No photo available yet
Nabertherm W 5000
Nabertherm W 5000 — Furnace Solutions 1400 Degc.
The W 5000 is a bogie hearth furnace with a 5000 l chamber (1000 × 3600 × 1400 mm) and wire heating for a maximum temperature of 1280 °C. It is the mid-size model in the W series, positioned between the W 1500 and W 7500, and is intended for batch heat treatment of large, heavy loads that can be loaded onto a rail-mounted bogie.
Nabertherm Bogie Hearth Furnaces with Wire Heating up to 1400 °C | Nabertherm Series — Model Comparison & Selection
Full specifications
| Chamber volume | 5000 l |
| Chamber volume | 5000 l |
| Electrical connection | 3-phase |
| Electrical connection | 3-phase |
| Heating power | 185 watt |
| Heating power | 185 watt |
| Inner dimensions (W × D × H) mfr | 1000 × 3600 × 1400 mm |
| Outer dimensions (W × D × H) mfr | 1670 × 4390 × 2520 mm |
| Weight | 7300 kg |
| Weight | 7300 kg |
| Max temperature | 1280 °C |
| Max temperature | 1280 °C |
Description
Construction and positioning
- The W 5000 is a bogie hearth furnace: the load sits on a wheeled hearth that travels out of the fixed chamber for loading and unloading. This distinguishes it from chamber furnaces and from smaller W-series models such as the W 1500, which use a stationary hearth.
- The chamber measures 1000 mm wide × 3600 mm deep × 1400 mm high, giving a volume of 5000 l. The outer envelope is 1670 × 4390 × 2520 mm, and the furnace weighs 7300 kg.
- Within the W series, the W 5000 is the mid-volume option; the W 1500 and W 7500 bracket it in chamber size. The W 5000/H is a separate variant (the suffix is not defined in the supplied facts) and should not be confused with this model.
Heating and load behavior
- Heating is by wire elements, with a maximum chamber temperature of 1280 °C. The electrical supply is 3-phase. The matched heating-power value (185 W) is not physically consistent with a 5000 l furnace and is therefore omitted from this card; consult the factory specification for the actual connected load.
- No digitized curve points were supplied, so heat-up rate, uniformity, and recovery behavior cannot be stated here. The controller documentation references AMS2750F instrumentation types and temperature-uniformity surveys, which are relevant when the process requires documented uniformity.
Control and operation
- The furnace is compatible with Nabertherm's 500-series controllers and the MyNabertherm app for process-data storage and recipe management, as described in the controller digest. Recorder and controller options are available but are not part of the base delivery unless ordered.
- The supplied document digests do not contain model-specific installation, connection, or operating instructions for the W 5000; the notes below are limited to general requirements that follow from the furnace type and the controller documentation.
Integration & Operating Notes
The furnace is compatible with Nabertherm 500-series controllers and the MyNabertherm app for process-data storage. Recorders and AMS2750F instrumentation types are options; if the process requires documented temperature uniformity or traceable records, these must be specified at order time.
The wire heating elements and chamber insulation are rated for a maximum of 1280 °C. Operating above this limit will shorten element life and may damage the refractory. The controller setpoint should be limited accordingly, and the actual load thermocouple should be used for process control rather than relying on the furnace control thermocouple alone.
Selection & Integration Q&A
Choose the W 5000 when the load fits within 1000 × 3600 × 1400 mm and the batch volume is around 5000 l. The W 1500 is smaller and lighter for lower-throughput work; the W 7500 offers more chamber volume for larger batches. The W 5000/H is a distinct variant and should be evaluated separately.
A 3-phase supply sized to the factory connected load (the 185 W figure in the supplied data is not credible and must be confirmed) is required. A Nabertherm 500-series controller or equivalent is needed for temperature programming; recorders and AMS2750F instrumentation are options, not base delivery.
The 7300 kg furnace plus load must be supported on a level, load-rated foundation with rails aligned to the chamber. The bogie travel path must be clear and level so the hearth seals correctly. Ambient conditions and ventilation should follow the factory installation instructions, which are not included in the supplied digests.
The base furnace includes the chamber, bogie hearth, and wire heating elements. Controllers, recorders, the MyNabertherm app connection, and AMS2750F instrumentation are options. Consumables such as thermocouples and door seals are wear items; the supplied documents do not list a specific spares kit for the W 5000.