.

The Shimadzu MALDI 8030 is a dual-polarity benchtop linear MALDI-TOF mass spectrometer with a 355 nm UV laser and 200 Hz scan speed. It is distinguished within its series by TrueClean automated UV source cleaning and FlexiMass slide-format targets, enabling rapid polarity switching without manual intervention. It serves as a compact, high-throughput detector for molecular weight confirmation in proteomics, polymer, and clinical research workflows.

Direct drop-in replacements

0%
match
⚖️ Compare
0%
match
⚖️ Compare

Full specifications

Description

Construction and Positioning

The MALDI 8030 is a benchtop linear MALDI-TOF instrument configured for dual-polarity operation, allowing acquisition in both positive and negative ion modes without manual source venting. Its ion source is MALDI, and the detector is a linear TOF analyzer. The system uses FlexiMass series microscope slide-format targets, which are loaded through a load-lock chamber to maintain source vacuum during sample introduction. This modification is positioned as a compact, automated alternative to floor-standing MALDI-TOF systems, with integrated source cleaning via the patented TrueClean UV laser-based method. ### Behavior and Modes

With a scan speed of 200 Hz and a 355 nm UV laser, the instrument supports rapid spectral acquisition. Dual-polarity capability permits switching between positive and negative ion detection, which is useful for analyzing diverse compound classes (e.g., peptides, polymers, lipids) in a single session. The linear TOF configuration provides unit-mass resolution suitable for molecular weight determination of intact biomolecules and synthetic polymers. No digitized curve points were provided, so dynamic range and mass accuracy are not quantified here. ### Installation and Operation

The load-lock chamber enables sample targets to be introduced without breaking source vacuum, reducing pump-down cycles and improving throughput. TrueClean automated source cleaning uses UV laser irradiation to remove contaminants from the source, minimizing manual maintenance and downtime. The instrument is designed for benchtop installation, with noise output below 55 dB. It complies with ISO 13485:2016 and CE standards, supporting use in regulated laboratory environments. No PDF digests were available to detail electrical, control, or connection specifics.

Integration & Operating Notes

Mounting
Benchtop placement requires stable, vibration-free surface

The instrument is benchtop-configured and should be placed on a rigid, level surface free from excessive vibration to preserve TOF mass accuracy. Ensure adequate clearance for the load-lock chamber and target exchange, and maintain ambient conditions consistent with the laboratory environment.

Factory Specification Sheet
Process Limits
Load-lock chamber must be used for sample introduction

Samples are introduced via FlexiMass slide-format targets through the load-lock chamber. Do not attempt to open the source directly during operation; the load-lock preserves vacuum and prevents contamination. Target loading must follow the specified slide format to ensure proper positioning.

Factory Specification Sheet
Maintenance
TrueClean automated source cleaning reduces manual maintenance

The patented UV laser-based TrueClean function automates source cleaning, but periodic verification of cleaning efficacy is recommended. Follow the manufacturer's schedule for laser and detector checks.

Factory Specification Sheet

Selection & Integration Q&A

When should I choose the MALDI 8030 over other benchtop MALDI-TOF models in the Shimadzu series?

Choose the MALDI 8030 when dual-polarity acquisition and automated UV source cleaning are required in a benchtop format. If only single-polarity operation is needed, or if higher resolution (e.g., reflectron TOF) is essential, consider other models in the series. The 8030 is optimized for rapid, automated workflows with FlexiMass slide targets.

What are the requirements for sample targets and their compatibility with the load-lock?

The MALDI 8030 uses FlexiMass series microscope slide-format targets, which are introduced through the load-lock chamber. Only targets meeting this format should be used; third-party targets may not seal or position correctly, risking vacuum loss or poor spectra. Ensure targets are clean and free of debris before loading.

Dimensional Drawings & Technical Documentation

Technical documentation