Elmo Rietschle 2BL2041
Elmo Rietschle ·Made in Germany · In Active Production

Elmo Rietschle 2BL2041

Elmo Rietschle 2BL2041 — Liquid Ring Vacuum Pumps.

The 2BL2041 is a single-stage, oil-free liquid-ring vacuum pump from Elmo Rietschle's L-BL2 'Pump in a Box' series, supplied as a compact circuit with an IE3 AC motor in IP55 protection. It is distinguished within the series by its oil-free operation and air cooling, positioning it between smaller and larger liquid-ring siblings. Its primary purpose is to generate vacuum in processes where oil contamination is unacceptable and a simple, self-contained package is preferred.

Elmo Rietschle L-BL2 Series — Model Comparison & Selection

Model Lubrication typeOperating principleMotor power, kWPower supplyWeight, kgNoise level, dB
2BL2041 Current oil-freeliquid ring—AC69—
2BL2061 oil-freeliquid ring4.33~ AC7364
2BL2101 oil-lubricatedVenturi—AC—78
2BL2141 oil-lubricatedliquid ring3.4AC10178
2BL2251 oil-freeliquid ring5.6AC7671
2BL2281 oil-freeliquid ring5.5AC7378
2BL2341 dryliquid ring7AC261—
2BL2501 oil-lubricatedliquid ring15AC58372

Full specifications

Core Performance & Functional Specifications
Lubrication type oil-free
Operating principle liquid ring
Dimensions, Weight & Mechanical Design
Number of stages 1 dimensionless
Weight 69 kg
Electrical, Power & Drive Specifications
Power supply AC
Operating Conditions, Environment & Protection
Protection rating IP55
Cooling type air

Description

Construction and series positioning

Behavior under load and media

Installation, connection and operation

Integration & Operating Notes

Electrical
Motor voltage variant must match site supply exactly

The 2BL2041-2 is offered in four motor voltage variants (K50-1B, K50-6B, Q50-3B, Q50-7B). Connecting a motor wound for one voltage to a different supply will cause overheating, loss of torque or immediate failure. Verify the nameplate against the site voltage and frequency before commissioning.

Technical Data Sheet — L-BL2 2BL2041 IE3 vacuum pump (EN
Cooling & Media
Air cooling requires unobstructed ambient airflow

The pump is air-cooled, so it must be installed with sufficient clearance around the enclosure for convective airflow. Restricting airflow or placing the unit in a hot, enclosed cabinet will reduce cooling capacity and may lead to motor overheating or reduced vacuum performance.

Technical Data Sheet — L-BL2 2BL2041 IE3 vacuum pump (EN
Process Limits
Working liquid quality affects vacuum and pump life

As a liquid-ring pump, the working liquid (typically water) must be clean and compatible with the pump internals. Contaminated or scaling water can clog the ring circuit, reduce achievable vacuum and accelerate wear. A strainer or filtration on the liquid supply is recommended where particulate is present.

Technical Data Sheet — L-BL2 2BL2041 IE3 vacuum pump (EN

Selection & Integration Q&A

When should I choose the 2BL2041 over the 2BL2061 or 2BL2141?

Choose the 2BL2041 when oil-free liquid-ring vacuum is required and the duty fits its single-stage performance. The 2BL2061 offers higher motor power (4.3 kW) for greater capacity; the 2BL2141 is oil-lubricated and suited where oil carryover is acceptable. The 2BL2041 is the oil-free option in this power band.

What ambient and duty-cycle limits apply to the 2BL2041?

The pump is air-cooled, so it must be installed with adequate ventilation and ambient temperature within the motor's rating. Continuous duty is assumed for a liquid-ring pump; frequent starts or high ambient may require derating. Refer to the instruction manual for exact ambient limits and duty-cycle guidance.

What maintenance and accessories are required for the 2BL2041?

Oil-free design eliminates oil changes, but the working liquid circuit requires periodic inspection for contamination and scaling. The base delivery does not include process piping, liquid supply fittings or electrical cables; these must be sourced separately. Refer to the manual for service intervals on seals and bearings.

Dimensional Drawings & Technical Documentation

Technical documentation

PDF
Technical Data Sheet — L-BL2 2BL2041 IE3 vacuum pump (EN)
Datasheet ·344,0 КБ ·2 pp.
View PDF