Peter Huber Kältemaschinenbau CC-215B
Peter Huber Kältemaschinenbau CC-215B — Thermostatic baths.
The CC-215B is a 15-litre stainless-steel bath circulator with a variable-speed pressure/suction pump and Pilot ONE controller, rated for 25–200 °C without cooling, 20–200 °C with water cooling, and -30–200 °C with a refrigerator. Its 1.5–2.1 kW heater and ±0.02 K stability distinguish it within the CC-2xxB series by volume and heating power. It serves as a temperature-control source for external circuits or direct bath immersion in laboratory processes.
Direct drop-in replacements
Peter Huber Kältemaschinenbau Mit Edelstahlbaedern Bis 200C Series — Model Comparison & Selection
| Model | Controller | Interface | Pump connection | Temperature range, °C | Weight, kg | Max delivery flow rate, liter/minute |
|---|---|---|---|---|---|---|
| CC-215B Current | Pilot ONE | Ethernet, USB (Host u. D | M16x1 AG male | 25–200 | 12 | — |
| CC-202C | Pilot ONE | Ethernet, USB (Host u. D | M16x1 AG male | 45–200 | 9 | 22 |
| CC-205B | Pilot ONE | Ethernet, USB (Host u. D | M16x1 AG male | 45–200 | 9 | 27 |
| CC-208B | Pilot ONE | Ethernet, USB (Host u. D | M16x1 AG male | 25–200 | 10 | 27 |
| CC-212B | Pilot ONE | Ethernet, USB (Host u. D | M16x1 AG male (Option, # | 25–200 | 11 | 22 |
| CC-220B | Pilot ONE | Ethernet, USB (Host u. D | M16x1 AG male (Option, # | 25–200 | 14 | 27 |
| CC-225B | Pilot ONE | Ethernet, USB (Host u. D | M16x1 AG male (Option, # | 25–200 | 16 | 27 |
| KISS 202C | KISS | USB (Device), RS232 Inte | M16x1 AG male | 45–200 | 8 | 14 |
| KISS 205B Badumwälzthermostat mit Edelstahlbad | KISS | USB (Device), RS232 Inte | M16x1 AG male | 45–200 | 9 | 14 |
| KISS 208B | KISS | USB (Device), RS232 Inte | M16x1 AG male (Option, # | 25–200 | 10 | 14 |
| KISS 212B | KISS | USB (Device), RS232 Inte | M16x1 AG male | 25–200 | 11 | 14 |
| KISS 215B | KISS | USB (Device), RS232 Inte | M16x1 AG male | 25–200 | 12 | 14 |
| KISS 220B | KISS | USB (Device), RS232 Inte | M16x1 AG male (Option, # | 25–200 | 14 | 14 |
| KISS 225B | KISS | USB (Device), RS232 Inte | M16x1 AG male | 25–200 | 16 | 14 |
Full specifications
| Bath volume | 15 l |
| Pump connection | M16x1 AG male (Option, #19607) |
| Pump speed adjustable | Yes |
| Pump type | Pressure and suction pump, variable speed |
| External sensor connection | Pt100 |
| Temperature range | 25...200 °C with cooling unit: -30...200 °C · with water cooling: 20...200 °C |
| Temperature stability mfr | ±0, 02 K |
| Dimensions (W x D x H) mfr | 350 x 375 x 425 mm |
| Heating capacity mfr | 1, 5 - 2, 1 kW |
| Delivery capacity pressure pump max. mfr | 27 l/min; 0, 7 bar l/min; bar |
| Delivery capacity suction pump max. mfr | 22 l/min; 0, 4 bar l/min; bar |
| Bath opening WxD/BD mfr | 290 x 152 / 200 mm |
| Filling volume min. mfr | 11, 3 l |
| Weight | 12 kg |
| Current consumption | 10 A |
| Power supply | 200-240V 1~/2~ 50/60Hz |
| Controller | Pilot ONE |
| Digital interface | Ethernet, USB (Host u. Device), RS232 |
| Ambient temperature limit | 5...40 °C |
| Protection rating | IP20 |
| Safety class | III / FL |
Description
Construction and series positioning
- The CC-215B is a 15-litre bath with a 290 × 152 mm opening and 200 mm depth, housed in a 350 × 375 × 425 mm case weighing 12 kg.
- It sits between the CC-212B and larger siblings in the CC-2xxB series; the CC-202C is a different controller generation, while the CC-205B and CC-208B offer smaller bath volumes.
- Heating capacity is 1.5–2.1 kW, and the unit uses a pressure and suction pump with variable speed and an M16×1 male pump connection (option #19607).
- Temperature stability is stated as ±0.02 K, supported by a Pt100 external sensor connection and adjustable overtemperature protection per DIN 12876 (safety class III / FL).
Thermal behaviour and media
- The achievable temperature range is configuration-dependent: 25–200 °C without cooling, 20–200 °C with water cooling, and -30–200 °C with a refrigerator. No cooling unit is included in the base model.
- The bath bridge includes a hole for a cooling probe, allowing an immersion cooler such as TC45–TC100E to be fitted for sub-ambient work.
- When a Huber pump adapter is used, polyglycol must not be used as the heat transfer fluid.
- The pressure pump delivers up to 27 l/min at 0.7 bar; the suction pump delivers up to 22 l/min at 0.4 bar, supporting external circuit circulation.
Control, installation and operation
- The Pilot ONE controller provides Ethernet, USB (host and device), and RS232 interfaces; the USB port can connect to a PC or notebook for remote control or data transmission with Spy software.
- The unit accepts 200–240 V single- or two-phase supply at 50/60 Hz and draws up to 10 A; branch protection must be sized between 10 A and 16 A, and an external UL 489 branch circuit protection device is required.
- Single- and two-phase devices are delivered with a power cable and country-specific plug that must be specified at order time.
- The enclosure is IP20 and must be operated in ambient temperatures between 5 °C and 40 °C.
- A drain valve with cap (#6839) is available as an accessory for emptying the bath.
Integration & Operating Notes
The unit draws up to 10 A at 200–240 V; a fuse below 10 A will trip under full heating load, while a fuse above 16 A will not protect the supply cable. An external UL 489 branch circuit protection device is also required for compliance.
When a Huber pump adapter is fitted, polyglycol must not be used as the heat transfer fluid. Select an alternative fluid compatible with the adapter materials and the required temperature range.
The base unit reaches 25–200 °C without cooling; water cooling extends the lower limit to 20 °C, and a refrigerator is needed for -30 °C. The bath bridge has a hole for a cooling probe to accept an immersion cooler such as TC45–TC100E.
A drain valve with cap (#6839) is available as an accessory for emptying the bath; it is not part of the base delivery. Plan for it at order time to simplify fluid changes and maintenance.
Selection & Integration Q&A
Choose the CC-215B when a 15-litre bath and 1.5–2.1 kW heating are needed; the CC-212B and CC-205B offer smaller volumes. The CC-202C uses a different controller generation, so select it only if its control features match your requirements.
It accepts 200–240 V single- or two-phase at 50/60 Hz and draws up to 10 A. Provide branch protection between 10 A and 16 A with an external UL 489 device, and specify the country-specific plug at order time.
No. Without cooling the range is 25–200 °C; water cooling extends it to 20 °C, and a refrigerator is required for -30 °C. The bath bridge has a hole for an immersion cooler such as TC45–TC100E.
The drain valve with cap (#6839) is an accessory for emptying the bath and is not included. The country-specific power plug must also be specified at order time; no cooling unit is part of the base model.