No photo available yet
Peter Huber Kältemaschinenbau Variostat Kältethermostat für variable Badgefäße
Peter Huber Kältemaschinenbau Variostat Kältethermostat für variable Badgefäße — Thermostatic baths with Noise level 54 dB.
The Variostat is a circulating bath thermostat with a variable-speed pressure/suction pump and Pilot ONE controller, designed for use with variable bath vessels. Its -30 to 150 °C working range and 1 kW heating capacity distinguish it from fixed-bath CC siblings, while cooling capacity falls to 0.03 kW at -30 °C. It serves as a temperature-control source for external circuits requiring up to 25 l/min at 0.7 bar.
Direct drop-in replacements
Peter Huber Kältemaschinenbau Cc Modelle Bis 90C Series — Model Comparison & Selection
| Model | Noise level, dB | Power supply | Pump connection | Temperature range, °C | Weight, kg | Filling volume, m³ |
|---|---|---|---|---|---|---|
| Variostat Kältethermostat für variable Badgefäße Current | 54 | 220-240V 1~/2~ 50/60Hz | M16x1 AG male | -30–150 | 25 | — |
| CC-410wl Kälte-Badumwälzthermostat | — | 220-240V 1~/2~ 50/60Hz | M16x1 AG male | -45–200 | 71 | 0.017 |
| CC-415wl Kälte-Badumwälzthermostat | — | 220-240V 1~/2~ 50/60Hz | M16x1 AG male | -40–200 | 61 | 0.004 |
| CC-508w Kälte-Badumwälzthermostat | 57 | 208-230V 1~/2~ 60Hz | M16x1 AG male | -55–200 | — | 0.004 |
| CC-510w Kälte-Badumwälzthermostat | — | 400V 3~N 50Hz | M16x1 AG male | -50–200 | 106 | 0.016 |
| CC-515w Kälte-Badumwälzthermostat | — | 400V 3~N 50Hz | M16x1 AG male | -55–200 | 105 | 0.016 |
| CC-520w Kälte-Badumwälzthermostat | — | 400V 3~N 50Hz | M16x1 AG male | -55–200 | 161 | 0.015 |
| CC-525w Kälte-Badumwälzthermostat | — | 400V 3~N 50Hz | M16x1 AG male | -55–200 | 163 | 0.015 |
| CC-905 Kälte-Badumwälzthermostat | 64 | 400V 3~N 50Hz | M16x1 AG male | -90–200 | 171 | 0.019 |
| CC-905w Kälte-Badumwälzthermostat | — | 400V 3~N 50Hz | M16x1 AG male | -90–200 | 175 | 0.019 |
| CC-906w Kälte-Badumwälzthermostat | — | 460V 3~ 60Hz | M16x1 AG male | -90–200 | 234 | 0.025 |
| CC-K12 Kälte-Badthermostat | — | 220-240V 1~/2~ 50/60Hz | (Option, #19607) | -20–200 | 29 | 0.007 |
| CC-K15 Kälte-Badthermostat | — | 220-240V 1~/2~ 50/60Hz | (Option, #19607) | -20–200 | 28 | — |
| CC-K20 Kälte-Badthermostat | 50 | 220-240V 1~/2~ 50/60Hz | (Option, #19607) | -30–200 | 41 | 0.012 |
| CC-K25 Kälte-Badthermostat | 50 | 220-240V 1~/2~ 50/60Hz | (Option, #19607) | -30–200 | 41 | 0.017 |
| CC-K6 Kälte-Badumwälzthermostat | 57 | 208-240V 1~/2~ 50/60Hz | M16x1 AG male | -25–200 | 25 | — |
Full specifications
| Noise level | 54 dB(A) |
| Heating capacity | 1 kW |
| Maximum delivery flow rate | 25 l/min (pressure pump max.; 0, 7 bar) |
| Pump connection | M16x1 AG male |
| Pump speed adjustable | Yes |
| Pump type | Pressure and suction pump, variable speed |
| Refrigerator | air-cooled, natural refrigerant |
| External sensor connection | Pt100 |
| Temperature range | -30...150 °C |
| Temperature stability mfr | ±0, 02 K |
| Dimensions (W x D x H) mfr | 183 x 493 x 443 mm |
| Delivery capacity suction pump max. mfr | 18, 5 l/min (suction pump max.; 0, 4 bar) |
| Weight | 25 kg |
| Power supply | 220-240V 1~/2~ 50/60Hz |
| Controller | Pilot ONE |
| Digital interface | Ethernet, USB (Host u. Device), RS232 |
| Refrigerant | R-290 (A3, H220) |
| Maximum viscosity | 50 mm²/s |
| Ambient temperature limit | 5...40 °C |
| Protection rating | IP20 |
| Cooling capacity mfr | 100:0, 3; 20:0, 3; 0:0, 2; -10:0, 18; -20:0, 12; |
| Safety class | III / FL |
Description
Construction and series positioning
- The Variostat is a refrigerated circulating thermostat with an air-cooled condenser using R-290 (A3, H220) natural refrigerant; it is not a fixed-bath unit like the CC-405w/410wl/415wl/505wl siblings, but is intended for variable bath vessels.
- Pump connections are M16x1 male; the pump is a variable-speed pressure and suction type, with maximum delivery 25 l/min at 0.7 bar (pressure side) and 18.5 l/min at 0.4 bar (suction side).
- Controller is Pilot ONE; interfaces include Ethernet, USB (host and device) and RS232; an external Pt100 sensor can be connected.
- Dimensions 183 x 493 x 443 mm, weight 25 kg; protection IP20; safety class III/FL.
Behavior under load and media
- Temperature range -30 to 150 °C; temperature stability ±0.02 K.
- Cooling capacity is strongly temperature-dependent: 0.3 kW at 100 °C and 20 °C, 0.2 kW at 0 °C, 0.18 kW at -10 °C, 0.12 kW at -20 °C, and 0.03 kW at -30 °C. The process heat load must be checked against these values at the actual working temperature.
- Maximum permissible kinematic viscosity is 50 mm²/s, limiting the use of very viscous bath fluids at low temperatures.
- Heating capacity is 1 kW.
Installation, connection and operation
- Power supply: 220-240 V, 1~/2~, 50/60 Hz; a country-specific plug must be specified at ordering. Voltage tolerance ±5% and frequency tolerance ±2%, but the combination of -5% voltage and +2% frequency is not allowed.
- Ambient temperature range 5 to 40 °C; air-cooled condenser requires sufficient clearance and cool intake air, as capacity drops with rising ambient temperature.
- Adjustable overtemperature protection according to DIN 12876 must be set for the application.
- EMC classification Class A, Group 1 (EN55011) — may require additional measures in residential or sensitive environments.
- Remote control and data transmission via USB (with Spy software) and network port.
Integration & Operating Notes
The published cooling capacity falls sharply at low temperatures, so the process heat load at the coldest set point must be verified against the curve. Exceeding the available capacity at the working temperature will prevent the bath from reaching or holding set point.
The supply tolerance is ±5% voltage and ±2% frequency, but the specific combination of -5% voltage and +2% frequency is not allowed. Site power quality must be checked before commissioning to avoid operating outside the permitted envelope.
Because the unit is air-cooled, sufficient clearance and cool intake air are required; cooling capacity drops as ambient temperature rises. The permitted ambient range is 5 to 40 °C, and installation must respect this for reliable operation.
The maximum permissible kinematic viscosity is 50 mm²/s. Very viscous fluids at low temperatures can overload the pump and impair circulation, so fluid selection must account for viscosity at the lowest operating temperature.
The refrigerant is R-290 (propane, A3, H220), a flammable natural refrigerant. This affects room ventilation and ignition-source assessment; installation location and safety review must account for the A3 classification.
The Pilot ONE controller supports remote control and data transmission via the USB port (with Spy software) and via the network port. This enables integration into lab data acquisition and remote operation.
Single/two-phase devices are supplied with a power cable and a country-specific plug that must be specified when ordering. The correct mains connection for the installation site must be confirmed before delivery.
The unit has adjustable overtemperature protection according to DIN 12876, which must be set for the application to protect the bath and process from overheating if the control loop fails.
Selection & Integration Q&A
Choose the Variostat when the bath vessel is variable and must be connected externally; the CC-405w/410wl/415wl/505wl are fixed-bath circulating thermostats. The Variostat provides pressure and suction pump connections (M16x1) for external circuits up to 25 l/min at 0.7 bar.
Pump connections are M16x1 male, so mating fittings and hoses must match this thread. The pressure pump delivers up to 25 l/min at 0.7 bar and the suction pump up to 18.5 l/min at 0.4 bar; external tubing and heat exchangers must be sized within this flow and pressure-drop budget.
Permitted ambient range is 5 to 40 °C; the air-cooled condenser requires sufficient clearance and cool intake air, and capacity drops as ambient temperature rises. Supply tolerance is ±5% voltage and ±2% frequency, but -5% voltage with +2% frequency is not allowed.
The power cable is supplied with a country-specific plug that must be specified at ordering. USB Spy software is referenced for PC connection but is not stated as included. No maintenance schedule or consumables are specified in the provided datasheet; overtemperature protection must be set per DIN 12876.