BINDER ED 260
BINDER ·Made in Germany · In Active Production

BINDER ED 260

BINDER ED 260 — Drying ovens with Temperature 5…300 °C.

The BINDER ED 260 is a 255 L natural-convection drying and heating oven (ED260-230V, Art. 9010-0339) rated +5 to 300 °C with 2.25 kW single-phase heating. Its 810×940×760 mm interior and 40 kg/rack load capacity distinguish it from smaller ED 23/56/115 siblings, while the 3×/h air change suits gentle drying and heat treatment of solid or bulk materials.

Temperature
5…300 °C

BINDER ED Series — Model Comparison & Selection

Model Temperature, °CAir change rate, 1/hourDepth, mmHeating up time to 150 c, minHeight, cmInterior volume, L
ED 260 Current 5–30037605094255
ED 115 5–30066054570.5114
ED 23 5–300135202849.520
ED 400 5–3001076571102.5400
ED 56 5–30085655062.557
ED 720 5–300287085159743

Full specifications

Core Performance & Functional Specifications
Temperature 5...300 °C
Air change rate 3 x/h
Heating time to 150°C 50 min
Interior volume 255 L
Load per rack 40 kg (ED260-230V / ED260UL-240V)
Nominal power 2.25 kW
Permitted load 270 kg (ED260-230V / ED260UL-240V)
Temperature fluctuation 0.8 K
Temperature uniformity 1.8 K
Rear wall clearance 160 mm (ED260-230V / ED260UL-240V)
Side wall clearance 100 mm (ED260-230V / ED260UL-240V)
Article Number mfr 9010
Recovery time after door was opened for 30 s at 150°C mfr 20 min
Dimensions, Weight & Mechanical Design
Depth 760 mm (ED260-230V / ED260UL-240V)
Height 940 mm (ED260-230V / ED260UL-240V)
Width 810 mm (ED260-230V / ED260UL-240V)
Net weight of the unit (empty) mfr 85 kg
Electrical, Power & Drive Specifications
Power frequency 50 Hz
Rated voltage 230 V
Unit fuse 12.5 A
Phase (Nominal voltage) mfr 1

Description

Construction and series positioning

Thermal behavior and control

Installation and operation

Integration & Operating Notes

Process Limits
Metallic surfaces may discolor above 150 °C; this is normal

At temperatures above 150 °C, stainless steel interior parts can develop a harmless oxidation tint. This does not affect function or safety and requires no corrective action; avoid abrasive cleaning that could damage the passive layer.

Operating Manual BD-ED-FD (E2), Section 2, p.15

Selection & Integration Q&A

When should I choose the ED 260 over the smaller ED 115 or larger ED 400?

Pick the ED 260 for 255 L batches needing up to 300 °C with single-phase 230 V supply and 2.25 kW heating. The ED 115 suits smaller loads on the same voltage; the ED 400 requires 400 V 3N~ and is for larger volumes. All share the +5 to 300 °C range and natural convection.

What supply and fusing does the ED 260 require, and can it run on a standard wall outlet?

It needs 230 V 1N~ 50/60 Hz within ±10 %, 2.25 kW nominal, with a 12.5 A time-lag external fuse. The 230 V variant uses an IEC connector with CEE 7/7 shockproof plug; ensure the circuit and outlet are rated for at least 12.5 A and are not shared with high-draw equipment.

What maintenance and accessories are required beyond the base unit?

Schedule annual maintenance and electrical safety tests per EN 50678/50699 by qualified personnel. Recommended cleaning agents: neutral cleaner Art. 1002-0016 and disinfectant spray Art. 1002-0022. Optional RS 422/APT-COM 4, analog temperature output, and audible over-temperature alarm are not included in base delivery.

Dimensional Drawings & Technical Documentation

Technical documentation

PDF
Data Sheet Model ED 260 en
Datasheet ·453,7 КБ ·8 pp.
View PDF
PDF
QuickStartGuide BD BF ED FD FED E31 03 2023 dt en fr
Manual ·1,7 МБ ·35 pp.
View PDF
PDF
BD ED FD (E2) 09 2026 en
Manual ·12,9 МБ ·71 pp.
View PDF