Agilent Technologies Scroll Pumps, Dry, Quiet, Oil-Free Vacuum Pumps
Agilent Technologies Scroll Pumps, Dry, Quiet, Oil-Free Vacuum Pumps — Vacuum technologies with Motor power 0.119 kW, Pumping speed 3.6 m³/h.
The Agilent IDP-series dry scroll pump is an oil-free, quiet vacuum source with a 60 L/min pumping speed and 3.3 mbar base pressure, driven by a 0.16 HP motor. It is a compact roughing pump for oil-sensitive analytical and laboratory vacuum systems.
Agilent Technologies Vacuum Technologies Series — Model Comparison & Selection
| Model | Motor power, kW | Base pressure, mbar | Diffusion pump pumping speed, L/s | Maximim width, mm | Maximum web width deposited layer, mm | Maximum web width electrolytic foil cu al, mm |
|---|---|---|---|---|---|---|
| Scroll Pumps, Dry, Quiet, Oil-Free Vacuum Pumps Current | 0.119 | 3.3 | — | — | — | — |
| Diffusion Pumps, | — | — | 50000 | 650 | 1660 | 1300 |
| Helium Leak Detectors for Vacuum & Sniffing Applications | — | — | 50000 | 650 | 1660 | 1300 |
| Turbo Pumping Systems (TPS), Turbomolecular Pumping Stations | — | 10 | — | — | — | — |
| Vacuum Components - Flanges, Fittings, Valves, & Greases | — | — | — | — | — | — |
Full specifications
| Motor power | 0.16 HP |
| Pumping speed | 60 L/min |
| Base Pressure | 3.3 mbar |
| IDP-10 mfr | 3810 |
| IDP-10 with inlet isolation valve mfr | 3810 |
| IDP-7/10 tip seal replacement kit mfr | 3807 |
| Exhaust silencer kit mfr | 110 |
| Purge kit mfr | 3807 |
| Gas ballast kit mfr | 3807 |
| Inlet trap mfr | 25 |
| Vibration isolation kit mfr | 110 VIBISOKIT |
| IDP-35 mfr | 3835 |
| IDP-35 with Gauge mfr | 3835 |
| IDP-35 with Inlet Valve mfr | 3835 |
| IDP-35 with Inlet Valve and Gauge mfr | 3835 |
| Inlet HEPA filter, NW40 mfr | 40 |
| HEPA filter, NW25 mfr | 25 |
| IDP-45 mfr | 3845 |
| IDP-45 with Gauge mfr | 3845 |
| IDP-45 with Inlet Valve mfr | 3845 |
| IDP-45 with Inlet Valve and Gauge mfr | 3845 |
| IDP-15 mfr | 3815 |
| IDP-15 with inlet isolation valve mfr | 3815 |
| IDP-15 tip seal replacement kit mfr | 3815 |
| IDP-3 mfr | Vibration isolation kit kit |
| IDP-4 mfr | Replacement filter element element |
| IDP-7 mfr | Vibration isolation kit kit |
| inlet valve closing time mfr | 20 milliseconds |
| inlet valve opening time after power restore mfr | 10 seconds |
| tip seal replacement duration mfr | half an hour hour |
| IDP-4 maintenance duration mfr | 15...30 minutes |
| integrated Pirani gauge pressure range mfr | -4...1000 mbar |
| VPI valve isolation time mfr | 20 ms |
| Operating voltage mfr | 100 VAC |
| IDP-35/IDP-45 supply frequency mfr | 50 Hz |
Description
Construction and series positioning
- Dry scroll, oil-free design eliminates hydrocarbon backstreaming into the vacuum chamber.
- The IDP family spans IDP-3, IDP-4, IDP-7, IDP-10, IDP-15, IDP-35 and IDP-45; this card covers the dry scroll pump line as a whole, not a single size.
- Sibling product lines in the same catalogue are diffusion pumps, Roots pumping systems, turbo pumping systems and helium leak detectors; the scroll pump serves as their backing/roughing stage.
Performance and operating envelope
- Pumping speed 60 L/min; base pressure 3.3 mbar; motor power 0.16 HP.
- Operating voltage is listed as 100 VAC; the family document also describes 100–120/200–240 VAC motor variants and a 24 VDC drive for the IDP-3, so the supply must be confirmed against the ordered variant.
- No digitized curve points were supplied, so no pressure-versus-speed behavior is asserted here.
Drive, control and installation
- The family document covers 50 Hz and 60 Hz operating points; select the motor variant for the local mains frequency.
- No controller, cable or accessory details are given in the supplied digests; refer to the IDP instruction manual for connection and control specifics.
Integration & Operating Notes
The family is offered with 100–120 VAC and 200–240 VAC motors plus a 24 VDC drive on the IDP-3, and with 50 Hz and 60 Hz operating points. Applying the wrong supply or frequency to the delivered unit can stall or damage the motor, so verify the nameplate before connection.
Selection & Integration Q&A
Choose the scroll pump for oil-free roughing down to a 3.3 mbar base pressure at 60 L/min. Roots, turbo and diffusion pumps in the series cover higher pumping speeds or high-vacuum duty and are typically backed by a roughing pump such as this one.
Match the motor variant to the site: 100–120 VAC or 200–240 VAC at the correct 50/60 Hz point, or 24 VDC on the IDP-3. As a backing pump it must be sized against the inlet flow of the high-vacuum stage it supports.
The supplied document digests contain no mounting orientation, ambient temperature or duty-cycle data for this model. Consult the IDP instruction manual before installation; do not assume continuous-duty or any orientation without that confirmation.
The base delivery details, cable set and controller options are not stated in the supplied digests. Tip-seal inspection follows the IDP manual schedule; confirm included accessories and any cabling or inlet fittings with the order documentation.