Peter Huber Kältemaschinenbau Minichiller 1000 OLÉ Kompakter
Peter Huber Kältemaschinenbau ·Made in Germany · In Active Production

Peter Huber Kältemaschinenbau Minichiller 1000 OLÉ Kompakter

Peter Huber Kältemaschinenbau Minichiller 1000 OLÉ Kompakter — Recirculating chillers.

The Minichiller 1000 OLÉ Kompakter is a compact recirculating chiller with a pressure/suction pump and OLED controller, covering -20 to 40 °C. Its fixed-speed pump delivers up to 24 l/min at 0.7 bar, distinguishing it from the speed-controlled 'P' variants. It serves closed-loop cooling of laboratory and industrial processes requiring a small footprint.

Peter Huber Kältemaschinenbau Minichiller Series — Model Comparison & Selection

Model Noise level, dBControllerSafety classTemperature range, °CInterfacePower supply
Minichiller 1000 OLÉ Kompakter Current —OLÉI / NFL-20–40USB (Device), RS232 Inte208-240V 1~/2~ 50/60Hz
Minichiller 1000w-H Kompakter —Pilot ONEIII / FL-20–100Ethernet, USB (Host u. D208-240V 1~/2~ 50/60Hz
Minichiller 1000w-H OLÉ Kompakter —OLÉIII / FL-20–100USB (Device), RS232 Inte208-240V 1~/2~ 50/60Hz
Minichiller 1000w Kompakter —Pilot ONEI / NFL-20–40Ethernet, USB (Host u. D208-240V 1~/2~ 50/60Hz
Minichiller 1200-H OLÉ Kompakter —OLÉIII / FL-20–100USB (Device), RS232 Inte208-240V 1~/2~ 50/60Hz
Minichiller 1200 OLÉ Kompakter —OLÉI / NFL-20–40USB (Device), RS232 Inte208-240V 1~/2~ 50/60Hz
Minichiller 1200w-H Kompakter —Pilot ONEIII / FL-20–100——
Minichiller 1200w-H OLÉ Kompakter —OLÉIII / FL-20–100USB (Device), RS232 Inte208-240V 1~/2~ 50/60Hz
Minichiller 280 OLÉ Kompakter 53OLÉI / NFL-5–40USB (Device), RS232 Inte220-240V 1~/2~ 50/60Hz
Minichiller 300 OLÉ Kompakter 53OLÉI / NFL-20–40USB (Device), RS232 Inte220-240V 1~/2~ 50/60Hz
Minichiller 300w-H OLÉ Kompakter 51OLÉIII / FL-20–100USB (Device), RS232 Inte220-240V 1~/2~ 50/60Hz
Minichiller 300w OLÉ Kompakter 53OLÉI / NFL-20–40USB (Device), RS232 Inte220-240V 1~/2~ 50/60Hz
Minichiller 600-H OLÉ Kompakter 56OLÉIII / FL-20–100USB (Device), RS232 Inte208-240V 1~/2~ 50/60Hz
Minichiller 600 Kompakter —Pilot ONEI / NFL-20–40Ethernet, USB (Host u. D110-120V 1~ 60Hz
Minichiller 600 OLÉ Kompakter 56OLÉI / NFL-20–40USB (Device), RS232 Inte110-120V 1~ 60Hz
Minichiller 600w OLÉ Kompakter —OLÉI / NFL-20–40USB (Device), RS232 Inte208-240V 1~/2~ 50/60Hz
Minichiller 800 OLÉ Kompakter —OLÉI / NFL-20–40USB (Device), RS232 Inte208-240V 1~/2~ 50/60Hz
Minichiller 800w-H OLÉ Kompakter —OLÉIII / FL-20–100USB (Device), RS232 Inte208-240V 1~/2~ 50/60Hz

Full specifications

Core Performance & Functional Specifications
Maximum delivery flow rate 24 l/min (pressure pump; 0, 7 bar)
Pump connection M16x1 AG male
Pump speed adjustable no
Pump type Pressure- and suction pump
Temperature range -20...40 °C
Dimensions, Weight & Mechanical Design
Weight 36 kg
Electrical, Power & Drive Specifications
Current consumption 4 A (max)
Fuse rating 16 A
Power supply 208-240V 1~/2~ 50/60Hz
Interfaces, Connections & Control
Controller OLÉ
Display resolution 0, 1 K
Digital interface USB (Device), RS232 Interface
Temperature display OLED Display
Materials, Media & Process Compatibility
Refrigerant R-1270 (A3, H220) (1st stage)
Operating Conditions, Environment & Protection
Ambient temperature limit 5...40 °C
Maximum return flow temperature 80 °C
Protection rating IP20
Standards, Safety & General Data
Safety class I / NFL

Description

Construction and series positioning

Behavior and media

Installation, control and operation

Integration & Operating Notes

Mounting
Do not install in an ATEX zone

Operation within a hazardous area can cause explosion due to the flammable R-1270 refrigerant and electrical components. Site the chiller in a non-classified area with adequate ventilation and no ignition sources.

Minichiller Operation Manual, page 13
Mounting
Install a drip tray below the unit

Condensation water and thermal fluid can escape from connections or during maintenance. A drip tray must be installed below the temperature control unit to contain leaks and protect the floor.

Minichiller Operation Manual, page 15
Electrical
Protect electrical lines below the unit from liquid

Condensation can form at the cooling water connections and drip onto cables. Electrical lines directly below the unit must be protected against liquid ingress to prevent shock hazard.

Minichiller Operation Manual, page 28
Process Limits
Return-line temperature must not exceed 80 °C

Higher return temperatures can damage the chiller or invalidate safe operation. Ensure the application's heat load and flow rate keep the return line at or below 80 °C.

Minichiller 1000 OLÉ Datasheet, page 2
Cooling & Media
Use only drinking water or filtered river/sea water for cooling

Sea water must not be used for water cooling. If salts such as chlorides or bromide are added to the water circuit, anti-corrosion agents are mandatory to prevent corrosion damage.

Minichiller Operation Manual, page 28
Cooling & Media
Plastic pump is not compatible with acetone or polyglycols

The standard plastic circulation pump is not resistant to acetone and polyglycols (depending on the manufacturer). These fluids require the optional more resistant pump to avoid pump damage.

Minichiller 1000 OLÉ Datasheet, page 2
Electrical
Voltage and frequency tolerances must be met simultaneously

A combination such as -5% voltage with +2% frequency is not allowed. Verify that the supply remains within EN60034-1 limits under all operating conditions to avoid invalid operation.

Minichiller 1000 OLÉ Datasheet, page 2
Electrical
Country-specific plug must be specified at order

Single/two-phase units are supplied with a power cable and country-specific plug. The plug type must be stated when ordering; otherwise the unit may arrive without a suitable plug for the site.

Minichiller 1000 OLÉ Datasheet, page 2
Maintenance
Drain valve is an optional accessory for fluid changes

A drain valve (#6839) is available as an optional accessory to simplify draining of the heat transfer fluid. Order it with the unit if regular fluid changes or maintenance draining are planned.

Minichiller 1000 OLÉ Datasheet, page 2

Selection & Integration Q&A

When should I choose the Minichiller 1000 OLÉ Kompakter instead of a sibling model like the 1000-H or 1000w-H?

Choose this base model for cooling-only duty with a fixed-speed pump and no heater. The 1000-H adds heating; the 1000w-H offers a wider variant. Select a 'P' model if your application has high pressure drop, since this unit's pump speed is not adjustable.

What are the requirements for connecting the pump to my application's circuit?

The pump connection is M16x1 male; hose connector NW12 and sleeve nuts M16x1 are included. Do not install valves or quick-release couplings in the feed/discharge lines. Ensure at least 2.8 l filling capacity and use a drip tray below the unit.

What are the ambient and installation limits for this chiller?

Ambient temperature must be 5–40 °C. Do not install in an ATEX zone. Electrical lines below the unit must be protected from liquid. Cooling capacity drops as ambient temperature rises, so size with margin in warm rooms.

What maintenance items and accessories are not included in the base delivery?

The drain valve (#6839) is optional. A country-specific plug must be specified at order. Anti-corrosion agents are required if salts are added to the water circuit. No maintenance schedule is detailed in the provided digests; refer to the manual's Service and Maintenance section.

Dimensional Drawings & Technical Documentation

Technical documentation

PDF
Minichiller Operation Manual
Manual ·2,9 МБ ·84 pp.
View PDF
PDF
Minichiller 1000 OLÉ
Datasheet ·104,0 КБ ·2 pp.
View PDF