Nabertherm LHT 02/17
Nabertherm ·Made in Germany · In Active Production

Nabertherm LHT 02/17

Nabertherm LHT 02/17 — High-temperature furnaces.

The LHT 02/17 is a 2-litre high-temperature chamber furnace with MoSi₂ heating elements, rated to 1750 °C from a 1-phase supply. Its 130 × 145 × 130 mm chamber and 46-minute heating time distinguish it as the smallest non-D variant in the LHT 17 series, suited to laboratory sintering, annealing and melting of small samples.

Nabertherm LHT Series — Model Comparison & Selection

Model Chamber volume, LElectrical connectionMax temperature, °CWeight, kg
LHT 02/17 Current 21-phase175033
LHT 04/17 41-phase175039
LHT 08/17 83-phase4175047
LHT 08/18 83-phase4180047

Full specifications

Core Performance & Functional Specifications
Chamber volume 2 l
Electrical connection 1-phase
Connected mfr 3.40
Heating time mfr 46 min
Inner dimensions (W × D × H) mfr 130 × 145 × 130 mm
Outer dimensions (W × D × H) mfr 430 × 450 mm
Dimensions, Weight & Mechanical Design
Weight 33 kg
Operating Conditions, Environment & Protection
Max temperature 1750 °C

Description

Construction and series positioning

Thermal behaviour

Electrical and control

Documentation scope

Integration & Operating Notes

Process Limits
Do not exceed 1750 °C chamber temperature

The MoSi₂ heating elements and chamber insulation are rated to a 1750 °C maximum. Any process setpoint above this risks element and insulation degradation; verify the actual sample or crucible temperature, not only the controller setpoint, before running.

Factory Specification Sheet
Electrical
Single-phase supply; verify conductor sizing on site

The unit is specified for 1-phase connection. The supplied 'Connected 3.40' value has no unit and cannot be used for breaker or cable sizing; obtain the nameplate current and voltage from the factory before preparing the electrical installation.

Factory Specification Sheet
Control & I/O
Controller configuration is not fixed by the model code

The controller digest describes series 500 functions and the MyNabertherm app but does not list the LHT 02/17. Confirm which controller, program storage and interface options are included before designing data logging or furnace integration.

Prozesssteuerung englisch

Selection & Integration Q&A

When should I choose the LHT 02/17 rather than the 01/17 D, 03/17 D, 04/17 or 08/17?

Pick the 02/17 when a 2-litre chamber (130 × 145 × 130 mm) at up to 1750 °C is enough and the D configuration is not required. Step up to the 04/17 or 08/17 for larger batches; the 01/17 D and 03/17 D are the D-suffixed alternatives at 1 and 3 litres.

What supply and controller provisions must be in place before the furnace can be commissioned?

A 1-phase supply is required, but the supplied 'Connected 3.40' value has no unit, so cable and breaker sizing must come from the nameplate. Controller fitment is not fixed by the model code; confirm the series 500 configuration and any interface options at order.

What is included in base delivery and what must be ordered separately?

The supplied facts list only the furnace itself; no controller model, thermocouple, crucible, exhaust accessory or interface cable is confirmed as included. The controller digest covers series 500 and the MyNabertherm app generically, so accessories and spares must be specified explicitly on the order.

Dimensional Drawings & Technical Documentation

Technical documentation

PDF
Prozesssteuerung englisch
Brochure ·2,8 МБ ·20 pp.
View PDF
PDF
Fiber optics glass english 0
Brochure ·10,3 МБ ·97 pp.
View PDF
PDF
Foundry english
Brochure ·4,2 МБ ·52 pp.
View PDF
PDF
Dental english
Brochure ·13,1 МБ ·72 pp.
View PDF