BINDER BD 400
BINDER ·Made in Germany · In Active Production

BINDER BD 400

BINDER BD 400 — Incubators with Temperature 5…100 °C.

The BD 400 is a 400 L natural-convection incubator with a +5 to 100 °C working range, distinguished within the BD series by its large interior volume and 90 kg total load capacity. It provides stable temperature control (0.1 K fluctuation, 0.5 K uniformity) for high-volume incubation protocols. The unit operates on 230 V single-phase supply and requires 160 mm rear and 100 mm side wall clearances.

Temperature
5…100 °C

Direct drop-in replacements

⚖️ Compare
⚖️ Compare
⚖️ Compare
⚖️ Compare

BINDER BD Series — Model Comparison & Selection

Model Temperature, °CDepth, cmHeating up time to 100 c, minHeight, cmInterior volume, LLoad per rack, kg
BD 400 Current 5–10076.5120102.540035
BD 115 5–10060.59070.511230
BD 23 5–100525949.52012
BD 260 5–10076759425340
BD 56 5–10056.57562.55730
BD 720 5–100879015973745

Full specifications

Core Performance & Functional Specifications
Temperature 5...100 °C
Heating-up time to 100 °C 120 min
Interior volume 400 L
Load per rack 35 kg
Nominal power 0.85 kW
Permitted load 90 kg (BD400-230V / BD400UL-120V)
Temperature fluctuation 0.1 K
Temperature uniformity 0.5 K
Back wall clearance 160 mm (BD400-230V / BD400UL-120V)
Side wall clearance 100 mm (BD400-230V / BD400UL-120V)
Article Number mfr 9010
Recovery time after door was opened for 30 s at 37°C mfr 10 min
Dimensions, Weight & Mechanical Design
Depth 765 mm (BD400-230V / BD400UL-120V)
Height 1025 mm (BD400-230V / BD400UL-120V)
Interior width 1000 mm (BD400-230V / BD400UL-120V)
Width 1235 mm (BD400-230V / BD400UL-120V)
Net weight of the unit (empty) mfr 135 kg
Electrical, Power & Drive Specifications
Power frequency 50 Hz
Rated voltage 230 V
Unit fuse 12.5 A
Phase (Nominal voltage) mfr 1

Description

Construction and Series Positioning

The BD 400 is the largest model in BINDER's BD series of natural-convection incubators, offering 400 L of interior volume compared to smaller siblings such as the BD 260, BD 115, BD 56, and BD 23. All models share the same +5 to 100 °C temperature range, but the BD 400 is uniquely suited for high-throughput applications requiring a large chamber. Its interior dimensions (1,000 mm W × 1,025 mm H × 765 mm D) and 90 kg permitted load (35 kg per rack) accommodate multiple racks or bulky items. The unit is available in two voltage variants: BD400-230V (230 V, 50/60 Hz, CEE 7/7 plug) and BD400UL-120V (120 V, 60 Hz, NEMA 5-15 plug).

Thermal Behavior and Load Considerations

Natural convection ensures gentle, uniform heating without forced air, making the BD 400 suitable for applications sensitive to airflow. Temperature fluctuation is held to 0.1 K and uniformity to 0.5 K across the chamber. Heating from ambient to 100 °C takes 120 minutes, and recovery after a 30-second door opening at 37 °C is 10 minutes. These characteristics support protocols requiring stable long-term incubation. The load capacity (90 kg total, 35 kg per rack) must be respected to avoid compromising airflow and temperature distribution.

Installation and Operation

The unit requires a single-phase 230 V supply (or 120 V for UL variant) with a 12.5 A fuse and 0.85 kW nominal power. Wall clearances of 160 mm at the rear and 100 mm at the sides are mandatory for heat dissipation. The net weight is 135 kg, necessitating a sturdy floor or bench. No additional control interfaces or media connections are specified in the available documentation; operation is via the unit's integrated temperature controller.

Integration & Operating Notes

Mounting
Maintain 160 mm rear and 100 mm side clearances

Insufficient clearance restricts natural convection airflow around the chamber, leading to overheating of components and potential temperature control errors. Ensure the installation location allows these minimum distances from walls or adjacent equipment.

Data Sheet Model BD 400 en.pdf
Electrical
Use a 12.5 A time-delay fuse for 230 V variant

The unit's 0.85 kW nominal power and 12.5 A fuse rating require a dedicated circuit capable of handling inrush current. Verify that the supply can deliver the required current without voltage drop that could affect temperature stability.

Data Sheet Model BD 400 en.pdf
Process Limits
Do not exceed 90 kg total load or 35 kg per rack

Exceeding the permitted load may damage the rack supports or compromise airflow, leading to temperature non-uniformity. Distribute loads evenly and verify rack capacity before loading.

Data Sheet Model BD 400 en.pdf
Maintenance
Periodically inspect door seal and clean interior

The door seal affects temperature recovery and uniformity. Regular inspection for wear and cleaning with mild detergent helps maintain performance. No specific interval is provided; establish a schedule based on usage.

Data Sheet Model BD 400 en.pdf

Selection & Integration Q&A

When should I choose the BD 400 over smaller BD series models like the BD 260 or BD 115?

Choose the BD 400 when you need 400 L capacity and can handle 90 kg total load; it suits high-volume incubation. Smaller models like BD 260 (260 L) or BD 115 (115 L) are better for lower throughput or space-constrained labs, but all share the same temperature range.

What are the electrical supply requirements for the BD 400?

The standard BD400-230V requires 230 V, 50/60 Hz single-phase supply with a 12.5 A fuse and 0.85 kW nominal power. The UL variant BD400UL-120V requires 120 V, 60 Hz. Ensure the circuit can handle the load and provide a reliable earth connection.

What installation clearances are mandatory for the BD 400?

Maintain at least 160 mm clearance at the rear and 100 mm at the sides to allow adequate airflow for natural convection cooling. Failure to do so may cause overheating and affect temperature uniformity.

What maintenance and accessories are required for the BD 400?

Regularly inspect and clean the door seal to maintain temperature recovery. No specific accessories are included beyond the standard unit; racks are optional and must not exceed 35 kg each. Refer to the manual for detailed maintenance intervals.

Dimensional Drawings & Technical Documentation

Technical documentation

PDF
Data Sheet Model BD 400 en
Datasheet ·1,1 МБ ·7 pp.
View PDF