No photo available yet

Agilent Technologies ·Made in USA · In Active Production

Agilent Technologies Analyzers for biodiesel, biofuels

Agilent Technologies Analyzers for biodiesel, biofuels — Gas chromatography.

The Agilent biodiesel/biofuel analyzer is a three-channel gas chromatography system configured to UOP 1945 for determining hydrogen, oxygen, nitrogen, and extended hydrocarbons in biofuel process streams. It is one of the fuel-analyzer family within the 8890 GC energy and chemical portfolio, distinguished by its biofuel-specific method configuration rather than by a dedicated hardware variant. It serves as the compositional measurement stage in biodiesel and biofuel production and quality-control workflows.

Agilent Technologies Energy Chemical GC Analyzers Series — Model Comparison & Selection

Model Typical quantitation limit, mol%Carrier gasAnalysis time, min
Analyzers for biodiesel, biofuels Current 0.01——
Gasoline analyzer, benzene analysis 0.01——
GCxGC-based analyzers, aviation turbine fuels —Hydrogen—
natural gas analyzer, fast analysis times 0.01—20
NGA Analyzer, natural gas analysis 0.01—20
Refinery gas analyzer, four channel multi-dimensional system —Argon—

Full specifications

Core Performance & Functional Specifications
Typical Quantitation Limit 0.01 mol%
Analyzer channels mfr Three-channel channel
Configured per published method mfr 1945 UOP
Analysis capacity for H2 mfr Yes Yes
Analysis capacity for O2 and N2 mfr Yes Yes
Extended hydrocarbon analysis mfr Yes Yes

Description

Construction and series positioning

Analytical behavior

Installation, control and operation

Integration & Operating Notes

Process Limits
Method configuration fixes the analyzable species set

The instrument is configured per UOP 1945 and its three channels are dedicated to H2, O2/N2, and extended hydrocarbons. Samples or target species outside that set require a different series member (for example the refinery gas or natural gas analyzers) rather than reconfiguration of this unit.

Factory Specification Sheet; Brochure 5994-2991EN
Process Limits
Quantitation limit is a typical, not guaranteed, value

The 0.01 mol% figure is stated as typical for the configured method. When specifying the analyzer against a contractual detection requirement, confirm component-specific limits with the method validation data rather than applying the typical value to every species.

Factory Specification Sheet

Selection & Integration Q&A

When should I choose this biofuel analyzer instead of the refinery gas or natural gas analyzer in the same series?

Pick this unit when the sample matrix is biodiesel/biofuel and the required method is UOP 1945 with H2, O2/N2, and extended hydrocarbon channels. For refinery gas streams choose the #600-series RGA options; for natural gas composition choose the #610-series analyzers.

What adjacent system parts must be defined before ordering, given the supplied documents?

The verified material does not specify carrier-gas supply, controller, or software requirements. These must be taken from the site-planning and installation manuals; the brochure digest only confirms the three-channel, UOP 1945 configuration and does not list utilities or mating hardware.

What mounting and duty-cycle limits apply to this analyzer?

No mounting, environmental, or duty-cycle limits are present in the verified facts or the brochure digest. Bench layout, ambient conditions, and continuous-operation limits must be confirmed from the installation manual before committing to a laboratory location.

What maintenance schedule and consumables apply, and what is not included in base delivery?

The supplied documents contain no maintenance intervals, consumable lists, or accessory/cable scope. Columns, gases, and service parts should be confirmed against the instrument manual and order configuration; none can be asserted from the verified facts.

Dimensional Drawings & Technical Documentation

Technical documentation