Nabertherm W 1500
Nabertherm W 1500 — Furnace Solutions 1400 Degc.
The W 1500 is a bogie hearth furnace with a 1500 l chamber (900 × 1900 × 900 mm) and wire heating for a maximum temperature of 1280 °C. It is the base 1500-litre size in the W series, with the W 1500/14 as a higher-temperature variant and the larger W 5000 variants for bigger loads. It is intended for batch heat treatment of heavy loads on a rail-mounted bogie hearth.
Nabertherm Bogie Hearth Furnaces with Wire Heating up to 1400 °C | Nabertherm Series — Model Comparison & Selection
Full specifications
| Chamber volume | 1500 l |
| Electrical connection | 3-phase |
| Heating power | 75 watt |
| Inner dimensions (W × D × H) mfr | 900 × 1900 × 900 mm |
| Outer dimensions (W × D × H) mfr | 1570 × 2690 × 2020 mm |
| Weight | 3500 kg |
| Max temperature | 1280 °C |
Description
Construction and series positioning
- The W 1500 uses a bogie hearth architecture: the load sits on a movable hearth that travels into the fixed heating chamber, allowing heavy parts to be loaded outside the furnace.
- Chamber volume is 1500 l with inner dimensions of 900 mm width × 1900 mm depth × 900 mm height; outer dimensions are 1570 × 2690 × 2020 mm and the furnace weighs 3500 kg.
- Within the W series, the W 1500 is the base 1500-litre size; the W 1500/14 is a higher-temperature variant, while the W 5000, W 5000/H and W 7500 offer larger chamber volumes for bigger loads.
Heating and electrical configuration
- Heating is by wire elements; the maximum temperature for this model is 1280 °C.
- The electrical connection is 3-phase. The heating power value in the source data (75 W) is not consistent with a furnace of this size and is therefore not stated here; the actual connected load must be taken from the nameplate or the dedicated wiring diagram.
Operation and control
- The attached controller documentation covers the Nabertherm 500 series and the MyNabertherm app, including process data storage and temperature uniformity instrumentation per AMS2750F. No furnace-specific control configuration is printed for the W 1500.
- No digitized curve points or application notes were supplied for this model, so heat-up and uniformity behaviour cannot be quantified from the available facts.
Integration & Operating Notes
The source data lists 75 W heating power, which is implausible for a 1500 l furnace at 1280 °C. The actual 3-phase connected load and fuse rating must be read from the furnace nameplate or the model-specific circuit diagram before the power feed and protection devices are specified.
The furnace weighs 3500 kg and the bogie hearth must be able to travel out of the chamber for loading. The installation floor must support this weight plus the load, and the free space in front of the furnace must accommodate the extracted hearth and the loading equipment.
The controller digest covers the 500 series and MyNabertherm app, including process data storage and AMS2750F instrumentation types, but does not state which controller is fitted to the W 1500. The control configuration and any recorder options must be confirmed against the order-specific documentation.
Selection & Integration Q&A
Choose the W 1500 for 1500 l loads up to 1280 °C. The W 1500/14 is the higher-temperature variant of the same size; the W 5000, W 5000/H and W 7500 are for larger chamber volumes. Select by required temperature first, then by load volume.
The furnace is 3-phase, but the listed 75 W heating power is not credible for this size; confirm the actual connected load and fuse rating from the nameplate. The controller type is not specified in the supplied documents, so the control interface and any recorder must be confirmed per order.
The supplied documents do not define maintenance intervals or included accessories for the W 1500. Controller options, recorders and thermocouples are described only as catalog options; the actual scope of delivery and service schedule must be confirmed with the order documentation.