Elmo Rietschle 2BL2101
Elmo Rietschle ·Made in Germany · In Active Production

Elmo Rietschle 2BL2101

Elmo Rietschle 2BL2101 — Liquid Ring Vacuum Pumps.

The 2BL2101 is an oil-lubricated, Venturi-principle vacuum pump in the L-BL2 'Pump in a Box' series, supplied as a compact circuit pump with a 3~ AC motor, IP55 protection and air cooling. It is distinguished within the series by its oil-lubricated construction, whereas siblings such as the 2BL2041, 2BL2061 and 2BL2251 are oil-free liquid-ring units. Its primary role is to generate vacuum in systems where an oil-lubricated Venturi pump is acceptable, using the ordering-code voltage/frequency variants for 50/60 Hz integration.

Elmo Rietschle L-BL2 Series — Model Comparison & Selection

Model Lubrication typeOperating principleMotor power, kWPower supplyWeight, kgNoise level, dB
2BL2101 Current oil-lubricatedVenturi—AC—78
2BL2041 oil-freeliquid ring—AC69—
2BL2061 oil-freeliquid ring4.33~ AC7364
2BL2141 oil-lubricatedliquid ring3.4AC10178
2BL2251 oil-freeliquid ring5.6AC7671
2BL2281 oil-freeliquid ring5.5AC7378
2BL2341 dryliquid ring7AC261—
2BL2501 oil-lubricatedliquid ring15AC58372

Full specifications

Core Performance & Functional Specifications
Lubrication type oil-lubricated
Operating principle Venturi
Electrical, Power & Drive Specifications
Power supply AC
Operating Conditions, Environment & Protection
Noise level 78 dB
Protection rating IP55
Cooling type air

Description

Construction and series positioning

Behavior and media

Installation and operation

Integration & Operating Notes

Electrical
Order the correct voltage/frequency variant code

The 2BL2101 is supplied in 50 Hz and 60 Hz variants identified by ordering-code suffixes K50-1B, K50-6B, Q50-7B and Q50-3B. Specifying the wrong code results in a motor incompatible with the site supply; confirm the exact code against the technical data sheet before ordering.

Technical Data Sheet — L-BL2 2BL2101 IE3 vacuum pump (EN
Cooling & Media
Air cooling requires unobstructed airflow around the unit

Cooling type is air, so the installation location must allow ambient airflow over the pump. Enclosing the unit or placing it in a restricted space without ventilation will raise operating temperatures; the data sheet does not quantify airflow requirements, so verify against the full manual.

Technical Data Sheet — L-BL2 2BL2101 IE3 vacuum pump (EN
Maintenance
Oil lubrication makes oil condition a maintenance item

This model is oil-lubricated, unlike the oil-free siblings in the series. Maintenance planning must therefore include oil checks and replacement, although the available digest does not state intervals or oil grade; obtain these from the full instruction manual before commissioning.

Technical Data Sheet — L-BL2 2BL2101 IE3 vacuum pump (EN
Process Limits
No published curve points for this model

The available data contains no digitized curve points for the 2BL2101, so suction performance cannot be read from a curve. Performance must be taken from the technical data sheet or confirmed with the manufacturer for the specific voltage/frequency variant selected.

Technical Data Sheet — L-BL2 2BL2101 IE3 vacuum pump (EN

Dimensional Drawings & Technical Documentation

Technical documentation

PDF
Technical Data Sheet — L-BL2 2BL2101 IE3 vacuum pump (EN)
Datasheet ·266,2 КБ ·3 pp.
View PDF