Elmo Rietschle 2BL2061
Elmo Rietschle ·Made in Germany · In Active Production

Elmo Rietschle 2BL2061

Elmo Rietschle 2BL2061 — Liquid Ring Vacuum Pumps with Max inlet pressure 101.3 kPa, Motor power 4.35 kW.

The 2BL2061 is a single-stage, oil-free liquid-ring vacuum pump from the L-BL2 series, configured as a compact 'Pump in a Box' with a 4.3 kW (50 Hz) / 4.35 kW (60 Hz) IE3 motor and IP55 protection. It handles inlet pressures up to 1013 mbar and is distinguished within the series by its oil-free operation and air cooling, making it suitable for clean, oil-sensitive vacuum duties. Its primary role is to provide reliable vacuum in systems where contamination-free operation and compact integration are required.

Max inlet pressure
101.3 kPa
Motor power
4.35 kW

Elmo Rietschle L-BL2 Series — Model Comparison & Selection

Model Lubrication typeOperating principleMotor power, kWPower supplyWeight, kgNoise level, dB
2BL2061 Current oil-freeliquid ring4.33~ AC7364
2BL2041 oil-freeliquid ring—AC69—
2BL2101 oil-lubricatedVenturi—AC—78
2BL2141 oil-lubricatedliquid ring3.4AC10178
2BL2251 oil-freeliquid ring5.6AC7671
2BL2281 oil-freeliquid ring5.5AC7378
2BL2341 dryliquid ring7AC261—
2BL2501 oil-lubricatedliquid ring15AC58372

Full specifications

Core Performance & Functional Specifications
Lubrication type oil-free
Max inlet pressure 1013 mbar
Motor power 4.3 kW (50 Hz, 380-420 V)
60 Hz, 440-480 V: 4.35 kW
Operating principle liquid ring
Dimensions, Weight & Mechanical Design
Number of stages 1 dimensionless
Weight 73 kg
Electrical, Power & Drive Specifications
Power supply 3~ AC (50/60 Hz)
Operating Conditions, Environment & Protection
Noise level 64 dB(A)
Protection rating IP55
Cooling type air

Description

Construction and series positioning

Behavior under load and media

Installation, connection, and control

Integration & Operating Notes

Electrical
Motor supply must match nameplate voltage and frequency

Applying 50 Hz voltage (380–420 V) to a 60 Hz motor or vice versa will cause overheating, reduced torque, or failure. Verify the actual supply matches the ordered variant before commissioning. The IE3 motor requires proper overload protection set to the full-load current.

Technical Data Sheet — L-BL2 2BL2061 IE3 vacuum pump (EN
Mounting
Ensure unobstructed air flow for cooling

The pump is air-cooled and relies on ambient air circulation. Install with minimum clearances around the fan intake and exhaust; do not enclose in a sealed cabinet without forced ventilation. Ambient temperature limits are not specified in the provided data, but typical practice is to avoid exceeding 40 °C.

Technical Data Sheet — L-BL2 2BL2061 IE3 vacuum pump (EN
Maintenance
Regular inspection of service liquid and bearings

Although oil-free, the liquid-ring pump requires a continuous service liquid (typically water) supply. Check for adequate flow, temperature, and cleanliness; contaminated liquid can cause wear and reduced performance. Bearings are grease-lubricated for life in many models, but periodic inspection is recommended. Refer to the instruction manual for specific intervals.

Technical Data Sheet — L-BL2 2BL2061 IE3 vacuum pump (EN

Selection & Integration Q&A

When should I choose the 2BL2061 over the 2BL2041 or 2BL2251?

Choose 2BL2061 for oil-free liquid-ring duty with 4.3 kW motor, balancing capacity and size. The 2BL2041 is smaller/lower power; the 2BL2251 offers higher power (5.6 kW) for greater capacity. Select 2BL2061 when its flow/pressure curve matches your process and oil-free operation is mandatory.

What are the requirements for the electrical supply and protection?

Provide a 3-phase AC supply matching the motor nameplate: 380–420 V at 50 Hz or 440–480 V at 60 Hz. Use a motor protection circuit breaker or overload relay set to the motor's full-load current (not specified in data sheet). Ensure proper grounding and IP55-compliant connections.

What maintenance items and accessories are not included in the base delivery?

The base pump includes the motor and pump unit but typically excludes service liquid piping, suction/discharge flanges, control panel, and motor protection. A service liquid supply (water) must be provided. Spare parts like seals and bearings are available separately; refer to the manual for scheduled replacement intervals.

Dimensional Drawings & Technical Documentation

Technical documentation

PDF
Technical Data Sheet — L-BL2 2BL2061 IE3 vacuum pump (EN)
Datasheet ·265,4 КБ ·3 pp.
View PDF