BINDER KB 470
BINDER KB 470 — Incubators with Temperature 0…70 °C.
The BINDER KB 470 is a 472 L cooling incubator (0…70 °C) in the KB series, distinguished by its 530 W heat compensation and 200 kg load capacity. It provides 0.1 K fluctuation and 0.2 K uniformity for precise temperature control. Its 1.3 kW single-phase design suits standard laboratory installations.
Direct drop-in replacements
BINDER KB Series — Model Comparison & Selection
Full specifications
| Temperature | 0...70 °C |
| Interior volume | 472 L |
| Load per rack | 40 kg |
| Max. heat compensation | 530 W |
| Nominal power | 1.3 kW |
| Permitted load | 200 kg (KB470-230V / KB470UL-120V) |
| Temperature fluctuation | 0.1 K |
| Temperature uniformity | 0.2 K |
| Back wall clearance | 100 mm (KB470-230V / KB470UL-120V) |
| Side wall clearance | 180 mm (KB470-230V / KB470UL-120V) |
| Article Number mfr | 9020 |
| Recovery time after door was opened for 30 s at 37°C mfr | 3 min |
| Depth | 900 mm (KB470-230V / KB470UL-120V) |
| Height | 1951 mm (KB470-230V / KB470UL-120V) |
| Interior width | 656 mm (KB470-230V / KB470UL-120V) |
| Width | 930 mm (KB470-230V / KB470UL-120V) |
| Net weight of the unit (empty) mfr | 212 kg |
| Power frequency | 50 Hz |
| Rated voltage | 220...240 V |
| Unit fuse | 16.0 A |
| Phase (Nominal voltage) mfr | 1 |
Description
Construction and Series Positioning
- The KB 470 is the mid-volume model in the KB cooling incubator series, offering 472 L interior volume versus smaller siblings (KB 65, KB 130, KB 260) and the larger KB 1060.
- It shares the 0…70 °C temperature range with all siblings but provides higher load capacity (200 kg) and heat compensation (530 W) to handle larger thermal loads.
- Net dimensions: 930 mm wide × 1,951 mm high × 900 mm deep; empty weight 212 kg.
Thermal Performance
- Temperature fluctuation of 0.1 K and uniformity of 0.2 K ensure stable conditions for sensitive samples.
- Recovery time after a 30 s door opening at 37 °C is 3 minutes, minimizing process interruption.
- Maximum heat compensation of 530 W allows the unit to counteract external heat loads or internal heat generation.
Installation and Operation
- Requires 220…240 V, 50 Hz single-phase supply with 16 A fuse; nominal power 1.3 kW.
- Minimum clearances: 100 mm at rear and 180 mm at sides for ventilation.
- The KB 470 is compatible with BINDER accessories such as the LED plant light module (max 60 °C) and CO2 control module, but these are not included in base delivery.
Integration & Operating Notes
Exceeding these limits may damage the rack system or compromise temperature uniformity. Distribute samples evenly and verify weight before loading.
Selection & Integration Q&A
Choose the KB 470 when you need 472 L capacity and higher load handling (200 kg total, 40 kg per rack) or greater heat compensation (530 W). Smaller models suit lower volume or lighter loads but share the same temperature range.
Annual electrical safety inspection is mandatory. LED plant light module and CO2 control module are optional accessories. Racks are not included and must be ordered separately if needed.