Nabertherm QS 70
Nabertherm ·Made in Germany · In Active Production

Nabertherm QS 70

Nabertherm QS 70 — Salt Bath Furnaces.

The QS 70 is an electrically heated martempering salt bath furnace with a 440 × 320 × 680 mm charging basket workspace and a minimum salt fill of 70 kg. It operates up to 550 °C on a 3-phase supply and accepts work charges up to 10 kg. It is positioned as the larger unit in the QS series relative to the QS 20 and QS 30 siblings, for neutral-salt heat treatment of small to medium batches.

Nabertherm QS Series — Model Comparison & Selection

Model Electrical connectionWeight, kgMax temperature, °C
QS 70 Current 3-phase260550
QS 20 1-phase150550
QS 30 1-phase165550

Full specifications

Core Performance & Functional Specifications
Electrical connection 3-phase
min. amount of salt mfr 70
Heating mfr 8,0
Outer dimensions (W × D × H) mfr 1000 × 700 × 1020 mm
Dimensions, Weight & Mechanical Design
Weight 260 kg
max. charge weight mfr 10
Electrical, Power & Drive Specifications
Work space dimensions in the charging basketin mm mfr 440
Work space dimensions in the charging basketin mm mfr 320
Work space dimensions in the charging basketin mm mfr 680
Operating Conditions, Environment & Protection
Max temperature 550 °C

Description

Construction and series positioning

Process behavior

Control and operation

Integration & Operating Notes

Electrical
3-phase supply required; no single-phase variant documented

The QS 70 is specified for a 3-phase electrical connection. The available facts do not state voltage, current, or frequency, so the site supply must be confirmed against the nameplate before installation; no single-phase configuration is documented for this model.

Factory Specification Sheet
Process Limits
Charge weight must not exceed 10 kg

The maximum charge weight is 10 kg. Exceeding it risks salt displacement, uneven treatment, and mechanical stress on the charging basket; the basket workspace of 440 × 320 × 680 mm should be loaded within this weight limit regardless of volume.

Factory Specification Sheet
Process Limits
Bath requires at least 70 kg of neutral salt

The minimum salt amount is 70 kg. Operating below this inventory compromises temperature stability and immersion coverage of the charge; the salt level must be maintained at or above this fill for martempering service up to 550 °C.

Factory Specification Sheet
Control & I/O
Controller options documented separately from furnace model

The controller digest covers the 500 series and MyNabertherm app, including process data storage and AMS2750F instrumentation types, but contains no QS 70-specific settings. Controller selection and configuration must be confirmed against the furnace order documentation.

Prozesssteuerung englisch

Selection & Integration Q&A

When should I choose the QS 70 rather than the QS 20 or QS 30?

Choose the QS 70 when the charge fits within 10 kg and the 440 × 320 × 680 mm basket workspace, and when a 70 kg minimum salt inventory is acceptable. The QS 20 and QS 30 are smaller siblings; the supplied facts do not list their capacities, so confirm their workspace and charge limits before downsizing.

What supply and controller requirements must be met before installing the QS 70?

The furnace requires a 3-phase connection; voltage, current, and frequency are not stated in the supplied facts and must be read from the nameplate. Controller options are covered in the separate 500-series/MyNabertherm documentation, which does not include QS 70-specific wiring, so the control cabinet and sensor configuration must be confirmed with the order documents.

What maintenance and consumables are required, and what is not included in base delivery?

The supplied facts contain no maintenance schedule, service intervals, or list of included accessories. Neutral salt for the minimum 70 kg bath fill and any charging basket handling equipment are not documented as part of base delivery; these must be confirmed against the order and the furnace manual, which is not included in the supplied digests.

Dimensional Drawings & Technical Documentation

Technical documentation

PDF
Prozesssteuerung englisch
Brochure ·2,8 МБ ·20 pp.
View PDF
PDF
Fiber optics glass english 0
Brochure ·10,3 МБ ·97 pp.
View PDF
PDF
Foundry english
Brochure ·4,2 МБ ·52 pp.
View PDF
PDF
Dental english
Brochure ·13,1 МБ ·72 pp.
View PDF