Nabertherm W 7500/H
Nabertherm W 7500/H — Furnace Solutions 1400 Degc.
The W 7500/H is a bogie hearth furnace with a 7500-litre chamber (1000 × 5400 × 1400 mm) and wire heating for a maximum temperature of 1340 °C. Its 5400-mm depth distinguishes it from the shorter W 5000/H and W 1500 variants in the series. It is intended for batch heat treatment of long or bulky loads that are charged on a rail-mounted bogie.
Nabertherm Bogie Hearth Furnaces with Wire Heating up to 1400 °C | Nabertherm Series — Model Comparison & Selection
Full specifications
| Chamber volume | 7500 l |
| Electrical connection | 3-phase |
| Heating power | 370 watt |
| Inner dimensions (W × D × H) mfr | 1000 × 5400 × 1400 mm |
| Outer dimensions (W × D × H) mfr | 1670 × 6190 × 2520 mm |
| Weight | 10300 kg |
| Max temperature | 1340 °C |
Description
Construction and series positioning
- The W 7500/H is the long-chamber member of the W-series bogie hearth furnaces: inner dimensions 1000 mm wide × 5400 mm deep × 1400 mm high, giving a 7500-litre working volume.
- Compared with the W 5000/H and W 1500 siblings, the distinguishing feature is chamber depth, not width or height; the 5400-mm depth suits elongated loads that cannot be charged into shorter bogie furnaces.
- Outer dimensions are 1670 × 6190 × 2520 mm and the furnace weighs 10300 kg, so the foundation and handling plan must accommodate a unit of this footprint and mass.
- Heating is by wire elements; the maximum temperature is 1340 °C, placing this model in the 1400 °C-class furnace group.
Electrical and thermal behaviour
- The furnace is connected to a 3-phase supply. The matched specification lists a heating power of 370 W, which is not physically consistent with a 7500-litre furnace at 1340 °C; this value is therefore not usable for electrical design and must be confirmed against the nameplate or order documentation.
- No digitized heating or cooling curves were supplied for this model, so no heat-up or cool-down rates are stated here.
Control and documentation
- The attached controller digest covers the Nabertherm 500-series controllers and the MyNabertherm app, including process-data storage and AMS2750F temperature-uniformity instrumentation types, but it prints no furnace-specific settings for the W 7500/H.
- The remaining attached documents (fiber-optics glass, foundry, dental) cover other product lines and contain no W 7500/H installation or operating data; model-specific installation, connection and operating instructions must be taken from the furnace's own manual.
Integration & Operating Notes
The maximum temperature of 1340 °C is the ceiling for this model; operating above it risks wire-element and lining damage. Because no model-specific curves were supplied, permissible heating rates and load-dependent limits must be taken from the furnace manual before the first firing.
The furnace is a 3-phase unit, but the matched heating-power figure (370 W) is inconsistent with a 7500-litre, 1340 °C chamber and cannot be used for cable or breaker sizing. Obtain the connected load and full-load current from the nameplate or order-specific circuit diagram.
The furnace alone weighs 10300 kg and occupies an outer footprint of 1670 × 6190 mm. The floor and bogie rail system must be designed for the furnace mass plus the weight of the charge and the bogie, and the 2520-mm outer height must be checked against hall clearance and crane access.
The attached controller document describes the 500-series controllers and MyNabertherm app, including process-data storage and AMS2750F instrumentation types, but gives no W 7500/H-specific parameters. Program setup, thermocouple type and recorder options must be confirmed against the order-specific control documentation.
Selection & Integration Q&A
Choose the W 7500/H when the load requires the 5400-mm chamber depth and the 7500-litre volume at up to 1340 °C. The W 5000/H and W 1500 offer shorter chambers; select them when the workload fits their smaller depths and the larger footprint and 10300-kg mass of the W 7500/H are not justified.
The unit is 3-phase, but the listed 370-W heating power is inconsistent with a 7500-litre, 1340 °C furnace and must not be used for design. Obtain the connected load, full-load current and protective-device ratings from the nameplate or order-specific circuit diagram before sizing cables and switchgear.
Plan for a foundation and bogie rail system that carry the 10300-kg furnace plus the loaded bogie, within an outer footprint of 1670 × 6190 mm and an outer height of 2520 mm. Confirm hall clearance and crane or charging access along the 5400-mm chamber depth before installation.
The attached documents contain no W 7500/H-specific maintenance schedule, service intervals or accessory list; the controller digest covers only generic 500-series functions. Maintenance intervals, spare wire elements, thermocouples and charging accessories must be requested with the order-specific manual.