Agilent Technologies Vacuum Components - Flanges, Fittings, Valves, & Greases
Agilent Technologies ·Made in USA · In Active Production

Agilent Technologies Vacuum Components - Flanges, Fittings, Valves, & Greases

Agilent Technologies Vacuum Components - Flanges, Fittings, Valves, & Greases — Vacuum technologies.

The Agilent Vacuum Components line covers flanges, fittings, valves, and greases for vacuum system construction, not a single pump or instrument. No model-specific performance data is available; selection depends on the required flange standard, fitting size, and valve type. These components serve as the connective hardware between pumps, chambers, and gauges.

Agilent Technologies Vacuum Technologies Series — Model Comparison & Selection

Model Motor power, kWBase pressure, mbarDiffusion pump pumping speed, L/sMaximim width, mmMaximum web width deposited layer, mmMaximum web width electrolytic foil cu al, mm
Vacuum Components - Flanges, Fittings, Valves, & Greases Current ——————
Diffusion Pumps, ——5000065016601300
Helium Leak Detectors for Vacuum & Sniffing Applications ——5000065016601300
Scroll Pumps, Dry, Quiet, Oil-Free Vacuum Pumps 0.1193.3————
Turbo Pumping Systems (TPS), Turbomolecular Pumping Stations —10————

Full specifications

Core Performance & Functional Specifications
Degassing The removal of gas from a material, usually by application of heat under high vacuum.
Electron Charge 1.602 coulomb
Molar Volume 22.41 liters
Acceleration due to gravity mfr 9.8066
Angstrom unit mfr 10 m
Avogadro's number mfr 6.02214076
Boltzmann's constant mfr 1.38064852
Equivalent of heat mfr 4.185
Natural log base mfr 2.7183
Velocity of light mfr 2.9979
Velocity of sound mfr 343
Magnetic flux density mfr 1
Pressure conversion mfr 1 atm
Pumping speed conversion mfr 1 h
Throughput conversion mfr 1 cc/sec
Outgassing rate mfr 2
Molecular density mfr 3.25
Molecular collision rate mfr 3.78 sec
Mean free path mfr 5.1 cm
Monolayer formation time mfr 2.2 sec
Flow/leak rate conversion mfr 1 sccm
Planck's constant mfr 6.62607 sec
ISO/DIS 3556 / 1 mfr Sputter Ion Pumps - Measurement of Performance C
ISO/DIS 3568 mfr Ionization Vacuum Gauges – Calibration by direct
ISO/DIS 3570 / 1 mfr Vacuum Gauges – Standard Methods for Calibration
ISO/DIS 3669 mfr Bakeable Flange Dimensions Dimensions
PN5ASR CC/5 mfr Vacuum Pumps, Acceptance Specifications Refriger
Hydrogen mfr 2
Helium mfr He He
Deuterium mfr 2 H
Methane mfr 4
Ammonia mfr 3
Water (vapour) mfr 2 O
Neon mfr Ne Ne
Nitrogen mfr 2
Oxygen mfr 2
Argon mfr Ar Ar
Carbon dioxide mfr 2
Krypton mfr Kr Kr
Xenon mfr Xe Xe
Mercury mfr Hg Hg
Critical forepressure mfr See maximum tolerable foreline pressure. pressur
Convection mfr The transfer of heat from one place to another b
Desorption mfr See outgassing. outgassing.
Evaporation mfr The process that happens when a liquid or solid
Dynamic seal mfr A seal that moves. moves.
Gas density mfr The number of molecules per unit of volume. volu
High vacuum mfr 10
Gas load mfr See pressure, gauge. gauge.
General gas law mfr 1
Foreline valve mfr A vacuum valve placed in the foreline to permit
Implosion mfr In vacuum work, the inward collapse of the walls
Foreline mfr The section of a pump through which the gases le
viscous flow pressure limit mfr 1 millibar
molecular flow pressure limit mfr 10 millibar
pump-down equation upper validity mfr 1 mbar
diffusion pump intake pressure limit mfr 2 mTorr
diffusion pump forepressure limit mfr 500 mTorr
high vacuum range lower bound mfr 10 Torr
rough vacuum range upper bound mfr 10 Torr
ultrahigh vacuum range lower bound mfr 10 Torr
ultrahigh vacuum range upper bound mfr 10 Torr
throughput to power conversion mfr 5.70 watt
Dimensions, Weight & Mechanical Design
Atomic Mass Unit 1.6605 grams
Helium mass spectrometer leak detector (hmsld) mfr See mass spectrometer leak detector. detector.
Standards, Safety & General Data
Standard pressure mfr 1013 mbar
DIN 28400 mfr Vacuum Technology; Designations and Definitions
DIN 28401 mfr Graphic Symbols in Vacuum Technology Technology
DIN 28402 mfr Vacuum Technology: Variables, Symbols, Units - O
DIN 28403 ISO 1609 PNEUROP 6606 mfr Vacuum Technology; Quick Connections, Small Flan
DIN 28404 ISO 1609 PNEUROP 6606 mfr Vacuum Technology: Flanges, Dimensions Dimension
DIN 28410 mfr Vacuum Technology; Mass Spectrometer Partial Pre
DIN 28411 ISO 3530.2 mfr Mass Spectrometer type Leak Detector Calibration
DIN 28416 mfr Calibration of Vacuum Gauges – General Method Me
DIN 28417 mfr Measurement of Throughput by Volumetric Method M
DIN 28418 ISO/DIS 3567 mfr Vacuum Gauges – Calibration by Direct Comparison
DIN 28426, part I, II ISO 1607 / 1,2 PNEUROP 6602 mfr Positive Displacement Vacuum Pumps- Measurement
DIN 28427 ISO 1608 / 1,2 PNEUROP 5607 mfr Vapor Vacuum Pumps - Measurement of Performance
DIN 28428 PNEUROP 5608 mfr Vacuum Technology; Acceptance Specifications for
DIN 28429 PNEUROP 5615 mfr Vacuum Technology; Acceptance Specifications for
DIN 28430 PNEUROP 6601 mfr Measurement of Performance of Ejector Vacuum Pum
ISO 1314 mfr Pressure; Basic Definitions, Units Units
ISO 3529 I,II,III mfr Vacuum Technology Vocabulary Vocabulary
standard atmosphere mfr 101325 pascals

Description

Construction and positioning

Behavior and media

Installation and operation

Integration & Operating Notes

Process Limits
Component ratings must be taken from individual datasheets

The provided facts contain no pressure, temperature, or leak-rate ratings for any flange, fitting, valve, or grease. Engineers must obtain the specific component datasheet to confirm compatibility with the system's base pressure, bakeout temperature, and gas load.

Factory Specification Sheet

Selection & Integration Q&A

When should I choose a component from this flanges/fittings/valves/greases category instead of a complete pump from the same series?

Choose this category when you need to connect, seal, isolate, or maintain an existing vacuum system—flanges to mate components, valves to control flow, greases to lubricate seals. Complete pumps (diffusion, roots, scroll) are separate sibling entries for generating vacuum, not for interconnection.

What compatibility checks are needed when integrating a valve or flange with adjacent pumps and chambers?

Verify the flange standard (e.g., ISO-K, CF), nominal diameter, and seal material match both mating surfaces. Confirm the valve's pressure rating and conductance suit the pump's throughput and the chamber's base pressure. The reference booklet provides conductance formulas and unit conversions to support these calculations.

Are there mounting or environmental limits for these components?

No mounting or environmental limits are stated in the provided facts. In practice, limits depend on the specific component: bakeout temperature for flanges and valves, ambient temperature for elastomer seals, and cleanliness requirements for greases. Always refer to the individual component datasheet.

What maintenance items or accessories are not included with the base components?

The base delivery typically includes only the component itself; consumables such as centering rings, O-rings, clamp bolts, and grease cartridges are usually ordered separately. No specific accessory list is provided in the facts; check the individual product page for optional items and spare parts.

Dimensional Drawings & Technical Documentation

Technical documentation

PDF
Formulas, Properties, and Tables for Vacuum Technology
Brochure ·1,1 МБ ·24 pp.
View PDF