Elmo Rietschle 2BL2101
Elmo Rietschle 2BL2101 — Liquid Ring Vacuum Pumps.
The 2BL2101 is an oil-lubricated, Venturi-principle vacuum pump in the L-BL2 'Pump in a Box' series, supplied as a compact circuit pump with a 3~ AC motor, IP55 protection and air cooling. It is distinguished within the series by its oil-lubricated construction, whereas siblings such as the 2BL2041, 2BL2061 and 2BL2251 are oil-free liquid-ring units. Its primary role is to generate vacuum in systems where an oil-lubricated Venturi pump is acceptable, using the ordering-code voltage/frequency variants for 50/60 Hz integration.
Elmo Rietschle L-BL2 Series — Model Comparison & Selection
| Model | Lubrication type | Operating principle | Motor power, kW | Power supply | Weight, kg | Noise level, dB |
|---|---|---|---|---|---|---|
| 2BL2101 Current | oil-lubricated | Venturi | — | AC | — | 78 |
| 2BL2041 | oil-free | liquid ring | — | AC | 69 | — |
| 2BL2061 | oil-free | liquid ring | 4.3 | 3~ AC | 73 | 64 |
| 2BL2141 | oil-lubricated | liquid ring | 3.4 | AC | 101 | 78 |
| 2BL2251 | oil-free | liquid ring | 5.6 | AC | 76 | 71 |
| 2BL2281 | oil-free | liquid ring | 5.5 | AC | 73 | 78 |
| 2BL2341 | dry | liquid ring | 7 | AC | 261 | — |
| 2BL2501 | oil-lubricated | liquid ring | 15 | AC | 583 | 72 |
Full specifications
| Lubrication type | oil-lubricated |
| Operating principle | Venturi |
| Power supply | AC |
| Noise level | 78 dB |
| Protection rating | IP55 |
| Cooling type | air |
Description
Construction and series positioning
- The 2BL2101 is a compact circuit vacuum pump from the L-BL2 N series, marketed as 'Pump in a Box', with an oil-lubricated lubrication type and Venturi operating principle.
- Unlike the liquid-ring siblings 2BL2041, 2BL2061 and 2BL2251, which are oil-free, this model uses oil lubrication; the 2BL2141 is the other oil-lubricated sibling but is a liquid-ring unit with a 3.4 kW motor.
- The pump is driven by a 3~ AC motor in IP55 protection with insulation class F, available in 50 Hz and 60 Hz variants via ordering-code suffixes K50-1B, K50-6B, Q50-7B and Q50-3B.
Behavior and media
- No digitized curve points are available for this model, so performance mapping must rely on the technical data sheet and factory specifications rather than published curves.
- The Venturi principle and oil lubrication define the media compatibility: the pump is intended for service where oil-lubricated operation is acceptable, not for oil-free liquid-ring duties covered by other series members.
- Air cooling is specified, so the surrounding airflow and ambient conditions directly affect thermal behavior; noise level is stated at 78 dB.
Installation and operation
- The technical data sheet identifies the unit as a compact circuit pump with voltage/frequency variants; selection of the correct ordering code for the site supply is therefore part of the installation specification.
- IP55 protection and insulation class F govern the electrical enclosure and winding limits; no further control or connection details are provided in the available document digest.
Integration & Operating Notes
The 2BL2101 is supplied in 50 Hz and 60 Hz variants identified by ordering-code suffixes K50-1B, K50-6B, Q50-7B and Q50-3B. Specifying the wrong code results in a motor incompatible with the site supply; confirm the exact code against the technical data sheet before ordering.
Cooling type is air, so the installation location must allow ambient airflow over the pump. Enclosing the unit or placing it in a restricted space without ventilation will raise operating temperatures; the data sheet does not quantify airflow requirements, so verify against the full manual.
This model is oil-lubricated, unlike the oil-free siblings in the series. Maintenance planning must therefore include oil checks and replacement, although the available digest does not state intervals or oil grade; obtain these from the full instruction manual before commissioning.
The available data contains no digitized curve points for the 2BL2101, so suction performance cannot be read from a curve. Performance must be taken from the technical data sheet or confirmed with the manufacturer for the specific voltage/frequency variant selected.