Peter Huber Kältemaschinenbau KISS 212B
Peter Huber Kältemaschinenbau KISS 212B — Thermostatic baths.
The KISS 212B is a 10.5 l stainless-steel bath immersion circulator with a pressure/suction pump (14 l/min at 0.25 bar) and 1.5–2.1 kW heating, covering 25–200 °C without cooling, 20–200 °C with water cooling, and -30–200 °C with a refrigerator. Its non-variable pump and IP20 enclosure distinguish it from larger CC-series siblings, suiting closed-loop temperature control of external jacketed vessels and bath-mounted sample work.
Direct drop-in replacements
Peter Huber Kältemaschinenbau Mit Edelstahlbaedern Bis 200C Series — Model Comparison & Selection
| Model | Controller | Interface | Pump connection | Temperature range, °C | Weight, kg | Max delivery flow rate, liter/minute |
|---|---|---|---|---|---|---|
| KISS 212B Current | KISS | USB (Device), RS232 Inte | M16x1 AG male | 25–200 | 11 | 14 |
| CC-202C | Pilot ONE | Ethernet, USB (Host u. D | M16x1 AG male | 45–200 | 9 | 22 |
| CC-205B | Pilot ONE | Ethernet, USB (Host u. D | M16x1 AG male | 45–200 | 9 | 27 |
| CC-208B | Pilot ONE | Ethernet, USB (Host u. D | M16x1 AG male | 25–200 | 10 | 27 |
| CC-212B | Pilot ONE | Ethernet, USB (Host u. D | M16x1 AG male (Option, # | 25–200 | 11 | 22 |
| CC-215B | Pilot ONE | Ethernet, USB (Host u. D | M16x1 AG male | 25–200 | 12 | — |
| CC-220B | Pilot ONE | Ethernet, USB (Host u. D | M16x1 AG male (Option, # | 25–200 | 14 | 27 |
| CC-225B | Pilot ONE | Ethernet, USB (Host u. D | M16x1 AG male (Option, # | 25–200 | 16 | 27 |
| KISS 202C | KISS | USB (Device), RS232 Inte | M16x1 AG male | 45–200 | 8 | 14 |
| KISS 205B Badumwälzthermostat mit Edelstahlbad | KISS | USB (Device), RS232 Inte | M16x1 AG male | 45–200 | 9 | 14 |
| KISS 208B | KISS | USB (Device), RS232 Inte | M16x1 AG male (Option, # | 25–200 | 10 | 14 |
| KISS 215B | KISS | USB (Device), RS232 Inte | M16x1 AG male | 25–200 | 12 | 14 |
| KISS 220B | KISS | USB (Device), RS232 Inte | M16x1 AG male (Option, # | 25–200 | 14 | 14 |
| KISS 225B | KISS | USB (Device), RS232 Inte | M16x1 AG male | 25–200 | 16 | 14 |
Full specifications
| Alarm output | optic, acoustic |
| Dimensions (w × D × H) | 350 x 375 x 375 mm |
| Maximum delivery flow rate | 14 l/min (pressure pump; 0, 25 bar) |
| Pump connection | M16x1 AG male (Option, #19607) |
| Pump speed adjustable | no |
| Pump type | Pressure and suction pump, speed not variable |
| Temperature range | 25...200 °C with cooling unit: -30...200 °C · with water cooling: 20...200 °C |
| Temperature stability mfr | ±0, 05 K |
| Heating capacity mfr | 1, 5 - 2, 1 kW |
| Delivery capacity suction pump max. mfr | 10, 5 l/min (suction pump; 0, 17 bar) |
| Bath opening WxD/BD mfr | 290 x 152 / 150 mm (WxD/depth) |
| Bath volume mfr | 10, 5 l |
| Filling volume min. mfr | 5, 5 l (minimum) |
| Weight | 11 kg |
| Current consumption | 10 A (max.) |
| Power supply | 200-240V 1~/2~ 50/60Hz |
| Controller | KISS |
| Digital interface | USB (Device), RS232 Interface |
| Temperature display | OLED Display |
| Ambient temperature limit | 5...40 °C |
| Protection rating | IP20 |
| Safety class | III / FL |
Description
Construction and series positioning
- The KISS 212B is a bath-mounted immersion circulator with a 10.5 l stainless-steel bath (minimum filling 5.5 l) and a bath opening of 290 x 152 mm at 150 mm depth.
- It uses the KISS controller with OLED display and a pressure/suction pump that is not speed-variable; the pump delivers up to 14 l/min at 0.25 bar pressure and 10.5 l/min at 0.17 bar suction.
- Within the series, the 212B is the 10.5 l bath variant; the CC-series siblings (CC-202C, CC-205B, CC-208B, CC-212B) are separate models with their own configurations and should not be conflated with this unit.
Thermal behavior and media
- Heating power scales with supply voltage: 1.5 kW at 200 V, 1.6 kW at 208 V, 1.8 kW at 220 V, 2.0 kW at 230 V, and 2.1 kW at 240 V, so heat-up time depends on the actual site voltage.
- The achievable temperature range depends on the cooling method: 25–200 °C without cooling, 20–200 °C with water cooling, and -30–200 °C with a refrigerator. Temperature stability is ±0.05 K.
- The plastic pump is not resistant to acetone or polyglycols; water with glycerin or ethylene glycol is recommended for freeze protection.
Installation, control and operation
- The unit requires a 200–240 V 1~/2~ 50/60 Hz supply with a 10 A minimum and 16 A maximum fuse; an external branch circuit protection device according to UL 489 is required.
- Single- and two-phase devices ship with a country-specific plug that must be specified at order.
- The controller provides USB (Device) and RS232 interfaces, an optical and acoustic alarm output, and an autostart function after power failure that may restart heating and pumping automatically.
- Safety class III / FL with adjustable overtemperature protection per DIN 12876 provides fail-safe protection against overheating.
Integration & Operating Notes
The unit draws a maximum of 10 A and requires a minimum 10 A and maximum 16 A fuse. An external branch circuit protection device according to UL 489 is required for UL-compliant installations, so size the protective device and wiring accordingly.
The enclosure is rated IP20, so it must be installed in a dry location protected from water ingress and access to live parts. Ambient temperature must stay between 5 °C and 40 °C for proper operation; conditions outside this range can affect performance, safety, and warranty.
Without cooling the range is 25–200 °C; with water cooling it extends to 20–200 °C; with a refrigerator it reaches -30–200 °C. Select and connect the cooling utility or chiller before attempting sub-ambient setpoints, and account for the minimum filling of 5.5 l in the 10.5 l bath.
The plastic pump is not resistant to acetone or polyglycols (depending on the manufacturer). For freeze protection, use water with glycerin or ethylene glycol; selecting an incompatible thermofluid can cause chemical attack and pump failure.
The controller has an autostart function for power failure, which may restart heating and pumping automatically. Include this behavior in the risk assessment and process safety concept, especially where unattended restart could be hazardous.
Single- and two-phase devices (100 V to 240 V) ship with a power cable and country-specific plug that must be specified when ordering. Three-phase devices under 63 A ship with cable but no plug, so confirm the plug type for the destination country to avoid ordering delays.
Selection & Integration Q&A
Choose the KISS 212B when you need a 10.5 l stainless-steel bath with a non-variable pressure/suction pump and 1.5–2.1 kW heating for 25–200 °C operation. The CC-series models are separate configurations; compare their bath volumes and pump/control features before selecting a larger or differently controlled unit.
Provide a 200–240 V 1~/2~ 50/60 Hz supply with a 10 A minimum and 16 A maximum fuse, and an external branch circuit protection device according to UL 489. Voltage tolerance is ±10% only if frequency tolerance does not run in the opposite direction.
No. The enclosure is IP20 and must be installed in a dry location protected from water ingress and access to live parts. Ambient temperature must remain between 5 °C and 40 °C for proper operation.
The country-specific plug must be specified at order for single- and two-phase devices. A cooling utility or refrigerator is required for sub-ambient operation, and a compatible thermofluid (water with glycerin or ethylene glycol) must be supplied; acetone and polyglycols are not compatible with the plastic pump.