Elmo Rietschle 2BL2141
Elmo Rietschle ·Made in Germany · In Active Production

Elmo Rietschle 2BL2141

Elmo Rietschle 2BL2141 — Liquid Ring Vacuum Pumps with Motor power 3.4 kW.

The 2BL2141 is an oil-lubricated liquid ring vacuum pump from the L-BL2 series, driven by a 3.4 kW AC motor and protected to IP55. It is the oil-lubricated modification within a series that also includes oil-free liquid ring and Venturi variants, distinguishing it by its lubrication method rather than a different operating principle. Its primary purpose is to generate vacuum in industrial systems where an oil-lubricated liquid ring pump is acceptable and a compact, air-cooled package is required.

Motor power
3.4 kW

Elmo Rietschle L-BL2 Series — Model Comparison & Selection

Model Lubrication typeOperating principleMotor power, kWPower supplyWeight, kgNoise level, dB
2BL2141 Current oil-lubricatedliquid ring3.4AC10178
2BL2041 oil-freeliquid ring—AC69—
2BL2061 oil-freeliquid ring4.33~ AC7364
2BL2101 oil-lubricatedVenturi—AC—78
2BL2251 oil-freeliquid ring5.6AC7671
2BL2281 oil-freeliquid ring5.5AC7378
2BL2341 dryliquid ring7AC261—
2BL2501 oil-lubricatedliquid ring15AC58372

Full specifications

Core Performance & Functional Specifications
Lubrication type oil-lubricated
Motor power 3.4 kW (50 Hz)
60 Hz: 3.4 kW
Operating principle liquid ring
Dimensions, Weight & Mechanical Design
Weight 101 kg
Electrical, Power & Drive Specifications
Power supply AC
Operating Conditions, Environment & Protection
Noise level 78 dB
Operating temperature F
Protection rating IP55
Cooling type air

Description

Construction and series positioning

Behavior under load and media

Installation, connection and control

Integration & Operating Notes

Electrical
Motor variant must be fixed at order time

The ordering code 2BL2141-2 □ K50-1B / K50-6B / Q50-7B defines distinct 50 Hz and 60 Hz voltage variants. Supplying the wrong voltage or frequency variant will change the motor speed and therefore the vacuum performance, and may overload the 3.4 kW winding. Confirm the site supply before placing the order.

Technical Data Sheet — L-BL2 2BL2141 IE3 vacuum pump (EN), ordering code
Cooling & Media
Air cooling requires free ventilation around the motor

The pump is air-cooled and rated IP55. Enclosing it in a tight cabinet or placing it against a wall will reduce heat rejection and raise winding temperature. Maintain clear space around the fan cowl and avoid recirculating hot exhaust air into the intake.

Technical Data Sheet — L-BL2 2BL2141 IE3 vacuum pump (EN), cooling type
Process Limits
Service liquid is required for the liquid ring

As a liquid ring pump, the 2BL2141 needs a service liquid to form the sealing ring. The oil-lubricated designation covers bearings and shaft sealing, not the ring fluid. Loss of service liquid will cause the pump to lose vacuum and may damage the impeller and casing.

Technical Data Sheet — L-BL2 2BL2141 IE3 vacuum pump (EN), operating principle

Selection & Integration Q&A

When should I choose the oil-lubricated 2BL2141 instead of the oil-free liquid ring siblings 2BL2041, 2BL2061 or 2BL2251?

Choose the 2BL2141 when an oil-lubricated bearing arrangement is acceptable and a 3.4 kW motor matches the duty. Select an oil-free sibling when the process cannot tolerate any oil ingress, or when a different motor power (e.g. 4.35 kW on 2BL2061 or 5.6 kW on 2BL2251) is required.

What supply and protection requirements must the electrical integration meet for this model?

The motor is 3.4 kW AC, available in both 50 Hz and 60 Hz variants, with IP55 protection. The exact voltage variant is set by the ordering code suffix (K50-1B, K50-6B or Q50-7B), so the starter and protection settings must be matched to the ordered variant, not to a generic 3.4 kW rating.

What maintenance and consumables are needed, and what is not included in the base delivery?

The pump is oil-lubricated, so lubricant changes are part of routine service; the datasheet does not specify intervals, so follow the full instruction manual. Service liquid for the liquid ring must be provided by the plant. Electrical cables, starters and mating pipework are not part of the base pump delivery.

Dimensional Drawings & Technical Documentation

Technical documentation

PDF
Technical Data Sheet — L-BL2 2BL2141 IE3 vacuum pump (EN)
Datasheet ·266,6 КБ ·3 pp.
View PDF