Shimadzu Nexera Mikros
Shimadzu ·Made in Japan · In Active Production

Shimadzu Nexera Mikros

Shimadzu Nexera Mikros — Mass spectrometers.

The Nexera Mikros is a triple quadrupole LC-MS/MS configured as a microflow LC/MS system, operating at 1–500 µL/min with columns of 0.1–1 mm I.D. This modification is distinguished within the series by its microflow range, enabling sensitive analysis with reduced solvent consumption. It serves as the detection and quantification engine in micro-LC workflows, coupling narrow-bore separations to tandem mass spectrometry.

Direct drop-in replacements

100%
match
⚖️ Compare
86%
match
⚖️ Compare

Full specifications

Core Performance & Functional Specifications
Nebulizing gas flow 3 L/min
Flow rate range mfr 1 to 500 μL/min (Nexera Mikros)
Flow rate (microflow analysis) mfr 5 μL/min (microflow analysis)
Flow rate (semi-microflow analysis) mfr 225 μL/min (semi-microflow analysis)
Column (LC-Mikros pump evaluation) mfr Shim-pack MC C18 (0.3 mm I.D. × ...) (LC-Mikros pump evaluation)
LC flow rate range (micro-LC/MS operation) mfr a few to a few tens μL/min (micro-LC/MS operation)
Test flow rate (low) (sensitivity/robustness evaluation) mfr 2 μL/min (sensitivity/robustness evaluation)
Test flow rate (high) (sensitivity/robustness evaluation) mfr 400 μL/min (sensitivity/robustness evaluation)
Ion intensity (500 pg/mL) (2 μL/min) mfr 5,000 cps (2 μL/min)
Ion intensity (500 pg/mL) (400 μL/min) mfr 1,500 cps (400 μL/min)
Ion intensity (50 pg/mL) (2 μL/min) mfr 10,000 cps (2 μL/min)
Ion intensity (50 pg/mL) (400 μL/min) mfr 500 cps (400 μL/min)
Retention time window (500 pg/mL / 50 pg/mL runs) mfr 12.75–16.5 min (500 pg/mL / 50 pg/mL runs)
Retention time window (LTD4, 50 pg/mL, 5 μL injection) mfr 11.5–13.5 min (LTD4, 50 pg/mL, 5 μL injection)
Ionization (negative ionization) mfr Micro-ESI (negative ionization)
Drying gas mfr Off
Dwell time mfr 115 ms
MRM transition (quantifier), aldosterone (negative) mfr 359.20 > 189.30 m/z (negative)
MRM transition (qualifier), aldosterone (negative) mfr 359.20 > 331.35 m/z (negative)
MRM transition (quantifier), d4-aldosterone mfr 363.00 > 190.20 m/z
Trapping column mfr CERI C8 5 μm 5*0.3 mm
Trapping flow rate mfr 100 μL/min
Microbore column mfr Shimadzu PLONAS C18 2.7 μm 100*0.2 mm
Analytical flow rate mfr 4 μL/min
Serum sample volume mfr 10 μL
Calibration range mfr 1 to 2 500 pg/mL
Lower limit of quantitation (LOQ) (QC, n=3 replicates) mfr 1 pg/mL (QC, n=3 replicates)
Intra-day precision (%RSD) (real samples) mfr < 8 % (real samples)
LOQ accuracy (QC LOQ 1 pg/mL) mfr 103 (mean), 94.4 (min), 114 (max) % (QC LOQ 1 pg/mL)
LOQ precision (%RSD) (QC LOQ 1 pg/mL) mfr 5.2 intra-day, 4.9 inter-day % (QC LOQ 1 pg/mL)
Matrix effect recovery mfr 99 (QC), 103 (solution) %
Dimensions, Weight & Mechanical Design
Column inner diameter range mfr 0.1 to 1 mm (Nexera Mikros)
Mass spectrometer system mfr LCMS-8060
Electrical, Power & Drive Specifications
Probe voltage (negative ionization) mfr -2.4 kV (negative ionization)
Operating Conditions, Environment & Protection
Signal-to-noise ratio improvement (vitamin D metabolites, microflow vs semi-microflow) mfr three- to five-fold (vitamin D metabolites, microflow vs semi-microflow)
Signal-to-noise ratio improvement (Verapamil, microflow vs semi-microflow) mfr five-fold (Verapamil, microflow vs semi-microflow)
Signal-to-noise ratio improvement (Nor-Verapamil, microflow vs semi-microflow) mfr four-fold (Nor-Verapamil, microflow vs semi-microflow)

Description

Construction and positioning

Integration & Operating Notes

Mounting
Ensure proper laboratory environment

Install the system in a stable, temperature-controlled laboratory environment free from excessive vibration and dust. Adequate bench space and ventilation are required to accommodate the instrument and its accessories.

General Laboratory Practice

Selection & Integration Q&A

When should I choose the Nexera Mikros over other triple quadrupole LC-MS/MS systems?

Choose the Nexera Mikros when your application requires microflow LC (1–500 µL/min) and narrow columns (0.1–1 mm I.D.) for high sensitivity and low sample consumption. For conventional flow rates, consider standard-flow models.

What are the requirements for connecting the Nexera Mikros to an LC system?

The LC system must deliver flow rates within 1–500 µL/min and use columns with 0.1–1 mm I.D. Ensure the plumbing and connections are compatible with microflow rates to avoid dead volumes and peak broadening.

What maintenance and accessories are required for the Nexera Mikros?

Regular maintenance includes cleaning the ion source and checking the LC connections. Accessories such as columns, fittings, and calibration solutions are not included in the base delivery and must be ordered separately. Refer to the manual for the maintenance schedule.

Dimensional Drawings & Technical Documentation

Dimensional drawings

performance curve

Click drawing to inspect vector dimensions

Technical documentation

PDF
LC-Mikros Instruction Manual
Manual ·4,2 МБ ·120 pp.
View PDF
PDF
c146-e350
Datasheet ·848,6 КБ ·12 pp.
View PDF
PDF
Development of the Micro-ESI 8060 Micro-Flow Ionization Unit To Provide Both High Sensitivity and High Robustness
Datasheet ·909,6 КБ ·4 pp.
View PDF
PDF
A new method for the analysis of increased D-amino acids in proteins due to aging
Datasheet ·10,6 МБ ·4 pp.
View PDF
PDF
High-Sensitivity Analysis of Aldosterone in Low-Volume Serum Samples using Micro-Flow LC-MS/MS for Clinical Research
Datasheet ·293,8 КБ ·1 pp.
View PDF